-# 2026-05-01 09:20:02 by RouterOS 7.22\r
-# software id = 2961-C4ZZ\r
+# 2026-06-12 07:20:04 by RouterOS 7.23.1\r
+# software id = A8L5-07YF\r
#\r
-# model = RBD52G-5HacD2HnD\r
-# serial number = HCX084RAVFA\r
+# model = RB952Ui-5ac2nD\r
+# serial number = D3D50CEDCD38\r
/interface bridge\r
-add admin-mac=48:8F:5A:60:A1:0B auto-mac=no name=Bridge-LAN port-cost-mode=\\r
- short\r
+add dhcpv6-agent-circuit-id="\$(INTERFACE):\$(VID)" dhcpv6-agent-remote-id=\\r
+ "\$(BRIDGEMAC)" name=Bridge-LAN port-cost-mode=short\r
/interface ethernet\r
-set [ find default-name=ether1 ] comment="WAN - Unet" mac-address=\\r
- F6:BE:9D:85:53:F5 name="ether1 - Unet"\r
-set [ find default-name=ether3 ] comment=LEN\r
-set [ find default-name=ether4 ] comment=NUC\r
-/interface l2tp-server\r
-add comment=Server disabled=yes name=l2tp-in1 user=vados\r
-/interface l2tp-client\r
-add comment="Starless 2 MikroSPb" connect-to=176.53.203.171 name=l2tp-EoIP \\r
- user=vados\r
-add allow=mschap2 allow-fast-path=yes comment=Starless connect-to=\\r
- vpn.starless.ru max-mru=1280 name=l2tp-vpn use-ipsec=yes use-peer-dns=yes \\r
- user=vados\r
+set [ find default-name=ether1 ] comment="WAN - Unet" loop-protect=off name=\\r
+ "ether1 - Unet" rx-flow-control=auto tx-flow-control=auto\r
+set [ find default-name=ether2 ] comment=LAN-2\r
+set [ find default-name=ether3 ] advertise="10M-baseT-half,10M-baseT-full,100M\\r
+ -baseT-half,100M-baseT-full,1G-baseT-full,1G-baseX" comment=LAN-3\r
+set [ find default-name=ether4 ] comment=LAN-4\r
+set [ find default-name=ether5 ] advertise="10M-baseT-half,10M-baseT-full,100M\\r
+ -baseT-half,100M-baseT-full,1G-baseT-full,1G-baseX" comment=LAN-5 \\r
+ loop-protect=on poe-out=off rx-flow-control=auto tx-flow-control=auto\r
/interface wireless\r
-# managed by CAPsMAN\r
-# channel: 2422/20-Ce/gn(17dBm), SSID: vados, local forwarding\r
-set [ find default-name=wlan1 ] ampdu-priorities=0,1,2,3,4,5,6,7 band=\\r
- 2ghz-b/g/n basic-rates-a/g=\\r
- 6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps basic-rates-b=\\r
- 1Mbps,2Mbps,5.5Mbps,11Mbps channel-width=20/40mhz-XX country=belarus \\r
- disabled=no frequency=auto hw-protection-mode=rts-cts mode=ap-bridge \\r
- rate-set=configured skip-dfs-channels=10min-cac ssid=vados \\r
- station-roaming=enabled wds-default-bridge=Bridge-LAN wds-mode=\\r
- dynamic-mesh wireless-protocol=802.11 wmm-support=enabled wps-mode=\\r
- disabled\r
-# managed by CAPsMAN\r
-# channel: 5260/20-Ceee/ac/DP(17dBm), SSID: vados5g, local forwarding\r
-set [ find default-name=wlan2 ] ampdu-priorities=0,1,2,3,4,5,6,7 band=\\r
- 5ghz-a/n/ac basic-rates-a/g=\\r
- 6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps channel-width=\\r
- 20/40/80mhz-XXXX country=belarus disabled=no frequency=auto \\r
- hw-protection-mode=rts-cts mode=ap-bridge rate-set=configured \\r
- skip-dfs-channels=10min-cac ssid=vados5g station-roaming=enabled \\r
- wds-default-bridge=Bridge-LAN wds-mode=dynamic-mesh wireless-protocol=\\r
- 802.11 wmm-support=enabled wps-mode=disabled\r
+set [ find default-name=wlan1 ] country=belarus disabled=no mode=ap-bridge \\r
+ ssid=vados wireless-protocol=802.11\r
+set [ find default-name=wlan2 ] country=belarus disabled=no mode=ap-bridge \\r
+ ssid=vados5g wireless-protocol=802.11\r
/interface wireguard\r
-add listen-port=13231 mtu=1280 name=WG\r
-/interface wireless nstreme\r
-# managed by CAPsMAN\r
-# channel: 2422/20-Ce/gn(17dBm), SSID: vados, local forwarding\r
-set wlan1 enable-nstreme=yes\r
-# managed by CAPsMAN\r
-# channel: 5260/20-Ceee/ac/DP(17dBm), SSID: vados5g, local forwarding\r
-set wlan2 enable-nstreme=yes\r
-/caps-man security\r
-add authentication-types=wpa-psk,wpa2-psk encryption=aes-ccm \\r
- group-encryption=aes-ccm name=security\r
-/caps-man configuration\r
-add channel.band=2ghz-b/g/n .control-channel-width=20mhz .extension-channel=\\r
- XX country=belarus datapath.client-to-client-forwarding=yes \\r
- .local-forwarding=yes name=cfg-2ghz security=security ssid=vados\r
-add channel.band=5ghz-a/n/ac .control-channel-width=20mhz .extension-channel=\\r
- XXXX country=belarus datapath.client-to-client-forwarding=yes \\r
- .local-forwarding=yes name=cfg-5ghz-ac security=security ssid=vados5g\r
-add channel.band=5ghz-a/n .control-channel-width=20mhz .extension-channel=XX \\r
- country=belarus datapath.client-to-client-forwarding=yes \\r
- .local-forwarding=yes name=cfg-5ghz-an security=security ssid=vados5g\r
-/disk\r
-add media-interface=lo slot=tmpfs tmpfs-max-size=44739242 type=tmpfs\r
+add listen-port=29185 mtu=1420 name=WG\r
/interface list\r
-add comment=defconf name=WAN\r
-add comment=defconf name=LAN\r
-/interface lte apn\r
-set [ find default=yes ] ip-type=ipv4 use-network-apn=no\r
-/interface wifi channel\r
-add band=5ghz-ax disabled=no frequency=5180,5200,5220,5240 name=5G-AX\r
-add band=5ghz-ac disabled=no frequency=5180,5200,5220,5240 name=5G-AC\r
-add band=2ghz-n disabled=no frequency=2422,2442,2462 name=2G-N\r
-add band=2ghz-ax disabled=no frequency=2422,2442,2462 name=2G-AX\r
-add band=2ghz-g disabled=no frequency=2422,2442,2462 name=2G-G\r
-add band=5ghz-n disabled=no frequency=5180,5200,5220,5240 name=5G-AN\r
-/interface wifi datapath\r
-add bridge=Bridge-LAN disabled=no interface-list=all name=xs-DataPath\r
-/interface wifi security\r
-add authentication-types=wpa2-psk,wpa3-psk disabled=no group-encryption=ccmp \\r
- group-key-update=1h management-protection=allowed name=sec2g\r
-add authentication-types=wpa3-psk disable-pmkid=yes disabled=no \\r
- group-encryption=ccmp group-key-update=5m management-encryption=cmac \\r
- management-protection=required name=sec5G\r
-/interface wifi configuration\r
-add channel=2G-AX datapath=xs-DataPath disabled=no mode=ap name=2G-AX \\r
- security=sec2g security.ft=yes .ft-over-ds=yes ssid=vados\r
-add channel=2G-N datapath=xs-DataPath disabled=no mode=ap name=2G-N security=\\r
- sec2g security.ft=yes .ft-over-ds=yes ssid=vados\r
-add channel=5G-AX disabled=no mode=ap name=5G-AX security=sec5G security.ft=\\r
- yes .ft-over-ds=yes ssid=vados\r
-add channel=5G-AC datapath=xs-DataPath disabled=no mode=ap name=5G-AC \\r
- security=sec5G security.authentication-types="" .ft=yes .ft-over-ds=yes \\r
- ssid=vados\r
-add channel=2G-G datapath=xs-DataPath disabled=no mode=ap name=2G-G security=\\r
- sec2g security.authentication-types="" .ft=yes .ft-over-ds=yes ssid=vados\r
-add channel=5G-AN disabled=no mode=ap name=5G-AN security=sec5G ssid=vados\r
+add name=LAN\r
+add exclude=LAN name=WAN\r
+add exclude=LAN include=WAN name=Internet\r
/interface wireless security-profiles\r
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk mode=\\r
dynamic-keys supplicant-identity=MikroTik\r
add name=master options=HostName\r
add name=MikroYellow options=HostName\r
add name="=\"Client ID\"" options=HostName\r
-add name=mVados options=HostName\r
-add name=hostname-search-set options=HostName\r
/ip dns forwarders\r
-add comment=BS dns-servers=1.1.1.1,1.0.0.1 name=blsp.at verify-doh-cert=no\r
+add dns-servers=1.1.1.1,1.0.0.1 name=blsp.at verify-doh-cert=no\r
add comment=Kra dns-servers=1.0.0.1,1.1.1.1 name=slon2.to verify-doh-cert=no\r
add dns-servers=1.1.1.1,1.0.0.1 name=slon3.at verify-doh-cert=no\r
add dns-servers=1.0.0.1,1.1.1.1 name=slon3.cc verify-doh-cert=no\r
add dns-servers=1.1.1.1,1.0.0.1 name=bs2web.at verify-doh-cert=no\r
add dns-servers=1.1.1.1,1.0.0.1 name=bs2best.at verify-doh-cert=no\r
add dns-servers=1.0.0.1,1.1.1.1 name=psrms.is verify-doh-cert=no\r
-add dns-servers=1.0.0.1,1.1.1.1 name=m.blsp.at verify-doh-cert=no\r
-add comment=telegram disabled=yes dns-servers=10.30.30.81 name=\\r
- api.telegram.org verify-doh-cert=no\r
+add dns-servers=10.30.30.81 name=reg.vados.ru verify-doh-cert=no\r
/ip ipsec proposal\r
set [ find default=yes ] disabled=yes\r
/ip pool\r
-add name=dhcp ranges=10.30.30.150-10.30.30.200\r
+add name=dhcp ranges=10.30.30.83-10.30.30.254\r
/ip dhcp-server\r
-add add-arp=yes address-pool=dhcp dhcp-option-set=domain-search-set \\r
- dynamic-lease-identifiers=client-mac,client-id,opt-82 interface=\\r
- Bridge-LAN lease-time=10m name=masterDHCP server-address=10.30.30.81 \\r
- use-reconfigure=yes\r
-/ip hotspot user profile\r
-set [ find default=yes ] address-pool=dhcp\r
+add add-arp=yes address-pool=dhcp always-broadcast=yes bootp-support=none \\r
+ dhcp-option-set=domain-search-set interface=Bridge-LAN lease-time=10m \\r
+ name=masterDHCP server-address=10.30.30.81\r
/ip smb users\r
set [ find default=yes ] disabled=yes\r
add disabled=yes name=vados\r
+/ipv6 dhcp-client option\r
+add code=119 name=domain-search-list value="0x03'WORKGROUP'0x00"\r
+add code=12 name=HostName value="\$(HOSTNAME)"\r
+add code=61 name=DUID value=0x00030001488f5a8e1abc\r
+add code=61 name=clientid\r
+/ipv6 dhcp-server option\r
+add code=119 name=domain-search-list value="0x03'WORKGROUP'0x00"\r
+add code=12 name=HostName value="\$(HOSTNAME)"\r
+add code=61 name=CLIENT_DUID\r
+add code=61 name=CLIENT_MAC\r
/ppp profile\r
set *FFFFFFFE use-upnp=no\r
/routing bgp template\r
set default disabled=no output.network=bgp-networks\r
/routing table\r
add disabled=no fib name=To-VPN\r
-/snmp community\r
-set [ find default=yes ] addresses=10.30.30.0/24 read-access=no security=\\r
- private\r
/system logging action\r
add email-start-tls=yes email-to=vados@vados.ru name=email target=email\r
/system script\r
-add comment="Example add WU servers to AddrList" dont-require-permissions=no \\r
- name=WU-add-to-list owner=vados policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="#\\r
- \_Script to add target web sites DNS IP addresses into address list\r\\r
- \n# Tested with Mikrotik 6.4x\r\\r
- \n# Syed Jahanzaib / aacable@hotmail.com\r\\r
- \n# List name\r\\r
- \n:local LISTNAME \"windowsupdateslist\"\r\\r
- \n# Web site names which will be added in address list\r\\r
- \n:local TARGET1 \"update.microsoft.com\"\r\\r
- \n:local TARGET2 \"download.windowsupdate.com\"\r\\r
- \n:local TARGET3 \"download.microsoft.com\"\r\\r
- \n:local TARGET4 \"windowsupdate.com\"\r\\r
- \n:local TARGET5 \"ntservicepack.microsoft.com\"\r\\r
- \n:local TARGET6 \"wustat.windows.com\"\r\\r
- \n:local TARGET7 \"stats.microsoft.com\"\r\\r
- \n:local TARGET8 \"mp.microsoft.com\"\r\\r
- \n:local TARGET9 \"ws.microsoft.com\"\r\\r
- \n:local TARGET10 \"sls.update.microsoft.com.akadns.net\"\r\\r
- \n:local TARGET11 \"vortex.data.microsoft.com\"\r\\r
- \n:local TARGET12 \"vortex-win.data.microsoft.com\"\r\\r
- \n:local TARGET13 \"fe2.update.microsoft.com.akadns.net\"\r\\r
- \n:local TARGET14 \"statsfe2.update.microsoft.com.akadns.net\"\r\\r
- \n \r\\r
- \n# 1st time runner, check if address list is not created previously and a\\r
- dd entries in it for 1st time usage\r\\r
- \n:if ( [/ip firewall address-list find where list=\$LISTNAME] = \"\") do=\\r
- {\r\\r
- \n:log warning \"No address list for \$TARGET1 found ! creating and adding\\r
- \_resolved entry for 1st time usage ... zaib\"\r\\r
- \n \r\\r
- \n:local FirstAddr [resolve \$TARGET1];\r\\r
- \n\r\\r
- \n/ip firewall address-list add address=\$FirstAddr list=\$LISTNAME commen\\r
- t=\$TARGET1;\r\\r
- \n} else={\r\\r
- \n:log warning \"Previous List for \$LISTNAME found ! moving forward and c\\r
- hecking if DNS entries can be added in it ...\"\r\\r
- \n}\r\\r
- \n \r\\r
- \n# Check DNS entries and collect matching names\r\\r
- \n:foreach i in=[/ip dns cache find name~\"(\$TARGET1|\$TARGET2|\$TARGET3|\\r
- \$TARGET4|\$TARGET5|\$TARGET6|\$TARGET7|\$TARGET8|\$TARGET9|\$TARGET10|\$T\\r
- ARGET11|\$TARGET12|\$TARGET13|\$TARGET14)\" && \$type ~ \"^(A|CNAME)\\\$\"\\r
- \_] do={\r\\r
- \n \r\\r
- \n# Get IP Address from the names and hold it in temporary buffer\r\\r
- \n:local Buffer [/ip dns cache get \$i data];\r\\r
- \ndelay delay-time=10ms\r\\r
- \n \r\\r
- \n# Check if entry is already not exists, then OK, otherwise ignore duplic\\r
- ation\r\\r
- \n:if ( [/ip firewall address-list find where address=\$Buffer] = \"\") do\\r
- ={\r\\r
- \n \r\\r
- \n# Fetch DNS names for the entries\r\\r
- \n:local sitednsname [/ip dns cache get \$i name] ;\r\\r
- \n \r\\r
- \n# Print name in LOG window\r\\r
- \n:log info (\"added entry: \$sitednsname \$Buffer\");\r\\r
- \n \r\\r
- \n# Add IP addresses and there names to the address list\r\\r
- \n/ip firewall address-list add address=\$Buffer list=\$LISTNAME comment=\\r
- \$sitednsname;\r\\r
- \n}\r\\r
- \n}"\r
-add comment="Add Hosts DNS names to NoWG addres list" \\r
- dont-require-permissions=no name=Add2vdsina owner=vados policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="#\\r
- \_Script to add target web sites DNS IP addresses into address list\r\\r
- \n# Tested with Mikrotik 6.4x\r\\r
- \n# \r\\r
- \n# List name\r\\r
- \n:local LISTNAME \"NoWG\"\r\\r
- \n#\r\\r
- \n# Web site names which will be added in address list\r\\r
- \n:local TARGET1 \"comp-lenta.ru\"\r\\r
- \n:local TARGET2 \"ok.ru\"\r\\r
- \n:local TARGET3 \"vk.com\"\r\\r
- \n#:local TARGET4 \"smtp.mail.me.com\"\r\\r
- \n#:local TARGET4 \"windowsupdate.com\"\r\\r
- \n#:local TARGET5 \"ntservicepack.microsoft.com\"\r\\r
- \n#:local TARGET6 \"wustat.windows.com\"\r\\r
- \n#:local TARGET7 \"stats.microsoft.com\"\r\\r
- \n#:local TARGET8 \"mp.microsoft.com\"\r\\r
- \n#:local TARGET9 \"ws.microsoft.com\"\r\\r
- \n#:local TARGET10 \"sls.update.microsoft.com.akadns.net\"\r\\r
- \n#:local TARGET11 \"vortex.data.microsoft.com\"\r\\r
- \n#:local TARGET12 \"vortex-win.data.microsoft.com\"\r\\r
- \n#:local TARGET13 \"fe2.update.microsoft.com.akadns.net\"\r\\r
- \n#:local TARGET14 \"statsfe2.update.microsoft.com.akadns.net\"\r\\r
- \n \r\\r
- \n# 1st time runner, check if address list is not created previously and a\\r
- dd entries in it for 1st time usage\r\\r
- \n:if ( [/ip firewall address-list find where list=\$LISTNAME] = \"\") do=\\r
- {\r\\r
- \n:log warning \"No address list for \$TARGET1 found ! creating and adding\\r
- \_resolved entry for 1st time usage ... zaib\"\r\\r
+add dont-require-permissions=no name=fetchCustom owner=vados policy=\\r
+ ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source=":\\r
+ global GlobalScriptsUrl \"https://ros.vados.ru/\";\r\\r
\n\r\\r
- \n:local FirstAddr [resolve \$TARGET1];\r\\r
+ \n#/tool/fetch mode=https url=(\$GlobalScriptsUrl . \".bak/mikro_bak_rsa@1\\r
+ 0.30.30.86.pub\") dst-path=\"/mikro_bak_rsa@10.30.30.86.pub\";\\r
\n\r\\r
- \n/ip firewall address-list add address=\$FirstAddr list=\$LISTNAME commen\\r
- t=\$TARGET1;\r\\r
+ \n#:local Script AM-setup\\r
+ \n;\r\\r
+ \n#/system/script/add name=\$Script owner=\$Script source=([ /tool/fetch c\\r
+ heck-certificate=yes-without-crl url=(\$GlobalScriptsUrl . \$Script . \".r\\r
+ sc\") output=user as-value ]->\"data\");\r\\r
+ \n\\r
+ \n#/usb1/mikro_bak_rsa.pub\\r
+ \n\\r
\n\r\\r
- \n} else={\r\\r
- \n:log warning \"Previous List for \$LISTNAME found ! moving forward and c\\r
- hecking if DNS entries can be added in it ...\"\r\\r
- \n}\r\\r
+ \n#\\r
\n\r\\r
- \n# Check DNS entries and collect matching names\r\\r
- \n:foreach i in=[/ip dns cache find name~\"(\$TARGET1|\$TARGET2|\$TARGET3|\\r
- \$TARGET4)\" && \$type ~ \"^(A|CNAME)\\\$\" ] do={\r\\r
+ \n#/tool/fetch mode=https url=(\$GlobalScriptsUrl . \".bak/mikro_bak_rsa@1\\r
+ 0.30.30.10.pub\") dst-path=\"/mikro_bak_rsa@10.30.30.10.pub\";\\r
\n\r\\r
- \n:log info (\"start entry: \$c \$sitednsname \$Buffer\");\r\\r
+ \n#\r\\r
+ \n\\r
+ \n#root.mnuc.backuper\\r
+ \n\\r
\n\r\\r
- \n# Get IP Address from the names and hold it in temporary buffer\r\\r
- \n:local Buffer [/ip dns cache get \$i data];\r\\r
- \ndelay delay-time=10ms\r\\r
- \n:log info (\"1: \$Buffer\"); \r\\r
+ \n/tool/fetch mode=https url=(\$GlobalScriptsUrl . \".bak/mikro_bak_rsa@10\\r
+ .30.30.81.pub\") dst-path=\"/mikro_bak_rsa@10.30.30.81.pub\";\r\\r
+ \n\\r
+ \n#:local Script AM-GlobalConfig;\\r
\n\r\\r
- \n# Check if entry is already not exists, then OK, otherwise ignore duplic\\r
- ation\r\\r
- \n:if ( [/ip firewall address-list find where address=\$Buffer] = \"\") do\\r
- ={\r\\r
+ \n#/system/script/add name=\$Script owner=\$Script source=([ /tool/fetch c\\r
+ heck-certificate=yes-without-crl url=(\$GlobalScriptsUrl . \$Script . \".r\\r
+ sc\") output=user as-value ]->\"data\");\r\\r
+ \n\\r
+ \n#/usb1/mikro_bak_rsa.pub\\r
+ \n#:local FetchFile AM-DOHCert.rsc\\r
+ \n\\r
\n\r\\r
- \n:log info (\"2: \$Buffer\"); \r\\r
- \n \r\\r
- \n# Fetch DNS names for the entries\r\\r
- \n:local sitednsname [/ip dns cache get \$i name] ;\r\\r
- \n \r\\r
- \n# Print name in LOG window\r\\r
- \n:log info (\"added entry: \$i \$sitednsname \$Buffer\");\r\\r
- \n \r\\r
- \n# Add IP addresses and there names to the address list\r\\r
- \n/ip firewall address-list add address=\$Buffer list=\$LISTNAME comment=\\r
- \$sitednsname;\r\\r
- \n}\r\\r
- \n}"\r
-add comment="Flush DNS Cache" dont-require-permissions=no name=\\r
- DNS_Flush_Cache owner=vados policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source=\\r
- "/ip dns cache flush"\r
-add dont-require-permissions=no name=create_mkdir_function owner=vados \\r
- policy=read,write source="# Written by Phillip Stromberg in 2019\r\\r
- \n# Distributed under the MIT license\r\\r
- \n# \r\\r
- \n# \r\\r
- \n# this creates a function called \$mkdir\r\\r
- \n# from the command line you will be able to just type \"\$mkdir some/new\\r
- /folder\"\r\\r
- \n# and all the folders that need to be created will be\r\\r
- \n# if the folder already existed, it is ignored\r\\r
- \n\r\\r
- \n:log info \"Creating \\\$mkdir function...\"\r\\r
- \n\r\\r
- \n:global mkdir do={\r\\r
- \n # \$1 refers to the input variable the user passed in to us\r\\r
- \n :local newFolder \$1;\r\\r
- \n\r\\r
- \n # we'll use this variable to report error messages that may arise\r\\r
- \n :local errorMsg;\r\\r
- \n\r\\r
- \n # if the user put a slash on the end of the new folder name, remove \\r
- it\r\\r
- \n # i.e. \"some/test/\" becomes \"some/test\"\r\\r
- \n :while (([:pick \$newFolder ([:len \$newFolder] - 1)]) = \"/\") do={\\r
- \r\\r
- \n :set newFolder [:pick \$newFolder 0 ([:len \$newFolder] - 1)]\r\\r
- \n }\r\\r
\n\r\\r
- \n # if the user put a slash at the beginning of the new folder name, r\\r
- emove it\r\\r
- \n # i.e. \"/some/test\" becomes \"some/test\"\r\\r
- \n :while ([:pick \$newFolder 0] = \"/\") do={\r\\r
- \n :set newFolder [:pick \$newFolder 1 [:len \$newFolder]]\r\\r
- \n }\r\\r
+ \n#\\r
+ \n:global MkDir;\\r
\n\r\\r
- \n :if ([/file find name=\$newFolder] != \"\") do={\r\\r
- \n :set errorMsg \"'\$newFolder' already exists.\";\r\\r
- \n :log debug \"mkdir: \$errorMsg\";\r\\r
- \n :return \$newFolder;\r\\r
- \n }\r\\r
+ \n\\r
+ \n#:local FetchFile Binary.backup\\r
+ \n:local localDir \"\";\\r
+ \n\\r
+ \n\r\\r
+ \n#\$MkDir \$localDir;\r\\r
+ \n\\r
+ \n#\\r
+ \n/tool/fetch mode=https url=(\$GlobalScriptsUrl . \$FetchFile) dst-path=(\\r
+ \$localDir . \$FetchFile);\r\\r
+ \n"\r
+add comment="Global Config Script" dont-require-permissions=no name=\\r
+ AM-GlobalConfig owner=AM-GlobalConfig policy=\\r
+ ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="#\\r
+ !rsc by Vados\r\\r
+ \n# RouterOS script: AM-GlobalConfig\r\\r
+ \n# Script comment: Global Config Script\r\\r
+ \n# Copyright (c) 2007-2026 Vados <vados@vados.ru>\r\\r
+ \n#\r\\r
+ \n#\r\\r
+ \n# Warning: Dont touch this line!\r\\r
+ \n:global Identity [/system/identity/get name];\r\\r
+ \n:global GlobalConfReady false;\r\\r
+ \n#\r\\r
+ \n#\r\\r
+ \n# Global Url For Amster scripts to fetch\r\\r
+ \n# most be defined in AM-Init-Script or AM-setup scripts\r\\r
+ \n:global GlobalScriptsUrl \"https://ros.vados.ru/\";\r\\r
+ \n:global ScriptsUrlSuffix (a);\r\\r
+ \n:global CheckSumsVerify true;\r\\r
\n\r\\r
- \n # the name of the temp file to create\r\\r
- \n :local tempfile \"mkdir_temp_file.txt\";\r\\r
+ \n:global ScriptUpdatesCRLF true;\r\\r
+ \n:global CommentsInScripts true;\r\\r
\n\r\\r
- \n # port 0 is unlikely to be open to HTTP requests...\r\\r
- \n :local fakeURL \"http://127.0.0.1:0/should-not-exist.txt\";\r\\r
+ \n# Debug output:\r\\r
+ \n:global PrintDebug true; #false;\r\\r
\n\r\\r
- \n :local fullTempPath (\$newFolder . \"/\" . \$tempfile);\r\\r
+ \n# Debug output for specific script:\r\\r
+ \n#:set (\$PrintDebugOverride->\"AM-GlobalFunc\") true;\r\\r
\n\r\\r
- \n # this is where the folder creation happens\r\\r
- \n # `as-value` prevents status messages from printing\r\\r
- \n # wrapping in a `:do {...} on-error` prevents error messages from pr\\r
- inting.\r\\r
- \n :do {\r\\r
- \n /tool fetch dst-path=\"\$fullTempPath\" url=\"\$fakeURL\" durati\\r
- on=0.001s as-value;\r\\r
- \n } on-error={}\r\\r
+ \n# Debug logs\r\\r
+ \n# Other actions (disk, email, remote or support) can be used as well.\r\\r
+ \n# I do not recommend using echo - use debug output instead (https://rsc.\\r
+ eworm.de/main/DEBUG.html#debug-output).\r\\r
+ \n#/system/logging/add topics=script,debug action=memory;\r\\r
\n\r\\r
- \n # this waits for the temporary dir to show up so there isn't a race \\r
- \r\\r
- \n # condition where you call mkdir and then try to do something before\\r
- \_the \r\\r
- \n # folder is actually created\r\\r
- \n :local count 0;\r\\r
- \n :while ([/file find name=\"\$newFolder\"] = \"\") do={\r\\r
- \n :if (\$count >= 50) do={\r\\r
- \n # after 50 * 0.1s delays, it's been 5 seconds, which should \\r
- be long enough\r\\r
- \n :set errorMsg \"New folder could not be created at \$newFold\\r
- er\";\r\\r
- \n :log error \"mkdir: \$errorMsg\"\r\\r
- \n :error \$errorMsg\r\\r
- \n }\r\\r
- \n :delay 0.1s;\r\\r
- \n :set count (\$count + 1);\r\\r
- \n }\r\\r
+ \n:global MikrotikUpgradeUrl \"https://upgrade.mikrotik.com/routeros\";\r\\r
+ \n:global Domain \"WORKGROUP\";\r\\r
\n\r\\r
- \n :return \$newFolder;\r\\r
- \n}\r\\r
+ \n:global EmailGeneralTo \"vados@vados.ru\";\r\\r
+ \n#:global EmailGeneralCc \"\";\r\\r
\n\r\\r
- \n:log info \"Created function \\\$mkdir\"\r\\r
- \n"\r
-add comment="Certificates CloudFlare, Quad9 " dont-require-permissions=no \\r
- name=CustomUpdate-Certificates owner=vados policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="#\\r
- \_CloudFlare\r\\r
- \n/tool/fetch mode=https url=https://developers.cloudflare.com/ssl/static/\\r
- origin_ca_ecc_root.pem;\r\\r
- \n/tool/fetch mode=https url=https://cacerts.digicert.com/DigiCertGlobalRo\\r
- otCA.crt.pem;\r\\r
- \n/certificate/import file-name=DigiCertGlobalRootCA.crt.pem passphrase=\"\\r
+ \n# \$ScriptInstallUpdate mod/notification-telegram\r\\r
+ \n:global TelegramTokenId \"8390868324:AAG3_d1hfVR2M6pGAgDK6ZvhOe4J97nyopw\\r
\";\r\\r
- \n/tool/ fetch mode=https url=https://cacerts.digicert.com/DigiCertGlobalG\\r
- 2TLSRSASHA2562020CA1-1.crt.pem;\r\\r
- \n/certificate/import file-name=DigiCertGlobalG2TLSRSASHA2562020CA1-1.crt.\\r
- pem passphrase=\"\";\r\\r
- \n# Quad9\r\\r
- \n/tool/fetch mode=https url=\"https://cacerts.digicert.com/DigiCertGlobal\\r
- G3TLSECCSHA3842020CA1-1.crt.pem\"\r\\r
- \n/certificate/import file-name=DigiCertGlobalG3TLSECCSHA3842020CA1-1.crt.\\r
- pem passphrase=\"\";\r\\r
- \n\r\\r
- \n#:global AmScriptsUrl;\r\\r
- \n#google\r\\r
- \n#:local CertName \"GTS-Root-R1.pem\";\r\\r
- \n#/tool/fetch mode=https url=(\$AmScriptsUrl . \"certs/\" . \$CertName);\\r
- \r\\r
- \n#/certificate/import file-name=\$CertName passphrase=\"\";\r\\r
- \n#:set CertName \"GTS-Root-R4.pem\";\r\\r
- \n#/tool/fetch mode=https url=(\$AmScriptsUrl . \"certs/\" . \$CertName);\\r
- \r\\r
- \n#/certificate/import file-name=\$CertName passphrase=\"\";\r\\r
- \n#:set CertName \"GTS-Root-RX.pem\";\r\\r
- \n#/tool/fetch mode=https url=(\$AmScriptsUrl . \"certs/\" . \$CertName);\\r
- \r\\r
- \n#/certificate/import file-name=\$CertName passphrase=\"\";\r\\r
- \n#internet\r\\r
- \n#:set CertName \"ISRG-Root-X1.pem\";\r\\r
- \n#/tool/fetch mode=https url=(\$AmScriptsUrl . \"certs/\" . \$CertName);\\r
- \r\\r
- \n#/certificate/import file-name=\$CertName passphrase=\"\";\r\\r
- \n#:set CertName \"ISRG-Root-X2.pem\";\r\\r
- \n#/tool/fetch mode=https url=(\$AmScriptsUrl . \"certs/\" . \$CertName);\\r
- \r\\r
- \n#/certificate/import file-name=\$CertName passphrase=\"\";\r\\r
- \n#:set CertName \"Starfield-Root-Certificate-Authority-G2.pem\";\r\\r
- \n#/tool/fetch mode=https url=(\$AmScriptsUrl . \"certs/\" . \$CertName);\\r
- \r\\r
- \n#/certificate/import file-name=\$CertName passphrase=\"\";\r\\r
- \n\r\\r
- \n#/ip/dns/set allow-remote-requests=yes doh-max-concurrent-queries=100 do\\r
- h-max-server-connections=20 use-doh-server=https://security.cloudflare-dns\\r
- .com/dns-query verify-doh-cert=yes;\r\\r
- \n#/ip/dns/static remove [find where address=1.1.1.1];\r\\r
- \n#/ip/dns/static add address=1.1.1.1 name=security.cloudflare-dns.com com\\r
- ment=\"cloudflare-dns IPv4 1\";\r\\r
- \n#/ip/dns/static remove [find where address=1.0.0.1];\r\\r
- \n#/ip/dns/static add address=1.0.0.1 name=security.cloudflare-dns.com com\\r
- ment=\"cloudflare-dns IPv4 2\"\r\\r
- \n#/ip dns static add address=2606:4700:4700::1111 name=security.cloudflar\\r
- e-dns.com type=AAAA\r\\r
- \n#/ip dns static add address=2606:4700:4700::1001 name=security.cloudflar\\r
- e-dns.com type=AAAA\r\\r
- \n#/ip/dns set servers=\"1.0.0.1, 8.8.4.4\";\r\\r
- \n#/ip/dns set servers=\"\";"\r
-add dont-require-permissions=no name=script1 owner=vados policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/\\r
- tool/netwatch/add comment=\"doh-fallback, doh-url=https://security.cloudfl\\r
- are-dns.com/dns-query, doh-cert=DigiCert Global Root CA, notify, name=Clou\\r
- dFlare-doh IPv4 1\" host=1.1.1.1;\r\\r
- \n/tool/netwatch/add comment=\"doh, doh-url=https://security.cloudflare-dn\\r
- s.com/dns-query, doh-cert=DigiCert Global Root CA, notify, name=CloudFlare\\r
- -doh IPv4 2\" host=1.0.0.1;\r\\r
- \n/tool/netwatch/add comment=\"doh-fallback, dns-fallback, doh-url=https:/\\r
- /dns.google/dns-query, doh-cert=DigiCert Global Root G2, notify, name=Goog\\r
- le-doh IPv4 1\" host=8.8.8.8;\r\\r
- \n/tool/netwatch/add comment=\"doh-fallback, dns-fallback, doh-url=https:/\\r
- /dns.google/dns-query, doh-cert=DigiCert Global Root G2, notify, name=Goog\\r
- le-doh IPv4 2\" host=8.8.4.4;\r\\r
- \n/tool/netwatch/add comment=\"doh-fallback, dns-fallback, doh-url=https:/\\r
- /dns.quad9.net/dns-query, doh-cert=DigiCert Global Root G3, notify, name=C\\r
- uad9-doh IPv4 1\" host=9.9.9.9;\r\\r
- \n/tool/netwatch/add comment=\"doh-fallback, dns-fallback, doh-url=https:/\\r
- /dns.quad9.net/dns-query, doh-cert=DigiCert Global Root G3, notify, name=C\\r
- uad9-doh IPv4 2\" host=149.112.112.112;\r\\r
- \n\r\\r
- \n/tool/netwatch/add comment=\"dns, notify, name=ns1.unet.ws\" host=91.192\\r
- .189.2;"\r
-add dont-require-permissions=no name=script2 owner=vados policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="#\\r
- \r\\r
+ \n:global TelegramChatId \"-1003631309063\"; #\"454403445\";\r\\r
+ \n# Use this to send notifications to a specific topic in group.\r\\r
+ \n#:global TelegramThreadId \"30\";\r\\r
+ \n# Using telegram-chat you have to define trusted chat ids (not group ids\\r
+ !)\r\\r
+ \n# or user names. Groups allow to chat with devices simultaneously.\r\\r
+ \n:global TelegramChatIdsTrusted {\r\\r
+ \n \"454403445\"\r\\r
+ \n \"-1003631309063\"\r\\r
+ \n \"-5124482807\"\r\\r
+ \n \"1087968824\";\r\\r
+ \n};\r\\r
+ \n# \"-5294757340\";\r\\r
+ \n\r\\r
+ \n:global TelegramChatGroups \"(all)\";\r\\r
+ \n#:global TelegramChatGroups \"(all|home|office)\";\r\\r
+ \n\r\\r
+ \n:global NotificationFunctions {\r\\r
+ \n \"email\"\r\\r
+ \n \"telegram\";\r\\r
+ \n};\r\\r
+ \n# Toggle this to disable symbols in notifications.\r\\r
+ \n:global NotificationsWithSymbols true;\r\\r
+ \n:global TerminalColorOutput true;\r\\r
+ \n\r\\r
+ \n:global DetectIpAddrDefault \"https://ipv4.mikrotik.ovh/\";\r\\r
+ \n:global DetectIpAddrFallback \"https://api.ipify.org/\";\r\\r
\n\r\\r
- \n:global InspectVar;\r\\r
- \n#:global RouterBoard;\r\\r
- \n#:do {:set RouterBoard [[ :parse \"/system/routerboard/get\" ]]} on-erro\\r
- r={}\r\\r
- \n#:global Resources;\r\\r
- \n#:do {:set Resources [[ :parse \"/system/resource/get\" ]]} on-error={}\\r
- \r\\r
+ \n## Update channel. Possible values: stable, long-term, testing, developm\\r
+ ent\r\\r
+ \n:global updateChannel \"stable\";\r\\r
\n\r\\r
- \n#:global Updates;\r\\r
- \n#:do {:set Updates [[ :parse \"/system/package/update/get\" ]]} on-error\\r
- ={}\r\\r
+ \n:global CertRenewUrl (\$GlobalScriptsUrl . \"certs/\" . \$Identity . \"/\\r
+ \");\r\\r
+ \n:global CertRenewTime 2w;\r\\r
+ \n:global CertRenewPass (a); #{\r\\r
+ \n# \"\";\r\\r
+ \n# \"v3ry-s3cr3t\";\r\\r
+ \n# \"4n0th3r-s3cr3t\";\r\\r
+ \n#};\r\\r
+ \n:global CertWarnTime 1w;\r\\r
+ \n:global CertIssuedExportPass (a); # {\r\\r
+ \n# \"\";\r\\r
+ \n# \"cert1-cn\"=\"v3ry-s3cr3t\";\r\\r
+ \n# \"cert2-cn\"=\"4n0th3r-s3cr3t\";\r\\r
+ \n#};\r\\r
+ \n\r\\r
+ \n# Script BackupAndUpdate mode, possible values: backup,\r\\r
+ \n# updateOnce - Update once as \"osnotify\" and back \"osnotify\" mode (i\\r
+ n terminal run :set OSUpdateMode updateOnce; \$OSUpdateMode;). \r\\r
+ \n# osupdate - Update if available and creates backups before/after update\\r
+ \_(ignores `forceBackup`)\r\\r
+ \n# Set `forceBackup` to true to always create backups, even\\r
+ \_without updates\r\\r
+ \n# osnotify - Set `forceBackup` to always create backups on every run\r\\r
+ \n:global DevInfoIncludeIP true;\r\\r
+ \n:global BackupAndUpdateMode \"osnotify\"\r\\r
\n\r\\r
- \n#:global PkgUpdStatus \"undefined\";\r\\r
- \n#:local Update [/system/package/update/get];\r\\r
- \n#:retry command={:set PkgUpdStatus (\$Update->\"status\")} delay=200ms m\\r
- ax=5 on-error={};\r\\r
+ \n:global forceBackup true;\r\\r
+ \n:global BackupPassword \"Peskar55\";\r\\r
\n\r\\r
- \n#:log warning [\$InspectVar \$RouterBoard];\r\\r
- \n#:put [\$InspectVar \$RouterBoard];\r\\r
+ \n# SFTP Backup Variables\r\\r
+ \n:global BackupRandomDelay 0;\r\\r
+ \n:global BackupUploadUrl \"sftp://amster.vados.ru/upload/\";\r\\r
+ \n:global BackupUploadUser \$Identity;\r\\r
+ \n:global BackupUploadPass \"root.mnuc.backuper\";\r\\r
\n\r\\r
- \n#:retry command={/system/package/update check-for-updates without-paging\\r
- \_as-value} delay=300ms max=5 on-error={};\r\\r
+ \n:global BackupSendBinary true;\r\\r
+ \n:global BackupSendExport true;\r\\r
+ \n:global BackupSendGlobalConfig true;\r\\r
+ \n:global BackupSendScripts true;\r\\r
\n\r\\r
- \n#:global arrDeviceInfo ({});\r\\r
- \n#:local arrDeviceInfo ({\"section\":{\"key\":\"\"; \"value\":\"\";};});\\r
- \r\\r
- \n#:set (\$arrDeviceInfo->\"RouterBoard\") [[ :parse \"/system/routerboard\\r
- /get\" ]];\r\\r
- \n#:retry command={:set (\$arrDeviceInfo->\"Updates\") [[ :parse \"/system\\r
- /package/update/get\" ]]} delay=500ms max=5 on-error={:log error (\"Error\\r
- \")};\r\\r
- \n# [:toarray {\"section\"={\"key\"=\"\"; \"value\"=\"\";} }];\r\\r
- \n# [:toarray \"\"];\r\\r
- \n:local arrDeviceInfo ({});\r\\r
- \n\r\\r
- \n:set (\$arrDeviceInfo->\"devUpdates\") {\"channel\"; \"stable\";};\r\\r
- \n#:do {:set (arrDeviceInfo->\"Updates\") [[ :parse \"/system/package/upda\\r
- te/get\" ]]} on-error={:log error (\$error)}\r\\r
- \n\$InspectVar \$arrDeviceInfo;\r\\r
- \n"\r
-add comment="Script for setup routeros script system" \\r
- dont-require-permissions=no name=AM-setup owner=AM-setup policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="#\\r
- !rsc by Vados\r\\r
- \n# RouterOS script: AM-setup\r\\r
- \n# Script comment: Script for setup routeros script system\r\\r
- \n# Copyright (c) 2005-2026 Vados <vados@vados.ru>\r\\r
- \n#\r\\r
- \n#\r\\r
- \n# requires RouterOS, version=7.19\r\\r
- \n# requires device-mode, fetch\r\\r
- \n#\r\\r
- \n# :local ScriptName [ :jobname ];\r\\r
- \n# Additional commands:\r\\r
- \n#\r\\r
- \n# For scripts:\r\\r
- \n#:global NewScript \"script_name\"; \r\\r
- \n#:global GlobalScriptsUrl \"https://ros.vados.ru/\";\r\\r
- \n#/system/script/add name=\$NewScript owner=\$NewScript source=([/tool/fe\\r
- tch check-certificate=yes-without-crl (\$GlobalScriptsUrl . \$ScriptAdd . \\r
- \".rsc\") output=user as-value ]->\"data\");\r\\r
- \n#:global NewScript (a);\r\\r
- \n#:global ScriptInstallUpdate; \$ScriptInstallUpdate;\r\\r
- \n#\r\\r
- \n# For run from terminal:\r\\r
- \n#/system/script/add name=AM-setup owner=AM-Setup source=([/tool/fetch ch\\r
- eck-certificate=yes-without-crl \"https://ros.vados.ru/AM-setup.rsc\" outp\\r
- ut=user as-value ]->\"data\");\r\\r
- \n#\r\\r
+ \n# Remove local file after uploading if no errors\r\\r
+ \n:global BackupRmLocal true;\r\\r
\n\r\\r
- \n:global ScriptUpdatesCRLF \"LF\";\r\\r
- \n#:if (\$ScriptUpdatesCRLF != false) do={\r\\r
- \n# :foreach Script in=[ /system/script/find where source~\"^#!rsc by Vad\\r
- os\" ] do={\r\\r
- \n# if (\$ScriptUpdatesCRLF = true) do={\r\\r
- \n# /system/script/set source=[ :tocrlf [ get \$Script source ] ] \$S\\r
- cript;\r\\r
- \n# } else={\r\\r
- \n# /system/script/set source=[ :tolf [ get \$Script source ] ] \$Scr\\r
- ipt;\r\\r
- \n# }\r\\r
- \n# }\r\\r
- \n#}\r\\r
+ \n# Local Backups Root Directory \r\\r
+ \n:global BackupLocalRoot \"tmpfs\";\r\\r
\n\r\\r
- \n# /import verbose=no \$ScriptName\r\\r
- \n:global SetupScript [ :jobname ];\r\\r
- \n:global RemoveMe;\r\\r
- \n:global RunOnce;\r\\r
- \n:global InitSetup true;\r\\r
- \n:global tmpfs true;\r\\r
+ \n# Encrypt Backup\r\\r
+ \n:global BackupEncrypt true;\r\\r
\n\r\\r
- \n{\r\\r
- \n :local RmMe [:tobool \$1];\r\\r
+ \n# Sensitive information in Backups\r\\r
+ \n:global BackupSens true;\r\\r
\n\r\\r
- \n :global GlobalScriptsUrl;\r\\r
- \n :global SetupScript;\r\\r
- \n :global RemoveMe;\r\\r
- \n :global InitSetup;\r\\r
- \n :global tmpfs;\r\\r
- \n \r\\r
- \n :local CertCommonName \"Root YE\";\r\\r
- \n :local CertFileName \"Root-YE.pem\";\r\\r
- \n :local CertFingerprint \"e14ffcad5b0025731006caa43a121a22d8e9700f4fb9c\\r
- f852f02a708aa5d5666\";\r\\r
- \n\r\\r
- \n :if (\$SetupScript = false) do={\r\\r
- \n :global SetupScript \"AM-setup\";\r\\r
- \n }\r\\r
- \n :if (\$RemoveMe != false) do={\r\\r
- \n :set RemoveMe true;\r\\r
- \n }\r\\r
+ \n# User Export\r\\r
+ \n:global BackupUser true;\r\\r
\n\r\\r
- \n :log warning (\"\\n\\\$GlobalScriptsUrl = \" . \$GlobalScriptsUrl);\r\\r
- \n \r\\r
- \n :local CertSettings [ /certificate/settings/get ];\r\\r
- \n :if (!(((\$CertSettings->\"builtin-trust-anchors\") = \"trusted\" || \\r
- \\\r\\r
- \n (\$CertSettings->\"builtin-trust-store\") ~ \"fetch\" || \\\r\\r
- \n (\$CertSettings->\"builtin-trust-store\") = \"all\") && \\\r\\r
- \n [ :len [ /certificate/builtin/find where common-name=\$CertComm\\r
- onName ] ] > 0)) do={\r\\r
- \n :put \"Importing certificate...\";\r\\r
- \n \r\\r
- \n /tool/fetch (\$GlobalScriptsUrl . \"certs/\" . \$CertFileName) dst-p\\r
- ath=\$CertFileName as-value;\r\\r
- \n :delay 1s;\r\\r
- \n /certificate/import file-name=\$CertFileName passphrase=\"\";\r\\r
- \n :if ([ :len [ /certificate/find where fingerprint=\$CertFingerprint \\r
- ] ] != 1) do={\r\\r
- \n :error \"Something is wrong with your certificates!\";\r\\r
- \n };\r\\r
- \n :delay 1s;\r\\r
- \n };\r\\r
+ \n# License Export (not for CHR, will silently skip)\r\\r
+ \n:global BackupLicense false;\r\\r
\n\r\\r
- \n:local MkTmpfs do={\r\\r
- \n :local TmpFs [ /disk/find where slot=tmpfs type=tmpfs ];\r\\r
- \n :if ([ :len \$TmpFs ] = 1) do={\r\\r
- \n :if ([ /disk/get \$TmpFs disabled ] = true) do={\r\\r
- \n :log info (\"The tmpfs is disabled, enabling.\");\r\\r
- \n /disk/enable \$TmpFs;\r\\r
- \n }\r\\r
- \n :return true;\r\\r
- \n }\r\\r
- \n :log info (\"Try to removing directory 'tmpfs'.\");\r\\r
- \n :do {\r\\r
- \n :retry {\r\\r
- \n /file/remove tmpfs;\r\\r
- \n :return true;\r\\r
- \n } delay=100ms max=10;\r\\r
- \n } on-error={ }\r\\r
- \n# \$RmDir \"tmpfs\";\r\\r
- \n :onerror Err {\r\\r
- \n /disk/add slot=tmpfs type=tmpfs tmpfs-max-size=([ /system/resource/g\\r
- et total-memory ] / 3);\r\\r
- \n :do {\r\\r
- \n :retry {\r\\r
- \n /file/get tmpfs;\r\\r
- \n :return true;\r\\r
- \n } delay=222ms max=10;\r\\r
- \n } on-error={ }\r\\r
- \n } do={\r\\r
- \n :log warning (\"Creating disk of type tmpfs failed: \" . \$Err);\r\\r
- \n :return false;\r\\r
- \n }\r\\r
- \n# :return true;\r\\r
- \n}\r\\r
- \n:if (\$tmpfs = true) do={\r\\r
- \n :put \"Tmpfs variable is true. Checking for tmpfs/scripts directory...\\r
- \";\r\\r
- \n :if ([/file find name=\"tmpfs/scripts\"] != \"\") do={\r\\r
- \n :log info (\$0 . \"Directory tmpfs/scripts exsist.\");\r\\r
- \n :return \$true;\r\\r
- \n } else={\r\\r
- \n :log warning (\$0 . \"Directory tmpfs/scripts does't exsist.\");\r\\r
- \n :if ([ \$MkTmpfs ] = false) do={\r\\r
- \n :log error (\$0 . \"Directory tmpfs is not created!\");\r\\r
- \n :return false;\r\\r
- \n } else={\r\\r
- \n :onerror Err {\r\\r
- \n /file/add type=\"directory\" name=/tmpfs/scripts;\r\\r
- \n :do {\r\\r
- \n :retry {\r\\r
- \n /file/get /tmpfs/scripts;\r\\r
- \n :return true;\r\\r
- \n } delay=100ms max=10;\r\\r
- \n } on-error={ }\r\\r
- \n } do={\r\\r
- \n :log warning (\$0 . \"Making directory 'scripts' failed: \" . \$\\r
- Err);\r\\r
- \n :return false;\r\\r
- \n }\r\\r
- \n# :return true;\r\\r
- \n# [ /file/get \$FileName ]\r\\r
- \n }\r\\r
- \n# :log error (\$0 . \"Directory tmpfs/scripts does not exsist. Remove\\r
- \_global variable tmpfs!\");\r\\r
- \n# :global tmpfs (a);\r\\r
- \n# return false;\r\\r
- \n }\r\\r
- \n}\r\\r
- \n :put \"Renaming AM-GlobalConfig, if exists...\";\r\\r
- \n :local ConfOldName (\"AM-GlobalConfig-\" . [ /system/clock/get date ] \\r
- . [ /system/clock/get time ] . \".rsc\");\r\\r
- \n /system/script/set name=\$ConfOldName [ find where name=\"AM-GlobalCon\\r
- fig\" ];\r\\r
- \n :foreach Script in={ \"AM-GlobalConfig\"; \"AM-GlobalFunc\" } do={\r\\r
- \n :put \"Installing \$Script...\";\r\\r
- \n /system/script/remove [ find where name=\$Script ];\r\\r
- \n /system/script/add name=\$Script owner=\$Script source=([ /tool/fetc\\r
- h check-certificate=yes-without-crl url=(\$GlobalScriptsUrl . \$Script . \\r
- \".rsc\") output=user as-value ]->\"data\");\r\\r
- \n \r\\r
- \n /system/script run \$Script;\r\\r
- \n :delay 2s;\r\\r
- \n };\r\\r
+ \n# SSH Keys\r\\r
+ \n:global BackupSshKeys true;\r\\r
\n\r\\r
- \n :if ([ :len [ /certificate/find where fingerprint=\$CertFingerprint ] \\r
- ] > 0) do={\r\\r
- \n :put \"Renaming certificate by its common-name...\";\r\\r
- \n :global CertificateNameByCN;\r\\r
- \n \$CertificateNameByCN \$CertFingerprint;\r\\r
- \n };\r\\r
+ \n# Certificate Export\r\\r
+ \n:global BackupCerts true;\r\\r
\n\r\\r
- \n :if (\$RemoveMe = true) do={\r\\r
- \n :put \"Add Scheduler for remove this script...\";\r\\r
- \n :local OnEvent (\":delay 30s;\\n\" . \"/system/script/remove [ find \\r
- where name=\\\"\$SetupScript\\\" ];\\n\" . \\\r\\r
- \n \":delay 2s;\\n\" . \"/system/scheduler/remove [ find where name=\\\\r
- \"_RemoveSetup\\\" ];\\n\" . \\\r\\r
- \n \":delay 2s;\\n\" . \":global RemoveMe (a);\\n\");\r\\r
- \n :local Comment \"_RemoveSetup tmp scheduler for remove setup script.\\r
- \";\r\\r
- \n /system/scheduler/add name=\"_RemoveSetup\" comment=\$Comment start-\\r
- time=startup interval=30s on-event=\$OnEvent;\r\\r
- \n :log warning (\$0 . \"\\nI've done everything, and now I'm tired..\\r
- . I'm leaving.\\nThere will be an error below, this is normal.\");\r\\r
- \n }\r\\r
- \n :delay 1;\r\\r
- \n :put \"Loading configuration and functions...\";\r\\r
- \n :do { \r\\r
- \n :global ScriptInstallUpdate; \$ScriptInstallUpdate;\r\\r
- \n :put \"Normal removing temporary global environment variables.\";\\r
+ \n# Certificate Password\r\\r
+ \n:global BackupCertsPasswd \"\";\r\\r
+ \n\r\\r
+ \n# User-Manager Export\r\\r
+ \n:global BackupUserMan false;\r\\r
+ \n\r\\r
+ \n# The Dude Export\r\\r
+ \n:global BackupDude false;\r\\r
+ \n\r\\r
+ \n# User Files to export, comma-separated string or array of strings\r\\r
+ \n# User Files are not removed on backup\r\\r
+ \n# Any directory paths will be removed (/ -> _) on remote file\r\\r
+ \n# Nonpresent files are silently skipped\r\\r
+ \n:global BackupUserList \"autosupout.rif,autosupout.old.rif\";\r\\r
+ \n\r\\r
+ \n# load functions and any custom scripts\r\\r
+ \n# [ /system/script/find where name=\"global-config-ov\\r
+ erlay\" ], \\\r\\r
+ \n# [ /system/script/find where name~\"^global-config-o\\r
+ verlay\\\\.d/.\" ]\r\\r
+ \n#\r\\r
+ \n#:foreach Script in=([ /system/script/find where name=\"Amster-TGglobalV\\r
+ ars\" ], [ /system/script/find where name=\"Amster-TGglobalFunc\" ]) do={\\r
\r\\r
- \n :global SetupScript (a);\r\\r
- \n :global InitSetup (a);\r\\r
- \n :global RemoveMe (a);\r\\r
- \n } on-error={\r\\r
- \n :local ErrorMsg \"Loading configuration and functions error!\";\r\\r
- \n :log error (\$0 . \$ErrorMsg . :error);\r\\r
- \n :error \$ErrorMsg;\r\\r
- \n }\r\\r
+ \n# :onerror Err {\r\\r
+ \n# /system/script/run \$Script;\r\\r
+ \n# } do={\r\\r
+ \n# :log error (\"Loading configuration from configs and functions\"\\r
+ \_. [ /system/script/get \$Script name ] . \" failed: \" . \$Err);\r\\r
+ \n# }\r\\r
+ \n#}\r\\r
+ \n#:log info \"\\ndevMode = \$devMode\";\r\\r
+ \n#:log info \"\\ndevRunning = \$devRunning\";\r\\r
+ \n:foreach Script in=[ /system/script/find where source~\"^#!rsc by Vados \\r
+ GlobalRUN\\r\?\\n\" ] do={\r\\r
+ \n :onerror Err {\r\\r
+ \n /system/script/run \$Script;\r\\r
+ \n } do={\r\\r
+ \n :log error (\"Run script \" . [ /system/script/get \$Script name \\r
+ ] . \" width marker \\\" GlobalRUN\\\" failed: \" . \$Err);\r\\r
+ \n }\r\\r
\n}\r\\r
- \n"\r
-add dont-require-permissions=no name=fetchCustom owner=vados policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="#\\r
- \r\\r
- \n#root.mnuc.backuper\r\\r
- \n:global GlobalScriptsUrl \"https://ros.vados.ru/\";\r\\r
- \n#/tool/fetch mode=https url=(\$GlobalScriptsUrl . \".bak/mikro_bak_rsa@1\\r
- 0.30.30.81.pub\") dst-path=\"/mikro_bak_rsa@10.30.30.81.pub\";\r\\r
- \n#:local Script AM-GlobalConfig;\r\\r
- \n#/system/script/add name=\$Script owner=\$Script source=([ /tool/fetch c\\r
- heck-certificate=yes-without-crl url=(\$GlobalScriptsUrl . \$Script . \".r\\r
- sc\") output=user as-value ]->\"data\");\r\\r
- \n#/usb1/mikro_bak_rsa.pub\r\\r
- \n:local FetchFile AM-DOHCert.rsc\r\\r
- \n/tool/fetch mode=https url=(\$GlobalScriptsUrl . \$FetchFile) dst-path=(\\r
- \"[usb1]/scripts/\" . \$FetchFile);\r\\r
+ \n\r\\r
+ \n# signal we are ready\r\\r
+ \n:set GlobalConfReady true;\r\\r
+ \n:while (\$GlobalConfReady != true) do={:delay 500ms};\r\\r
\n"\r
add comment="Global functions" dont-require-permissions=no name=AM-GlobalFunc \\r
owner=AM-GlobalFunc policy=\\r
\n:global GlobalFuncReady false;\r\\r
\n\r\\r
\n# Git commit id & info, expected configuration version\r\\r
- \n:global CommitId \"main/366/ab812be1\";\r\\r
+ \n:global CommitId \"main/680/f2c803f5\";\r\\r
\n:global CommitTAG \"unknown\";\r\\r
\n:global CommitInfo \"Autocommit in repo: ros.vados.ru, generated by owne\\r
- r: root, in 08:50:03 01.05.2026.\";\r\\r
+ r: root, in 21:20:03 11.06.2026.\";\r\\r
\n\r\\r
\n# The variables are received right here.\r\\r
- \n:global GlobalConfVersion 138;\r\\r
+ \n:global GlobalConfVersion 140;\r\\r
\n\r\\r
\n:global SumsDirAndFileName \"tmp/checksums.json\";\r\\r
\n\r\\r
\n:global BackupAndUpdateMode;\r\\r
\n\r\\r
\n# Single functions, without nested functions.\r\\r
- \n:global GlobalEnvRemove;\r\\r
\n:global MiniDateTimeStamp;\r\\r
+ \n:global MicroDateTimeStamp;\r\\r
\n\r\\r
\n# Include globals \$PrintDebug and \$PrintDebugOverride\r\\r
\n:global LogPrint;\r\\r
\n:global RandomDelay;\r\\r
\n:global GetRandomNumber;\r\\r
\n:global EscapeForRegEx;\r\\r
- \n:global ExitError;\r\\r
\n:global CharacterMultiply;\r\\r
\n:global CharacterReplace;\r\\r
\n:global CleanFilePath;\r\\r
\n:global EitherOr;\r\\r
\n:global FormatLine;\r\\r
\n:global GetRandom20CharAlNum;\r\\r
+ \n:global GetRandom20CharHex;\r\\r
+ \n:global GetRandomNumber;\r\\r
\n:global Grep;\r\\r
\n:global IfThenElse;\r\\r
\n:global MAX;\r\\r
\n:global IsTimeSyncCached;\r\\r
\n:global IsTimeSyncResetNtp;\r\\r
\n\r\\r
- \n:global WaitDNSResolving;\r\\r
- \n:global WaitFullyConnected;\r\\r
- \n:global WaitTimeSync;\r\\r
\n:global MkDir;\r\\r
\n:global RmDir;\r\\r
\n:global RmFile;\r\\r
\n:global GlobalConfMigration;\r\\r
\n:global VersionToNum;\r\\r
\n:global RequiredRouterOS;\r\\r
- \n:global FetchLargeFiles;\r\\r
+ \n:global ExitError;\r\\r
+ \n:global ExitOnError;\r\\r
+ \n\r\\r
+ \n:global FetchHugeFiles;\r\\r
\n:global FetchUserAgentStr;\r\\r
+ \n:global FileExists;\r\\r
\n:global CertificateAvailable;\r\\r
\n:global CertificateDownload;\r\\r
\n:global CertificateNameByCN;\r\\r
\n\r\\r
\n:set IsCheckUpdates do={\r\\r
\n :local isInfo [:tobool \$1];\r\\r
- \n :global LogPrint;\r\\r
\n :global updateChannel;\r\\r
\n :global PkgUpdStatus;\r\\r
\n :global currentUpdateChannel;\r\\r
\n :global ROsVerAvail;\r\\r
\n :global arrDeviceInfo;\r\\r
- \n \$LogPrint debug \$0 (\"\\\$isInfo = \" . \$isInfo); \r\\r
+ \n :log info (\$0 . \" \\\$isInfo = \" . \$isInfo); \r\\r
\n :local CurrentChannel [ /system/package/update/get channel ];\r\\r
\n :if ([ :len \$updateChannel ] > 0 && \$CurrentChannel != \$updateChann\\r
el) do={\r\\r
\n :retry command={/system/package/update set channel=\$updateChannel} \\r
\_delay=300ms max=5 on-error={};\r\\r
- \n \$LogPrint debug \$0 (\"Set updates channel to: \$updateChannel\");\\r
- \r\\r
+ \n :log info (\$0 . \" Set updates channel to: \$updateChannel\");\r\\r
\n }\r\\r
- \n\r\\r
\n :local Update [ /system/package/update/get ];\r\\r
\n :local Channel [ :tostr (\$Update->\"channel\") ];\r\\r
\n :set currentUpdateChannel \$Channel;\r\\r
- \n \$LogPrint debug \$0 (\"Update Channel: \" . \$Channel . \".\");\r\\r
- \n\r\\r
- \n\r\\r
+ \n :log info (\$0 . \" Update Channel: \" . \$Channel . \".\");\r\\r
\n :local StatusPkg \"undefined\";\r\\r
- \n \$LogPrint debug \$0 (\"Checking for updates...\");\r\\r
+ \n :log info (\$0 . \" Checking for updates...\");\r\\r
\n :retry command={:set \$StatusPkg ([/system/package/update/check-for-up\\r
dates without-paging as-value]->\"status\")} \\\r\\r
\n delay=300ms max=5 on-error={};\r\\r
- \n \$LogPrint debug \$0 (\"\\\$StatusPkg = \" . \$StatusPkg);\r\\r
+ \n :log info (\$0 . \" \\\$StatusPkg = \" . \$StatusPkg);\r\\r
\n :if (\$StatusPkg = \"New version is available\") do={ :set PkgUpdStatu\\r
s true; } else={ :set PkgUpdStatus false; }\r\\r
\n :set ROsVerAvail [ :tostr [ /system/package/update/get latest-version \\r
] ];\r\\r
- \n \$LogPrint debug \$0 (\"\\\$PkgUpdStatus = \" . \$PkgUpdStatus);\r\\r
+ \n :log info (\$0 . \" \\\$PkgUpdStatus = \" . \$PkgUpdStatus);\r\\r
\n :if (\$isInfo != false || \$PkgUpdStatus = true) do={\r\\r
- \n \$LogPrint debug \$0 (\"\\\$PkgUpdStatus = \" . \$PkgUpdStatus);\r\\r
+ \n :log info (\$0 . \" \\\$PkgUpdStatus = \" . \$PkgUpdStatus);\r\\r
\n :if ([ :typeof \$arrDeviceInfo ] != \"array\") do={\r\\r
\n :set arrDeviceInfo [:toarray \$arrDeviceInfo];\r\\r
\n }\r\\r
\n :global currentUpdateChannel;\r\\r
\n :global ROsVerAvail;\r\\r
\n :global arrDeviceInfo;\r\\r
- \n\r\\r
\n :local Status \"\";\r\\r
\n :local Update;\r\\r
\n :local WaitCount 0;\r\\r
- \n\r\\r
\n :if ([ \$IsCheckUpdates true ] = false) do={\r\\r
\n :return false;\r\\r
\n }\r\\r
- \n\r\\r
\n :set Status [ :tostr [ /system/package/update/get status ] ];\r\\r
\n :while ((\$Status = \"\" || \$Status = \"finding out latest version...\\r
\") && \$WaitCount < 60) do={\r\\r
\n :set WaitCount (\$WaitCount + 1);\r\\r
\n :set Status [ :tostr [ /system/package/update/get status ] ];\r\\r
\n }\r\\r
- \n\r\\r
\n :set Update [ /system/package/update/get ];\r\\r
\n :set currentUpdateChannel [ :tostr (\$Update->\"channel\") ];\r\\r
\n :set ROsVerAvail [ :tostr (\$Update->\"latest-version\") ];\r\\r
\n :set arrDeviceInfo [:toarray \$arrDeviceInfo];\r\\r
\n }\r\\r
\n :set (\$arrDeviceInfo->\"devUpdates\") \$Update;\r\\r
- \n\r\\r
\n :if (\$Status = \"\" || \$Status = \"finding out latest version...\") \\r
do={\r\\r
\n :return false;\r\\r
\n:set GetArrDeviceInfo do={\r\\r
\n :global LogPrint;\r\\r
\n :global arrDeviceInfo;\r\\r
- \n\r\\r
\n :global devBoardName;\r\\r
\n :global devModel;\r\\r
\n :global devRunning;\r\\r
\n\r\\r
\n:if ([ :typeof \$NotificationFunctions ] != \"array\") do={:set Notifica\\r
tionFunctions ({})}\r\\r
+ \n\r\\r
\n:set GetRandom20CharAlNum do={\r\\r
\n :global EitherOr;\r\\r
\n :return [ :rndstr length=[ \$EitherOr [ :tonum \$1 ] 20 ] from=\"ABCDE\\r
FGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789\" ];\r\\r
\n}\r\\r
\n\r\\r
+ \n:set GetRandom20CharHex do={:global EitherOr; :return [ :rndstr length=[\\r
+ \_\$EitherOr [ :tonum \$1 ] 20 ] from=\"0123456789abcdef\" ]; }\r\\r
+ \n:set GetRandomNumber do={:global EitherOr; :return [ :rndnum from=0 to=[\\r
+ \_\$EitherOr [ :tonum \$1 ] 4294967295 ] ]; }\r\\r
+ \n\r\\r
\n:global checkRunJob;\r\\r
\n:set checkRunJob do={\r\\r
\n :local Script [ :tostr \$1 ];\r\\r
\n :return \$Return;\r\\r
\n}\r\\r
\n\r\\r
- \n# !!! The function is not ready !!!\r\\r
- \n:global FetchHttpInfo do={\r\\r
- \n :local Mac [ :tostr \$1 ];\r\\r
- \n :global CertificateAvailable;\r\\r
- \n :global IsMacLocallyAdministered;\r\\r
- \n :global LogPrint;\r\\r
- \n :local Url \"https://api.macvendors.com/\";\r\\r
- \n :if ([ \$IsMacLocallyAdministered \$Mac ] = true) do={:return \"locall\\r
- y administered\";}\r\\r
- \n :do {\r\\r
- \n :if ([ \$CertificateAvailable \"GTS Root R4\" \"fetch\" ] = false) d\\r
- o={\r\\r
- \n \$LogPrint warning \$0 (\"Downloading required certificate failed.\\r
- \");\r\\r
- \n :error false;\r\\r
- \n }\r\\r
- \n :local Vendor ([ /tool/fetch \r\\r
- \n (\$Url . [ :pick \$Mac 0 8 ]) output=user as-value ]->\"data\");\r\\r
- \n :return \$Vendor;\r\\r
- \n } on-error={\r\\r
- \n :onerror Err {\r\\r
- \n /tool/fetch check-certificate=yes-without-crl (\$Url) output=none \\r
- as-value;\r\\r
- \n \$LogPrint debug \$0 (\"The mac vendor is not known in database.\"\\r
- );\r\\r
- \n } do={ \$LogPrint warning \$0 (\"Failed getting mac vendor: \" . \$E\\r
- rr); }\r\\r
- \n :return \"unknown vendor\";\r\\r
- \n }\r\\r
- \n}\r\\r
- \n\r\\r
\n:set GetPubIp do={\r\\r
\n :global DetectIpAddrDefault;\r\\r
\n :global DetectIpAddrFallback;\r\\r
erity \$Severity ] . \": \" . \$Message)}\r\\r
\n}\r\\r
\n\r\\r
- \n# check and download required certificate\r\\r
\n:set CertificateAvailable do={\r\\r
\n :local CommonName [ :tostr \$1 ];\r\\r
\n :local UseFor [ :tostr \$2 ];\r\\r
\n\r\\r
\n :global CertificateDownload;\r\\r
- \n :global LogPrint;\r\\r
\n :global ParseKeyValueStore;\r\\r
\n\r\\r
\n :if ([ :len \$UseFor ] = 0) do={\r\\r
- \n \$LogPrint warning \$0 (\"The intended use is undefined!\");\r\\r
+ \n :log warning (\$0 . \"The intended use is undefined!\");\r\\r
\n :set UseFor \"undefined\";\r\\r
\n }\r\\r
- \n\r\\r
\n :if ([ /system/resource/get free-hdd-space ] < 8388608 && \\\r\\r
\n [ /certificate/settings/get crl-download ] = true && \\\r\\r
\n [ /certificate/settings/get crl-store ] = \"system\") do={\r\\r
- \n \$LogPrint warning \$0 (\"This system has low free flash space but \\r
- \" . \\\r\\r
+ \n :log warning (\$0 . \"This system has low free flash space but \" . \\r
+ \\\r\\r
\n \"is configured to download certificate CRLs to system!\");\r\\r
\n }\r\\r
- \n\r\\r
\n :if ([ :len \$CommonName ] = 0) do={\r\\r
- \n \$LogPrint warning \$0 (\"No CommonName given!\");\r\\r
+ \n :log warning (\$0 . \"No CommonName given!\");\r\\r
\n :return false;\r\\r
\n }\r\\r
- \n\r\\r
\n :local CertSettings [ /certificate/settings/get ];\r\\r
\n :if (((\$CertSettings->\"builtin-trust-anchors\") = \"trusted\" || \\\\r
\r\\r
\_] ] > 0) do={\r\\r
\n :return true;\r\\r
\n }\r\\r
- \n\r\\r
\n :if ([ :len [ /certificate/find where common-name=\$CommonName ] ] = 0\\r
) do={\r\\r
- \n \$LogPrint info \$0 (\"Certificate with CommonName '\" . \$CommonNam\\r
- e . \"' not available.\");\r\\r
+ \n :log info (\$0 . \"Certificate with CommonName '\" . \$CommonName . \\r
+ \"' not available.\");\r\\r
\n :if ([ \$CertificateDownload \$CommonName ] = false) do={\r\\r
\n :return false;\r\\r
\n }\r\\r
\n }\r\\r
- \n\r\\r
\n :if ([ :len [ /certificate/find where common-name=\$CommonName ] ] > 1\\r
) do={\r\\r
- \n \$LogPrint info \$0 (\"There are \" . \$CertCount . \" Certificates \\r
- with CommonName '\" . \$CommonName . \"'. Should be ok.\");\r\\r
+ \n :log info (\$0 . \"There are \" . \$CertCount . \" Certificates with\\r
+ \_CommonName '\" . \$CommonName . \"'. Should be ok.\");\r\\r
\n :return true;\r\\r
\n }\r\\r
- \n\r\\r
\n :local CertVal [ /certificate/get [ find where common-name=\$CommonNam\\r
e ] ];\r\\r
\n :while ((\$CertVal->\"akid\") != \"\" && (\$CertVal->\"akid\") != (\$C\\r
\_= 0) do={\r\\r
\n :local IssuerCN ([ \$ParseKeyValueStore (\$CertVal->\"issuer\") ]-\\r
>\"CN\");\r\\r
- \n \$LogPrint info \$0 (\"Certificate chain for '\" . \$CommonName . \\r
- \"' is incomplete, missing '\" . \$IssuerCN . \"'.\");\r\\r
+ \n :log info (\$0 . \"Certificate chain for '\" . \$CommonName . \"' \\r
+ is incomplete, missing '\" . \$IssuerCN . \"'.\");\r\\r
\n :if ([ \$CertificateDownload \$IssuerCN ] = false) do={\r\\r
\n :return false;\r\\r
\n }\r\\r
\n :return true;\r\\r
\n}\r\\r
\n\r\\r
- \n# download and import certificate\r\\r
\n:set CertificateDownload do={\r\\r
\n :local CommonName [ :tostr \$1 ];\r\\r
- \n\r\\r
\n :global ScriptUpdatesBaseUrl;\r\\r
\n :global ScriptUpdatesUrlSuffix;\r\\r
- \n\r\\r
\n :global CertificateNameByCN;\r\\r
\n :global CleanName;\r\\r
\n :global FetchUserAgentStr;\r\\r
- \n :global LogPrint;\r\\r
\n :global RmFile;\r\\r
\n :global WaitForFile;\r\\r
\n\r\\r
- \n \$LogPrint info \$0 (\"Downloading and importing certificate with \" .\\r
- \_\\\r\\r
+ \n :log info (\$0 . \"Downloading and importing certificate with \" . \\\\r
+ \r\\r
\n \"CommonName '\" . \$CommonName . \"'.\");\r\\r
\n :local FileName ([ \$CleanName \$CommonName ] . \".pem\");\r\\r
\n :do {\r\\r
- \n /tool/fetch check-certificate=yes-without-crl http-header-field=({ [\\r
- \_\$FetchUserAgentStr \$0 ] }) \\\r\\r
+ \n /tool/fetch check-certificate=yes-without-crl mode=https http-header\\r
+ -field=({ [ \$FetchUserAgentStr \$0 ] }) \\\r\\r
\n (\$ScriptUpdatesBaseUrl . \"certs/\" . \$FileName . \$ScriptUpdate\\r
sUrlSuffix) \\\r\\r
\n dst-path=\$FileName as-value;\r\\r
\n \$WaitForFile \$FileName;\r\\r
\n } on-error={\r\\r
- \n \$LogPrint warning \$0 (\"Failed downloading certificate with Common\\r
- Name '\" . \$CommonName . \\\r\\r
+ \n :log warning (\$0 . \" Failed downloading certificate with CommonNam\\r
+ e '\" . \$CommonName . \\\r\\r
\n \"' from repository! Trying fallback to mkcert.org...\");\r\\r
\n :do {\r\\r
\n :local CertSettings [ /certificate/settings/get ];\r\\r
\r\\r
\n [ :len [ /certificate/builtin/find where common-name=\"ISRG\\r
\_Root X1\" ] ] > 0)) do={\r\\r
- \n \$LogPrint error \$0 (\"Required certificate is not available.\"\\r
- );\r\\r
+ \n :log error (\$0 . \" Required certificate is not available.\");\\r
+ \r\\r
\n :return false;\r\\r
\n }\r\\r
- \n /tool/fetch check-certificate=yes-without-crl http-header-field=({\\r
- \_[ \$FetchUserAgentStr \$0 ] }) \\\r\\r
- \n \"https://mkcert.org/generate/\" http-data=[ :serialize to=json \\r
- ({ \$CommonName }) ] \\\r\\r
- \n dst-path=\$FileName as-value;\r\\r
+ \n /tool/fetch check-certificate=yes-without-crl mode=https http-head\\r
+ er-field=({ [ \$FetchUserAgentStr \$0 ] }) \\\r\\r
+ \n url=\"https://mkcert.org/generate/\" http-data=[ :serialize to=jso\\r
+ n ({ \$CommonName }) ] \\\r\\r
+ \n dst-path=\$FileName as-value;\r\\r
\n \$WaitForFile \$FileName;\r\\r
\n :if ([ /file/get \$FileName size ] = 0) do={\r\\r
\n \$RmFile \$FileName;\r\\r
\n :error false;\r\\r
\n }\r\\r
\n } on-error={\r\\r
- \n \$LogPrint warning \$0 (\"Failed downloading certificate with Comm\\r
- onName '\" . \$CommonName . \"'!\");\r\\r
+ \n :log error (\$0 . \" Failed downloading certificate with CommonNam\\r
+ e '\" . \$CommonName . \"'!\");\r\\r
\n :return false;\r\\r
\n }\r\\r
\n }\r\\r
- \n\r\\r
\n /certificate/import file-name=\$FileName passphrase=\"\" as-value;\r\\r
\n :delay 1s;\r\\r
\n \$RmFile \$FileName;\r\\r
- \n\r\\r
\n :if ([ :len [ /certificate/find where common-name=\$CommonName ] ] = 0\\r
) do={\r\\r
\n /certificate/remove [ find where name~(\"^\" . \$FileName . \"_[0-9]\\r
+\\\$\") ];\r\\r
- \n \$LogPrint warning \$0 (\"Certificate with CommonName '\" . \$Common\\r
- Name . \"' still unavailable!\");\r\\r
+ \n :log warning (\$0 . \" Certificate with CommonName '\" . \$CommonNam\\r
+ e . \"' still unavailable!\");\r\\r
\n :return false;\r\\r
\n }\r\\r
- \n\r\\r
\n :foreach Cert in=[ /certificate/find where name~(\"^\" . \$FileName . \\r
\"_[0-9]+\\\$\") ] do={\r\\r
\n \$CertificateNameByCN [ /certificate/get \$Cert common-name ];\r\\r
\n :return true;\r\\r
\n}\r\\r
\n\r\\r
- \n# name a certificate by its common-name\r\\r
\n:set CertificateNameByCN do={\r\\r
\n :local Match [ :tostr \$1 ];\r\\r
- \n\r\\r
\n :global CleanName;\r\\r
- \n :global LogPrint;\r\\r
- \n\r\\r
\n :local Cert ([ /certificate/find where (common-name=\$Match or fingerp\\r
rint=\$Match or name=\$Match) ]->0);\r\\r
\n :if ([ :len \$Cert ] = 0) do={\r\\r
- \n \$LogPrint warning \$0 (\"No matching certificate found.\");\r\\r
+ \n :log warning (\$0 .\" No matching certificate found.\");\r\\r
\n :return false;\r\\r
\n }\r\\r
\n :local CommonName [ /certificate/get \$Cert common-name ];\r\\r
\n :return \$Return;\r\\r
\n}\r\\r
\n\r\\r
- \n:set FetchUserAgentStr do={\r\\r
- \n :local Caller [ :tostr \$1 ];\r\\r
- \n :global IfThenElse;\r\\r
- \n :local Resource [ /system/resource/get ];\r\\r
- \n :return (\"User-Agent: Mikrotik/\" . \$Resource->\"version\" . \" \" .\\r
- \_\$Resource->\"architecture-name\" . \\\r\\r
- \n \" \" . \$Caller . \"/Fetch (https://amster.vados.ru/; main/3419/3ee\\r
- 19780)\");\r\\r
+ \n:set FileExists do={\r\\r
+ \n :local FileName [ :tostr \$1 ];\r\\r
+ \n :local Type [ :tostr \$2 ];\r\\r
+ \n :global FileGet;\r\\r
+ \n :local FileVal [ \$FileGet \$FileName ];\r\\r
+ \n :if (\$FileVal = false) do={ :return false; }\r\\r
+ \n :if ([ :len (\$FileVal->\"size\") ] = 0) do={ :return false; }\r\\r
+ \n :if ([ :len \$Type ] = 0 || \$FileVal->\"type\" = \$Type) do={ :return\\r
+ \_true; }\r\\r
+ \n :return false;\r\\r
\n}\r\\r
\n\r\\r
\n:set Grep do={\r\\r
\n }\r\\r
\n}\r\\r
\n\r\\r
+ \n:set CleanFilePath do={\r\\r
+ \n :local Path [ :tostr \$1 ];\r\\r
+ \n :global CharacterReplace;\r\\r
+ \n :while (\$Path ~ \"//\") do={ :set \$Path [ \$CharacterReplace \$Path \\r
+ \"//\" \"/\" ]; }\r\\r
+ \n :if ([ :pick \$Path 0 ] = \"/\") do={ :set Path [ :pick \$Path 1 [ :le\\r
+ n \$Path ] ]; }\r\\r
+ \n :if ([ :pick \$Path ([ :len \$Path ] - 1) ] = \"/\") do={ :set Path [ \\r
+ :pick \$Path 0 ([ :len \$Path ] - 1) ]; }\r\\r
+ \n :return \$Path;\r\\r
+ \n}\r\\r
+ \n\r\\r
\n:set CleanName do={\r\\r
\n :local Input [ :tostr \$1 ];\r\\r
\n :local Return \"\";\r\\r
\n :return \$Return;\r\\r
\n}\r\\r
\n\r\\r
- \n:set GetRandomNumber do={\r\\r
- \n :global EitherOr;\r\\r
- \n :return [ :rndnum from=0 to=[ \$EitherOr [ :tonum \$1 ] 4294967295 ] ]\\r
- \r\\r
- \n}\r\\r
- \n\r\\r
\n:set RandomDelay do={\r\\r
\n :local Time [ :tonum \$1 ];\r\\r
\n :local Unit [ :tostr \$2 ];\r\\r
\n }\r\\r
\n}\r\\r
\n\r\\r
+ \n:set ExitOnError do={\r\\r
+ \n :local Name [ :tostr \$1 ];\r\\r
+ \n :local Error [ :tostr \$2 ];\r\\r
+ \n :global IfThenElse;\r\\r
+ \n :log error (\$Name . \" \" . [ \$IfThenElse ([ :pick \$Name 0 1 ] = \"\\r
+ \\\$\") \\\r\\r
+ \n \"Function\" \"Script\" ] . \" '\" . \$Name . \"' exited with erro\\r
+ r\" . \\\r\\r
+ \n [ \$IfThenElse (!(\$Error ~ \"^(|true|false)\\\$\")) (\": \" . \$E\\r
+ rror) \".\" ]);\r\\r
+ \n}\r\\r
+ \n\r\\r
\n:set MiniDateTimeStamp do={\r\\r
+ \n :local mikro [ :tobool \$1 ];\r\\r
\n /system/clock;\r\\r
\n :local vdate [get date];\r\\r
\n :local vtime [get time];\r\\r
\n :local HH [:pick \$vtime 0 2];\r\\r
\n :local mm [:pick \$vtime 3 5];\r\\r
\n :local ss [:pick \$vtime 6 8];\r\\r
- \n :return ([\$yyyy] . [\$MM] . [\$dd] . [\$HH] . [\$mm] . [\$ss]);\r\\r
+ \n :local Return;\r\\r
+ \n :if (\$mikro = true) do={\r\\r
+ \n :set Return ([:pick \$yyyy 2 4] . [:pick \$dd 0 1] . [:pick \$HH 0\\r
+ \_1] . [:pick \$mm 3 4] . [:pick \$ss 6 7]);\r\\r
+ \n } else={\r\\r
+ \n :set Return ([\$yyyy] . [\$MM] . [\$dd] . [\$HH] . [\$mm] . [\$ss]);\\r
+ \r\\r
+ \n }\r\\r
+ \n :return \$Return;\r\\r
\n}\r\\r
\n\r\\r
\n:set WaitForFile do={\r\\r
\n:set FileGet do={\r\\r
\n :local FileName [ :tostr \$1 ];\r\\r
\n :global WaitForFile;\r\\r
- \n :if ([ \$WaitForFile \$FileName 0s ] = false) do={:return false}\r\\r
+ \n :if ([ \$WaitForFile \$FileName 0s ] = false) do={\r\\r
+ \n :return false;\r\\r
+ \n }\r\\r
\n :local FileVal false;\r\\r
- \n :do {:set FileVal [ /file/get \$FileName ];\r\\r
+ \n :do {\r\\r
+ \n :set FileVal [ /file/get \$FileName ];\r\\r
\n } on-error={ }\r\\r
\n :return \$FileVal;\r\\r
\n}\r\\r
\n:set RmDir do={\r\\r
\n :local DirName [ :tostr \$1 ];\r\\r
\n :global FileGet;\r\\r
- \n :global LogPrint;\r\\r
- \n \$LogPrint debug \$0 (\"Removing directory: \". \$DirName);\r\\r
+ \n :log debug (\$0 . \" Removing directory: \". \$DirName);\r\\r
\n :local DirVal [ \$FileGet \$DirName ];\r\\r
- \n :if (\$DirVal = false) do={\$LogPrint debug \$0 (\"... which does not \\r
- exist.\"); :return true};\r\\r
- \n :if (\$DirVal->\"type\" != \"directory\") do={\$LogPrint error \$0 (\"\\r
- Directory '\" . \$DirName . \"' is not a directory.\"); :return false};\r\\r
- \n :onerror Err {/file/remove \$DirName} do={\$LogPrint error \$0 (\"Remo\\r
- ving directory '\" . \$DirName . \"' failed: \" . \$Err); :return false};\\r
- \r\\r
- \n :return true;\r\\r
- \n}\r\\r
- \n\r\\r
- \n:set RmFile do={\r\\r
- \n :local FileName [ :tostr \$1 ];\r\\r
- \n :global FileGet;\r\\r
- \n :global LogPrint;\r\\r
- \n \$LogPrint debug \$0 (\"Removing file: \". \$FileName);\r\\r
+ \n :if (\$DirVal = false) do={\r\\r
+ \n :log debug (\$0 . \" ... which does not exist.\");\r\\r
+ \n :return true;\r\\r
+ \n };\r\\r
+ \n :if (\$DirVal->\"type\" != \"directory\") do={\r\\r
+ \n :log error (\$0 . \" Directory '\" . \$DirName . \"' is not a direct\\r
+ ory.\");\r\\r
+ \n :return false;\r\\r
+ \n };\r\\r
+ \n :onerror Err {\r\\r
+ \n /file/remove \$DirName;\r\\r
+ \n } do={\r\\r
+ \n :log error (\$0 . \" Removing directory '\" . \$DirName . \"' failed\\r
+ : \" . \$Err);\r\\r
+ \n :return false;\r\\r
+ \n };\r\\r
+ \n :return true;\r\\r
+ \n}\r\\r
+ \n\r\\r
+ \n:set RmFile do={\r\\r
+ \n :local FileName [ :tostr \$1 ];\r\\r
+ \n :global FileGet;\r\\r
+ \n :log debug (\$0 . \" Removing file: \". \$FileName);\r\\r
\n :local FileVal [ \$FileGet \$FileName ];\r\\r
- \n :if (\$FileVal = false) do={\$LogPrint debug \$0 (\"... which does not\\r
- \_exist.\"); :return true}\r\\r
+ \n :if (\$FileVal = false) do={\r\\r
+ \n :log debug (\$0 . \" ... which does not exist.\");\r\\r
+ \n :return true;\r\\r
+ \n }\r\\r
\n :if (\$FileVal->\"type\" = \"directory\" || \$FileVal->\"type\" = \"di\\r
sk\") do={\r\\r
- \n \$LogPrint error \$0 (\"File '\" . \$FileName . \"' is not a file.\"\\r
- ); :return false}\r\\r
+ \n :log error (\$0 . \" File '\" . \$FileName . \"' is not a file.\");\\r
+ \r\\r
+ \n :return false;\r\\r
+ \n }\r\\r
\n :onerror Err {\r\\r
\n /file/remove \$FileName;\r\\r
- \n } do={\$LogPrint error \$0 (\"Removing file '\" . \$FileName . \"' fai\\r
- led: \" . \$Err); :return false}\r\\r
+ \n } do={\r\\r
+ \n :log error (\$0 . \" Removing file '\" . \$FileName . \"' failed: \"\\r
+ \_. \$Err); :return false;\r\\r
+ \n }\r\\r
\n :return true;\r\\r
\n}\r\\r
\n\r\\r
\n :global FileGet;\r\\r
\n :global RmDir;\r\\r
\n :global WaitForFile;\r\\r
- \n :global LogPrint;\r\\r
+ \n\r\\r
\n :local MkTmpfs do={\r\\r
\n :global WaitForFile;\r\\r
\n :local TmpFs [ /disk/find where slot=tmpfs type=tmpfs ];\r\\r
\n :if ([ :len \$TmpFs ] = 1) do={\r\\r
\n :if ([ /disk/get \$TmpFs disabled ] = true) do={\r\\r
- \n \$LogPrint info \$0 (\"The tmpfs is disabled, enabling.\");\r\\r
+ \n :log info (\$0 . \" The tmpfs is disabled, enabling.\");\r\\r
\n /disk/enable \$TmpFs;\r\\r
\n }\r\\r
\n :return true;\r\\r
\n }\r\\r
- \n \$LogPrint info \$0 (\"Creating disk of type tmpfs.\");\r\\r
+ \n :log info (\$0 . \" Creating disk of type tmpfs.\");\r\\r
\n \$RmDir \"tmpfs\";\r\\r
\n :onerror Err {\r\\r
\n /disk/add slot=tmpfs type=tmpfs tmpfs-max-size=([ /system/resource\\r
/get total-memory ] / 3);\r\\r
\n \$WaitForFile \"tmpfs\";\r\\r
\n } do={\r\\r
- \n \$LogPrint warning \$0 (\"Creating disk of type tmpfs failed: \" .\\r
- \_\$Err);\r\\r
+ \n :log warning (\$0 . \" Creating disk of type tmpfs failed: \" . \$\\r
+ Err);\r\\r
\n :return false;\r\\r
\n }\r\\r
\n :return true;\r\\r
\n :if (\$Path = \"\") do={\r\\r
\n :return true;\r\\r
\n }\r\\r
- \n \$LogPrint debug \$0 (\"Making directory: \" . \$Path);\r\\r
+ \n :log debug (\$0 . \" Making directory: \" . \$Path);\r\\r
\n :local PathVal [ \$FileGet \$Path ];\r\\r
\n :if (\$PathVal->\"type\" = \"directory\") do={\r\\r
- \n \$LogPrint debug \$0 (\"... which already exists.\");\r\\r
+ \n :log debug (\$0 . \" ... which already exists.\");\r\\r
\n :return true;\r\\r
\n }\r\\r
\n :if ([ :pick \$Path 0 5 ] = \"tmpfs\") do={\r\\r
\n /file/add type=\"directory\" name=\$Path;\r\\r
\n \$WaitForFile \$Path;\r\\r
\n } do={\r\\r
- \n \$LogPrint warning \$0 (\"Making directory '\" . \$Path . \"' failed\\r
- : \" . \$Err);\r\\r
+ \n :log warning (\$0 . \" Making directory '\" . \$Path . \"' failed: \\r
+ \" . \$Err);\r\\r
\n :return false;\r\\r
\n }\r\\r
\n :return true;\r\\r
\n :return (\$Return . \$String);\r\\r
\n}\r\\r
\n\r\\r
- \n:set CleanFilePath do={\r\\r
- \n :local Path [ :tostr \$1 ];\r\\r
- \n :global CharacterReplace;\r\\r
- \n :while (\$Path ~ \"//\") do={:set \$Path [ \$CharacterReplace \$Path \\r
- \"//\" \"/\" ]};\r\\r
- \n :if ([ :pick \$Path 0 ] = \"/\") do={:set Path [ :pick \$Path 1 [ :len\\r
- \_\$Path ] ]};\r\\r
- \n :if ([ :pick \$Path ([ :len \$Path ] - 1) ] = \"/\") do={:set Path [ :\\r
- pick \$Path 0 ([ :len \$Path ] - 1) ]};\r\\r
- \n :return \$Path;\r\\r
- \n}\r\\r
- \n\r\\r
\n:set IfThenElse do={\r\\r
\n :if ([ :tostr \$1 ] = \"true\" || [ :tobool \$1 ] = true) do={:return \\r
\$2};\r\\r
\n :local Required [ :tostr \$2 ];\r\\r
\n :local Warn [ :tostr \$3 ];\r\\r
\n :global IfThenElse;\r\\r
- \n :global LogPrint;\r\\r
\n :global VersionToNum;\r\\r
\n :if (!(\$Required ~ \"^\\\\d+\\\\.\\\\d+((alpha|beta|rc|\\\\.)\\\\d+|)\\r
\\\$\")) do={\r\\r
- \n \$LogPrint error \$0 (\"No valid RouterOS version: \" . \$Required);\\r
- \r\\r
+ \n :log error (\$0 . \" No valid RouterOS version: \" . \$Required);\r\\r
\n :return false;\r\\r
\n }\r\\r
\n :if ([ \$VersionToNum \$Required ] > [ \$VersionToNum [ /system/packag\\r
e/update/get installed-version ] ]) do={\r\\r
\n :if (\$Warn = \"true\") do={\r\\r
- \n \$LogPrint warning \$0 (\"This \" . [ \$IfThenElse ([ :pick \$Call\\r
- er 0 ] = (\"\\\$\")) \"function\" \"script\" ] . \\\r\\r
+ \n :log warning (\$0 . \" This \" . [ \$IfThenElse ([ :pick \$Caller \\r
+ 0 ] = (\"\\\$\")) \"function\" \"script\" ] . \\\r\\r
\n \" '\" . \$Caller . \"' (at least specific functionality) requir\\r
es RouterOS \" . \$Required . \". Please update!\");\r\\r
\n }\r\\r
\n }\r\\r
\n :return true;\r\\r
\n}\r\\r
+ \n\r\\r
+ \n:set ValidateSyntax do={\r\\r
+ \n :local Code [ :tostr \$1 ];\r\\r
+ \n :global LogPrint;\r\\r
+ \n :onerror Err {\r\\r
+ \n [ :parse (\":local Validate do={\\n\" . \$Code . \"\\n}\") ];\r\\r
+ \n } do={\r\\r
+ \n \$LogPrint debug \$0 (\"Valdation failed: \" . \$Err);\r\\r
+ \n :return false;\r\\r
+ \n }\r\\r
+ \n :return true;\r\\r
+ \n}\r\\r
+ \n\r\\r
\n:set VersionToNum do={\r\\r
\n :local Input [ :tostr \$1 ];\r\\r
\n :local Multi 0x1000000;\r\\r
\n }\r\\r
\n :return \$Return;\r\\r
\n}\r\\r
+ \n\r\\r
\n:set ScriptLock do={\r\\r
\n :local Script [ :tostr \$1 ];\r\\r
\n :local WaitMax [ :totime \$2 ];\r\\r
\n :global GetRandom20CharAlNum;\r\\r
\n :global IfThenElse;\r\\r
- \n :global LogPrint;\r\\r
\n :global ScriptLockOrder;\r\\r
\n :if ([ :typeof \$ScriptLockOrder ] = \"nothing\") do={\r\\r
\n :set ScriptLockOrder ({});\r\\r
\n }\r\\r
\n :if ([ :typeof \$WaitMax ] = \"nil\" ) do={:set WaitMax 0s}\r\\r
\n :if ([ :len [ /system/script/find where name=\$Script ] ] = 0) do={\r\\r
- \n \$LogPrint error \$0 (\"A script named '\" . \$Script . \"' does not\\r
- \_exist!\");\r\\r
+ \n :log error (\$0 . \" A script named '\" . \$Script . \"' does not ex\\r
+ ist!\");\r\\r
\n :error false;\r\\r
\n }\r\\r
\n :if ([ \$JobCount \$Script ] = 0) do={\r\\r
\n :error false;\r\\r
\n }\r\\r
\n :if ([ \$TicketCount \$Script ] >= [ \$JobCount \$Script ]) do={\r\\r
- \n \$LogPrint error \$0 (\"More tickets than running scripts '\" . \$Sc\\r
- ript . \"', resetting!\");\r\\r
+ \n :log error (\$0 . \" More tickets than running scripts '\" . \$Scrip\\r
+ t . \"', resetting!\");\r\\r
\n :set (\$ScriptLockOrder->\$Script) ({});\r\\r
\n /system/script/job/remove [ find where script=\$Script ];\r\\r
\n }\r\\r
\_lock\" \"\" ] . \"...\");\r\\r
\n :return false;\r\\r
\n}\r\\r
+ \n\r\\r
\n:set SendNotification do={ :onerror Err {\r\\r
\n :global SendNotification2;\r\\r
\n \$SendNotification2 ({ origin=\$0; subject=\$1; message=\$2; link=\$3;\\r
\_silent=\$4 });\r\\r
\n} do={:global ExitOnError; \$ExitOnError \$0 \$Err}\r\\r
\n}\r\\r
+ \n\r\\r
\n:set SendNotification2 do={\r\\r
\n :local Notification \$1;\r\\r
\n :global NotificationFunctions;\r\\r
ns->\\\"\" . \$FunctionName . \"\\\"\") \$Notification;\r\\r
\n }\r\\r
\n}\r\\r
+ \n\r\\r
\n:set SymbolByUnicodeName do={\r\\r
\n :local Name [ :tostr \$1 ];\r\\r
\n :global EitherOr;\r\\r
- \n :global LogPrint;\r\\r
\n :global SymbolsExtra;\r\\r
\n :local Symbols ({\r\\r
\n \"abacus\"=\"\\F0\\9F\\A7\\AE\";\r\\r
\n \"large-orange-circle-10-31\"=\"\\F0\\9F\\8E\\83\";\r\\r
\n \"large-red-circle-04-01\"=\"\\F0\\9F\\8D\\92\" };\r\\r
\n :if ([ :len (\$Symbols->\$Name) ] = 0) do={\r\\r
- \n \$LogPrint warning \$0 (\"No symbol available for name '\" . \$Name \\r
- . \"'!\");\r\\r
+ \n :log warning (\$0 . \"No symbol available for name '\" . \$Name . \"\\r
+ '!\");\r\\r
\n :return \"\";\r\\r
\n }\r\\r
\n :return ([ \$EitherOr (\$Special->(\$Name . \$Magic)) (\$Symbols->\$Na\\r
me) ] . \"\\EF\\B8\\8F\");\r\\r
\n}\r\\r
+ \n\r\\r
\n:set SymbolForNotification do={\r\\r
\n :global NotificationsWithSymbols;\r\\r
\n :global SymbolByUnicodeName;\r\\r
mbolByUnicodeName \$Symbol ])}\r\\r
\n :return (\$Return . \" \");\r\\r
\n}\r\\r
+ \n\r\\r
\n:set Unix2Dos do={:return [ :tocrlf [ :tostr \$1 ] ]}\r\\r
\n:set UrlEncode do={\r\\r
\n :local Input [ :tostr \$1 ];\r\\r
\n }\r\\r
\n :return \$Return;\r\\r
\n}\r\\r
- \n:set ValidateSyntax do={\r\\r
- \n :local Code [ :tostr \$1 ];\r\\r
- \n :global LogPrint;\r\\r
- \n :onerror Err {\r\\r
- \n [ :parse (\":local Validate do={\\n\" . \$Code . \"\\n}\") ];\r\\r
- \n } do={\r\\r
- \n \$LogPrint debug \$0 (\"Valdation failed: \" . \$Err);\r\\r
- \n :return false;\r\\r
- \n }\r\\r
- \n :return true;\r\\r
- \n}\r\\r
+ \n\r\\r
\n:set IsDNSResolving do={\r\\r
\n :do {:resolve \"api.telegram.org\"} on-error={:return false}\r\\r
\n :return true;\r\\r
\n}\r\\r
+ \n\r\\r
\n:set IsFullyConnected do={\r\\r
\n :global IsDNSResolving;\r\\r
\n :global IsTimeSync;\r\\r
\n :if ([ \$IsTimeSync ] = false) do={:return false};\r\\r
\n :return true;\r\\r
\n}\r\\r
+ \n\r\\r
\n:set IsTimeSync do={\r\\r
\n :global IsTimeSyncCached;\r\\r
\n :global IsTimeSyncResetNtp;\r\\r
\n :return true;\r\\r
\n}\r\\r
\n\r\\r
- \n# read parts of a large file\r\\r
- \n:set FetchLargeFiles do={\r\\r
- \n :local ScriptName [:tostr \$1];\r\\r
- \n :local fetchUrl [:tostr \$2];\r\\r
- \n :local CheckCert [:tostr \$3];\r\\r
- \n :local fetchMode [:tostr \$4];\r\\r
- \n :local fetchMethod [:tostr \$5];\r\\r
- \n :local FetchString \"undefined\";\r\\r
- \n \r\\r
+ \n:set FetchHugeFiles do={\r\\r
+ \n :local ScriptName [ :tostr \$1 ];\r\\r
+ \n :local Url [ :tostr \$2 ];\r\\r
+ \n :local CheckCert [ :tostr \$3 ];\r\\r
+ \n\r\\r
\n :global CleanName;\r\\r
\n :global FetchUserAgentStr;\r\\r
\n :global GetRandom20CharAlNum;\r\\r
\n\r\\r
\n :set CheckCert [ \$IfThenElse (\$CheckCert = \"false\") \"no\" \"yes-w\\r
ithout-crl\" ];\r\\r
- \n #:set fetchMode [ \$IfThenElse (\$fetchMode != \"false\") [:tostr (\"m\\r
- ode=\" . \$fetchMode)] ];\r\\r
- \n #:set fetchMethod [\$IfThenElse (\$fetchMethod != \"false\") [:tostr (\\r
- \"http-method=\\\"\" . \$fetchMethod . \"\\\"\") ]];\r\\r
- \n \r\\r
+ \n\r\\r
\n :local DirName (\"tmpfs/\" . [ \$CleanName \$ScriptName ]);\r\\r
\n :if ([ \$MkDir \$DirName ] = false) do={\r\\r
\n \$LogPrint error \$0 (\"Failed creating directory!\");\r\\r
\n :return false;\r\\r
\n }\r\\r
+ \n\r\\r
\n :local FileName (\$DirName . \"/\" . [ \$CleanName \$0 ] . \"-\" . [ \\r
\$GetRandom20CharAlNum ]);\r\\r
- \n #/tool/fetch check-certificate=\$CheckCert \$Url dst-path=\$FileName h\\r
- ttp-header-field=({ [ \$FetchUserAgentStr \$ScriptName ] }) as-value;\r\\r
- \n #:log warning (\"\\\$fUrl =\" . \$2 . ({[ \$fMode ]}));\r\\r
- \n :onerror Err {\r\\r
- \n :set FetchString (\"/tool/fetch \" . \\\r\\r
- \n [\$IfThenElse ([\$fetchMethod] != \"false\") (\"http-method=\\\"\"\\r
- \_. \$fetchMethod . \"\\\" \")] . \\\r\\r
- \n \"check-certificate=\" . \$CheckCert . \" url=(\\\"\" . \$fetchUrl\\r
- \_. \"\\\") \" . \\\r\\r
- \n [\$IfThenElse ([\$fetchMode] != \"false\") (\"mode=\" . \$fetchMod\\r
- e . \" \")] . \\\r\\r
+ \n :onerror Err {\r\\r
+ \n /tool/fetch check-certificate=\$CheckCert \$Url dst-path=\$FileName \\r
+ \\\r\\r
\n http-header-field=({ [ \$FetchUserAgentStr \$ScriptName ] }) as-va\\r
- lue);\r\\r
- \n :log warning (\"\\\$FetchSring = \" . \$FetchString);\r\\r
- \n :put [\$FetchString];\r\\r
- \n #:put [/tool/fetch \$fetchMode check-certificate=\$CheckCert url=(\$\\r
- fetchUrl) dst-path=(\$FileName) http-header-field=({ [ \$FetchUserAgentStr\\r
- \_\$ScriptName ] }) as-value];\r\\r
+ lue;\r\\r
\n } do={\r\\r
\n :if ([ \$WaitForFile \$FileName 500ms ] = true) do={\r\\r
\n \$RmFile \$FileName;\r\\r
\n }\r\\r
- \n \$LogPrint debug \$0 (\"Failed downloading from \" . \$fetchUrl . \"\\r
- \_- \" . \$Err);\r\\r
+ \n \$LogPrint debug \$0 (\"Failed downloading from \" . \$Url . \" - \"\\r
+ \_. \$Err);\r\\r
\n \$RmDir \$DirName;\r\\r
\n :return false;\r\\r
\n }\r\\r
+ \n\r\\r
\n :if ([ \$WaitForFile \$FileName 5s ] = false) do={\r\\r
- \n \$LogPrint debug \$0 (\"The file downloaded from \" . \$fetchUrl . \\r
- \" did not show up.\");\r\\r
+ \n \$LogPrint debug \$0 (\"The file downloaded from \" . \$Url . \" did\\r
+ \_not show up.\");\r\\r
\n :return false;\r\\r
\n }\r\\r
+ \n\r\\r
\n :local FileSize [ /file/get \$FileName size ];\r\\r
\n :local Return \"\";\r\\r
\n :local VarSize 0;\r\\r
\n :return \$Return;\r\\r
\n}\r\\r
\n\r\\r
+ \n:set FetchUserAgentStr do={\r\\r
+ \n :local Caller [ :tostr \$1 ];\r\\r
+ \n :global GlobalScriptsUrl;\r\\r
+ \n :global CommitBrief;\r\\r
+ \n :global IfThenElse;\r\\r
+ \n :local Resource [ /system/resource/get ];\r\\r
+ \n :return (\"User-Agent: Mikrotik/\" . \$Resource->\"version\" . \" \" .\\r
+ \_\$Resource->\"architecture-name\" . \\\r\\r
+ \n \" \" . \$Caller . \"/Fetch (\" . \$GlobalScriptsUrl . \"; \" . [ \$\\r
+ CommitBrief ] . \")\");\r\\r
+ \n}\r\\r
+ \n\r\\r
\n:set ScriptInstallUpdate do={ :onerror Err {\r\\r
\n :local Scripts [ :toarray \$1 ];\r\\r
\n :local NewComment [ :tostr \$2 ];\r\\r
\n [ \$SymbolForNotification \"pushpin\" \"*\" ] . \$Change);\r\\r
\n \$LogPrint info \$0 (\"Change \" . \$I . \": \" . \$Change);\r\\r
\n }\r\\r
- \n } else={:set NotificationMessage (\$NotificationMessage . \"\\n\\nNe\\r
- ws and changes are not available.\")}\r\\r
+ \n } else={\r\\r
+ \n :set NotificationMessage (\$NotificationMessage . \"\\n\\nNews and\\r
+ \_changes are not available.\");\r\\r
+ \n\r\\r
+ \n }\r\\r
\n\r\\r
- \n :set GlobalConfChanges;\r\\r
- \n :set GlobalConfMigration;\r\\r
+ \n :if ([ :len \$GlobalConfChanges ] > 0) do={ :set GlobalConfChanges; \\r
+ } else={ :global GlobalConfChanges (a); }\r\\r
+ \n :if ([ :len \$GlobalConfMigration ] > 0) do={ :set GlobalConfMigrati\\r
+ on; } else={ :global GlobalConfMigration (a); }\r\\r
\n }\r\\r
- \n} do={:global ExitOnError; \$ExitOnError \$0 \$Err}\r\\r
- \n}\r\\r
+ \n} do={\r\\r
+ \n :global ExitOnError; \$ExitOnError \$0 \$Err;\r\\r
+ \n} }\r\\r
\n\r\\r
- \n# Global Environment clear. Use: \"\$GlobalEnvRemove True;\".\r\\r
- \n:set GlobalEnvRemove do={\r\\r
- \n :local doRmEnv [ :tostr \$1 ];\r\\r
- \n :global GlobalScriptsUrl;\r\\r
- \n :local ScriptsUrl;\r\\r
- \n :global LogPrint;\r\\r
- \n :if (\$doRmEnv != \"True\") do={\r\\r
- \n \$LogPrint error \"GlobalEnvRemove\" (\"This script is needed \\\"T\\r
- rue\\\" for confirm to remove global environment variables!\");\r\\r
- \n :return [];\r\\r
- \n :error true; \r\\r
+ \n# load modules\r\\r
+ \n:foreach Script in=[ /system/script/find where name ~ \"^(global-functio\\r
+ ns\\\\.d|mod)/.\" ] do={\r\\r
+ \n :local ScriptVal [ /system/script/get \$Script ];\r\\r
+ \n :if ([ \$ValidateSyntax (\$ScriptVal->\"source\") ] = true) do={\r\\r
+ \n :onerror Err {\r\\r
+ \n /system/script/run \$Script;\r\\r
+ \n } do={\r\\r
+ \n \$LogPrint error \$0 (\"Module '\" . \$ScriptVal->\"name\" . \"' f\\r
+ ailed to run: \" . \$Err);\r\\r
+ \n }\r\\r
\n } else={\r\\r
- \n :set ScriptsUrl \$GlobalScriptsUrl;\r\\r
- \n :delay 5;\r\\r
- \n :foreach var in=[/system/script/environment print as-value] do={/sy\\r
- stem/script/environment remove (\$var->\".id\")}\r\\r
- \n :delay 5;\r\\r
- \n :global GlobalScriptsUrl \$ScriptsUrl;\r\\r
- \n \$LogPrint warning \"GlobalEnvRemove\" (\"Done!\");\r\\r
- \n :return [];\r\\r
- \n :error false;\r\\r
+ \n \$LogPrint error \$0 (\"Module '\" . \$ScriptVal->\"name\" . \"' fai\\r
+ led syntax validation, skipping.\");\r\\r
\n }\r\\r
\n}\r\\r
\n\r\\r
\n:put \"Add or/and fix Global scheduler...\";\r\\r
\n:local OnEvent \"/system/script { run AM-GlobalConfig; run AM-GlobalFunc\\r
; }\";\r\\r
- \n:local Comment \"Setup Global Environment for scripts\";\r\\r
+ \n:local Comment \"Every Day Set Global Environment Variables\";\r\\r
\n:if ([ :len [ /system/scheduler/find where name=\"AM-SetGlobalEnv\" ] ] \\r
= 0) do={\r\\r
\n /system/scheduler/add name=\"AM-SetGlobalEnv\" comment=\$Comment on-ev\\r
start-time=startup interval=1d on-event=\$OnEvent;\r\\r
\n}\r\\r
\n\r\\r
- \n#:local Resource [ /system/resource/get ];\r\\r
- \n#:log info (\$ScriptName . \" Loaded on \" . \$Resource->\"board-name\" \\r
- . \" with RouterOS \" . \$Resource->\"version\" . \" and Architecture \" .\\r
- \".\");\r\\r
- \n\r\\r
\n:onerror Err {\r\\r
\n :global GlobalConfReady;\r\\r
\n :retry { :if (\$GlobalConfReady != true) do={ :error (\"Global configs\\r
\_not ready.\"); }; } delay=100ms max=5;\r\\r
\n\r\\r
- \n# signal we are ready\r\\r
- \n:set GlobalFuncReady true;\r\\r
- \n:set ExitOK true;\r\\r
\n:log warning (\"This script \$ScriptName Loaded \" . \\\r\\r
\n [ \$IfThenElse (\$CommitId != \"unknown\") ([ \$CommitBrief ] . \" \\r
\") ] . \\\r\\r
\n \"on \" . \$devBoardName . \"\\nRouterOS: \" . \$devCurVersion . \"\\r
\\nArchitecture: \" . \$devCurArch . \"\\nIdentity: \" . \$Identity);\r\\r
- \n} do={:global ExitOnError; \$ExitOnError \$0 \$Err;}\r\\r
- \n\r\\r
- \n#} do={:global ExitError; \$ExitError \$ExitOK [ :jobname ] \$Err}\r\\r
- \n# log the successful load of the script, or an error if it failed\r\\r
- \n#:if ([\$GlobalFuncReady] = true && [\$GlobalConfReady] = true) do={\r\\r
- \n"\r
-add comment="Import ssh keys for public key authentication" \\r
- dont-require-permissions=no name=AM-SshKeysImport owner=vados policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="#\\r
- !rsc by Vados\r\\r
- \n# RouterOS script: AM-SshKeysImport\r\\r
- \n# Script comment: Import ssh keys for public key authentication\r\\r
- \n# Copyright (c) 2005-2026 Vados <vados@vados.ru>\r\\r
- \n#\r\\r
- \n# requires RouterOS, version=7.19\r\\r
- \n#\r\\r
- \n:local ExitOK false;\r\\r
- \n:onerror Err {\r\\r
- \n :global GlobalConfReady; :global GlobalFuncReady;\r\\r
- \n :retry { :if (\$GlobalConfReady != true || \$GlobalFuncReady != true) \\r
- \\\r\\r
- \n do={ :error (\"Global configs or functions not ready.\"); }; } del\\r
- ay=500ms max=50;\r\\r
- \n :local ScriptName [ :jobname ];\r\\r
- \n\r\\r
- \n:global SSHKeysImport;\r\\r
- \n:global SSHKeysImportFile;\r\\r
- \n\r\\r
- \n# import single key passed as string\r\\r
- \n:set SSHKeysImport do={ :onerror Err {\r\\r
- \n :local Key [ :tostr \$1 ];\r\\r
- \n :local User [ :tostr \$2 ];\r\\r
- \n :global GetRandom20CharAlNum;\r\\r
- \n :global LogPrint;\r\\r
- \n :global MkDir;\r\\r
- \n :global RmDir;\r\\r
- \n :global WaitForFile;\r\\r
- \n :if ([ :len \$Key ] = 0 || [ :len \$User ] = 0) do={\r\\r
- \n \$LogPrint warning \$0 (\"Missing argument(s), please pass key and u\\r
- ser!\");\r\\r
- \n :return false;\r\\r
- \n }\r\\r
- \n :if ([ :len [ /user/find where name=\$User ] ] = 0) do={\r\\r
- \n \$LogPrint warning \$0 (\"User '\" . \$User . \"' does not exist.\")\\r
- ;\r\\r
- \n :return false;\r\\r
- \n }\r\\r
- \n :local KeyVal ([ :deserialize \$Key delimiter=\" \" from=dsv options=d\\r
- sv.plain ]->0);\r\\r
- \n :if (!(\$KeyVal->0 = \"ssh-ed25519\" || \$KeyVal->0 = \"ssh-rsa\")) do\\r
- ={\r\\r
- \n \$LogPrint warning \$0 (\"SSH key of type '\" . \$KeyVal->0 . \"' is\\r
- \_not supported.\");\r\\r
- \n :return false;\r\\r
- \n }\r\\r
- \n :local FingerPrintMD5 [ :convert from=base64 transform=md5 to=hex (\$K\\r
- eyVal->1) ];\r\\r
- \n :local RegEx (\"\\\\bmd5=\" . \$FingerPrintMD5 . \"\\\\b\");\r\\r
- \n :if ([ :len [ /user/ssh-keys/find where user=\$User \\\r\\r
- \n (key-owner~\$RegEx or info~\$RegEx) ] ] > 0) do={\r\\r
- \n \$LogPrint warning \$0 (\"The ssh public key (MD5:\" . \$FingerPrint\\r
- MD5 . \\\r\\r
- \n \") is already available for user '\" . \$User . \"'.\");\r\\r
- \n :return false;\r\\r
- \n }\r\\r
- \n :if ([ \$MkDir \"tmpfs/ssh-keys-import\" ] = false) do={\r\\r
- \n \$LogPrint warning \$0 (\"Creating directory 'tmpfs/ssh-keys-import'\\r
- \_failed!\");\r\\r
- \n :return false;\r\\r
- \n }\r\\r
- \n :local FileName (\"tmpfs/ssh-keys-import/key-\" . [ \$GetRandom20CharA\\r
- lNum 6 ] . \".pub\");\r\\r
- \n /file/add name=\$FileName contents=(\$Key . \", md5=\" . \$FingerPrint\\r
- MD5);\r\\r
- \n \$WaitForFile \$FileName;\r\\r
- \n :onerror Err {\r\\r
- \n /user/ssh-keys/import public-key-file=\$FileName user=\$User;\r\\r
- \n \$LogPrint info \$0 (\"Imported ssh public key (\" . \$KeyVal->2 . \\r
- \", \" . \$KeyVal->0 . \", \" . \\\r\\r
- \n \"MD5:\" . \$FingerPrintMD5 . \") for user '\" . \$User . \"'.\");\\r
- \r\\r
- \n \$RmDir \"tmpfs/ssh-keys-import\";\r\\r
- \n } do={\r\\r
- \n \$LogPrint warning \$0 (\"Failed importing key: \" . \$Err);\r\\r
- \n \$RmDir \"tmpfs/ssh-keys-import\";\r\\r
- \n :return false;\r\\r
- \n }\r\\r
- \n} do={\r\\r
- \n :global ExitOnError; \$ExitOnError \$0 \$Err;\r\\r
- \n} }\r\\r
+ \n # signal we are ready\r\\r
+ \n:set GlobalFuncReady true;\r\\r
+ \n:set ExitOK true;\r\\r
\n\r\\r
- \n# import keys from a file\r\\r
- \n:set SSHKeysImportFile do={ :onerror Err {\r\\r
- \n :local FileName [ :tostr \$1 ];\r\\r
- \n :local User [ :tostr \$2 ];\r\\r
- \n :global EitherOr;\r\\r
- \n :global FileExists;\r\\r
- \n :global LogPrint;\r\\r
- \n :global ParseKeyValueStore;\r\\r
- \n :global SSHKeysImport;\r\\r
- \n :if ([ :len \$FileName ] = 0 || [ :len \$User ] = 0) do={\r\\r
- \n \$LogPrint warning \$0 (\"Missing argument(s), please pass file name\\r
- \_and user!\");\r\\r
- \n :return false;\r\\r
- \n }\r\\r
- \n :if ([ \$FileExists \$FileName ] = false) do={\r\\r
- \n \$LogPrint warning \$0 (\"File '\" . \$FileName . \"' does not exist\\r
- .\");\r\\r
- \n :return false;\r\\r
- \n }\r\\r
- \n :local Keys [ :tolf [ /file/get \$FileName contents ] ];\r\\r
- \n :foreach KeyVal in=[ :deserialize \$Keys delimiter=\" \" from=dsv opti\\r
- ons=dsv.plain ] do={\r\\r
- \n :local Continue false;\r\\r
- \n :if (\$KeyVal->0 = \"ssh-ed25519\" || \$KeyVal->0 = \"ssh-rsa\") do=\\r
- {\r\\r
- \n :if ([ \$SSHKeysImport (\$KeyVal->0 . \" \" . \$KeyVal->1 . \" \" \\r
- . \$KeyVal->2) \$User ] = false) do={\r\\r
- \n \$LogPrint warning \$0 (\"Failed importing key for user '\" . \$\\r
- User . \"'.\");\r\\r
- \n }\r\\r
- \n :set Continue true;\r\\r
- \n }\r\\r
- \n :if (\$Continue = false && \$KeyVal->0 = \"#\") do={\r\\r
- \n :set User [ \$EitherOr ([ \$ParseKeyValueStore (\$KeyVal->1) ]->\"\\r
- user\") \$User ];\r\\r
- \n :set Continue true;\r\\r
- \n }\r\\r
- \n :if (\$Continue = false && [ :len (\$KeyVal->0) ] > 0) do={\r\\r
- \n \$LogPrint warning \$0 (\"SSH key of type '\" . \$KeyVal->0 . \"' \\r
- is not supported.\");\r\\r
- \n }\r\\r
- \n }\r\\r
+ \n:log info (\$0 . \"Global configs ready!\");\r\\r
\n} do={\r\\r
\n :global ExitOnError; \$ExitOnError \$0 \$Err;\r\\r
- \n} }\r\\r
- \n} do={:global ExitError; \$ExitError \$ExitOK [ :jobname ] \$Err}\r\\r
+ \n}\r\\r
\n"\r
-add comment="Enable or disable ip addresses based on bridge port state" \\r
- dont-require-permissions=no name=mod/AM-IPbridge owner=vados policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="#\\r
- !rsc by Vados\r\\r
- \n# RouterOS script: mod/AM-IPbridge\r\\r
- \n# Script comment: Enable or disable ip addresses based on bridge port st\\r
- ate\r\\r
- \n# Copyright (c) 2005-2026 Vados <vados@vados.ru>\r\\r
+add comment=\\r
+ "Lookup IP addresses for RKN list and add them to firewall address-list" \\r
+ dont-require-permissions=no name=AM-RKN-dnsLookup owner=AM-RKN-dnsLookup \\r
+ policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \\r
+ source="#!rsc by Vados\r\\r
+ \n# RouterOS script: AM-RKN-dnsLookup\r\\r
+ \n# Script comment: Lookup IP addresses for RKN list and add them to firew\\r
+ all address-list\r\\r
+ \n# Copyright (c) 2007-2026 Vados <vados@vados.ru>\r\\r
\n#\r\\r
\n#\r\\r
\n# requires RouterOS, version=7.19\r\\r
\n# requires device-mode, fetch\r\\r
\n#\r\\r
+ \n# Script description: This script is intended to be run periodically, e.\\r
+ g. once a day, to update the IP addresses in the firewall address-list bas\\r
+ ed on the RKN list.\r\\r
+ \n# It resolves the domain names in the RKN list and a\\r
+ dds the corresponding IP addresses to the specified firewall address-list.\\r
+ \r\\r
+ \n# The script also handles CNAME records by following\\r
+ \_them until it finds A records.\r\\r
+ \n# Usage:\r\\r
+ \n# /system/script { run AM-RKN-dnsLookup; }\r\\r
\n:local ScriptName [ :jobname ];\r\\r
\n\r\\r
- \n# Add this Script scheduler\r\\r
- \n:if ([ :len [ /system/scheduler/find where name=\$ScriptName ] ] = 0) do\\r
- ={\r\\r
- \n:log warning (\"SystemScheduler for script: \" . \$ScriptName . \" is NO\\r
- T SET! Fix It Now!\");\r\\r
- \n:local OnEvent \"/system/script/run \$ScriptName;\";\r\\r
- \n:local Comment \"Every Day Check For Fake Bridges\";\r\\r
- \n/system/scheduler/add name=\$ScriptName comment=\$Comment start-time=sta\\r
- rtup interval=1d on-event=\$OnEvent;\r\\r
- \n}\r\\r
- \n\r\\r
- \n:foreach Bridge in=[ /interface/bridge/find ] do={\r\\r
- \n :local BrName [ /interface/bridge/get \$Bridge name ];\r\\r
- \n :if ([ :len [ /interface/bridge/port/find where bridge=\$BrName ] ] > \\r
- 0) do={\r\\r
- \n :if ([ :len [ /interface/bridge/port/find where bridge=\$BrName and \\r
- inactive=no ] ] = 0) do={\r\\r
- \n /ip/address/disable [ find where !dynamic interface=\$BrName ];\r\\r
- \n } else={\r\\r
- \n /ip/address/enable [ find where !dynamic interface=\$BrName ];\r\\r
- \n }\r\\r
- \n }\r\\r
- \n}\r\\r
- \n"\r
-add comment="Check for certificates validity" dont-require-permissions=no \\r
- name=AM-CheckCerts owner=vados policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="#\\r
- !rsc by Vados\r\\r
- \n# RouterOS script: AM-CheckCerts\r\\r
- \n# Script comment: Check for certificates validity\r\\r
- \n# Copyright (c) 2005-2026 Vados <vados@vados.ru>\r\\r
- \n#\r\\r
- \n#\r\\r
- \n# requires RouterOS, version=7.19\r\\r
- \n# requires device-mode, fetch\r\\r
- \n\r\\r
- \n:local ExitOK false;\r\\r
- \n:onerror Err {\r\\r
- \n :global GlobalConfReady; :global GlobalFuncReady;\r\\r
- \n :retry { :if (\$GlobalConfReady != true || \$GlobalFuncReady != true) \\r
- \\\r\\r
- \n do={ :error (\"Global config and/or functions not ready.\"); }; } \\r
- delay=500ms max=50;\r\\r
- \n :local ScriptName [ :jobname ];\r\\r
- \n\r\\r
- \n :global CertRenewTime;\r\\r
- \n :global CertRenewUrl;\r\\r
- \n :global CertWarnTime;\r\\r
- \n :global Identity;\r\\r
- \n\r\\r
- \n :global CertificateAvailable;\r\\r
- \n :global EscapeForRegEx;\r\\r
- \n :global IfThenElse;\r\\r
- \n :global LogPrint;\r\\r
- \n :global ParseKeyValueStore;\r\\r
- \n :global ScriptLock;\r\\r
- \n :global SendNotification2;\r\\r
- \n :global SymbolForNotification;\r\\r
- \n :global UrlEncode;\r\\r
- \n# :global WaitFullyConnected;\r\\r
- \n\r\\r
- \n# Add this Script scheduler\r\\r
- \n:if ([ :len [ /system/scheduler/find where name=\$ScriptName ] ] = 0) do\\r
+ \n:global dnsLookupReady false;\r\\r
+ \n:if ([:typeof \$dnsLookupReady] != \"boolean\") do={ :set dnsLookupReady\\r
+ \_true; }\r\\r
+ \nwhile (!\$dnsLookupReady) do={ :nothing; }\r\\r
+ \n:set dnsLookupReady false;\r\\r
+ \n\r\\r
+ \n:local arrRKN {\r\\r
+ \n \"telegra.ph\"\r\\r
+ \n \"grani.ru\"\r\\r
+ \n \"xhamster.com\"\r\\r
+ \n \"lostfilm.tv\"\r\\r
+ \n \"rutracker.org\"\r\\r
+ \n \"lurkmore.to\"\r\\r
+ \n \"dou.ua\"\r\\r
+ \n \"youporn.com\"\r\\r
+ \n \"pornolab.net\"\r\\r
+ \n \"crimerussia.com\"\r\\r
+ \n \"telegram.org\"\r\\r
+ \n \"api.telegram.org\"\r\\r
+ \n \"facebook.com\"\r\\r
+ \n \"instagram.com\"\r\\r
+ \n \"x.com\"\r\\r
+ \n \"twitter.com\"\r\\r
+ \n \"youtube.com\"\r\\r
+ \n \"googleapis.com\"\r\\r
+ \n \"youtu.be\"\r\\r
+ \n \"googlevideo.com\"\r\\r
+ \n \"gstatic.com\"\r\\r
+ \n \"googleusercontent.com\"\r\\r
+ \n \"nhacmp3youtube.com\"\r\\r
+ \n \"telegram.me\"\r\\r
+ \n \"t.me\";}\r\\r
+ \n\r\\r
+ \n:local ListRKN \"RKN-dnsLookup\";\r\\r
+ \n:local ListComment (\"ListRKN managed by \" . \$ScriptName);\r\\r
+ \n:foreach aListItem in=[/ip/firewall/address-list find list=\$ListRKN] do\\r
={\r\\r
- \n:log warning (\"System Scheduler for script: \" . \$ScriptName . \" is N\\r
- OT SET! Fix It Now!\");\r\\r
- \n:local OnEvent \"/system/script/run \$ScriptName;\";\r\\r
- \n:local Comment \"Every Day Check For Renew Certificates\";\r\\r
- \n/system/scheduler/add name=\$ScriptName comment=\$Comment start-time=sta\\r
- rtup interval=1d on-event=\$OnEvent;\r\\r
- \n}\r\\r
- \n\r\\r
- \n\r\\r
- \n :local CheckCertificatesDownloadImport do={\r\\r
- \n :local ScriptName [ :tostr \$1 ];\r\\r
- \n :local CertName [ :tostr \$2 ];\r\\r
- \n :local FetchName [ :tostr \$3 ];\r\\r
- \n\r\\r
- \n :global CertRenewUrl;\r\\r
- \n :global CertRenewPass;\r\\r
- \n\r\\r
- \n :global CertificateNameByCN;\r\\r
- \n :global EscapeForRegEx;\r\\r
- \n :global FetchUserAgentStr;\r\\r
- \n :global LogPrint;\r\\r
- \n :global RmFile;\r\\r
- \n :global UrlEncode;\r\\r
- \n :global WaitForFile;\r\\r
- \n\r\\r
- \n :foreach Type in={ \"p12\"; \"pem\" } do={\r\\r
- \n :local CertFileName ([ \$UrlEncode \$FetchName ] . \".\" . \$Type)\\r
- ;\r\\r
- \n \$LogPrint debug \$ScriptName (\"Trying type '\" . \$Type . \"' fo\\r
- r '\" . \$CertName . \\\r\\r
- \n \"' (file '\" . \$CertFileName . \"')...\");\r\\r
- \n\r\\r
- \n :do {\r\\r
- \n :onerror Err {\r\\r
- \n /tool/fetch check-certificate=yes-without-crl \\\r\\r
- \n http-header-field=({ [ \$FetchUserAgentStr \$ScriptName ] \\r
- }) \\\r\\r
- \n (\$CertRenewUrl . \$CertFileName) dst-path=\$CertFileName \\r
- as-value;\r\\r
- \n } do={\r\\r
- \n :if (!(\$Err ~ \"[Ss]tatus 404\")) do={\r\\r
- \n \$LogPrint warning \$0 (\"Failed fetching certificate: \" . \\r
- \$Err);\r\\r
- \n }\r\\r
- \n :error false;\r\\r
- \n }\r\\r
- \n \$WaitForFile \$CertFileName; \r\\r
- \n\r\\r
- \n :local DecryptionFailed true;\r\\r
- \n :foreach I,PassPhrase in=\$CertRenewPass do={\r\\r
- \n :do {\r\\r
- \n \$LogPrint debug \$ScriptName (\"Trying \" . \$I . \". passp\\r
- hrase... \");\r\\r
- \n :local Result [ /certificate/import file-name=\$CertFileName\\r
- \_passphrase=\$PassPhrase as-value ];\r\\r
- \n :if (\$Result->\"decryption-failures\" = 0) do={\r\\r
- \n \$LogPrint debug \$ScriptName (\"Success!\");\r\\r
- \n :set DecryptionFailed false;\r\\r
+ \n /ip firewall address-list remove \$aListItem;\r\\r
+ \n}\r\\r
+ \n:foreach aItem in=\$arrRKN do={\r\\r
+ \n# :do {\r\\r
+ \n :retry delay=500ms max=5 on-error={:log error \"dns resolve fail\\r
+ ure [ \$aItem - resolve ip ]\"} command={:resolve \$aItem}\r\\r
+ \n# } on-error={\r\\r
+ \n# :log error \"dns resolve failure [ \$arItem - resolve ip ]\";\r\\r
+ \n# }\r\\r
+ \n :foreach dnsRecord in=[/ip dns cache all find where (name=\$aItem)] \\r
+ do={\r\\r
+ \n :if ([/ip dns cache all get \$dnsRecord type]=\"A\") do={\r\\r
+ \n :local newAddress [/ip dns cache all get \$dnsRecord data];\\r
+ \r\\r
+ \n :do {\r\\r
+ \n /ip firewall address-list add list=\$ListRKN address=\$newA\\r
+ ddress comment=\$aItem;\r\\r
+ \n :log warning \"Successfully adding ip to list A record: \\r
+ \$dnsRecord, address: \$newAddress domain: \$aItem\";\r\\r
+ \n } on-error={\r\\r
+ \n :log error \"error when adding ip to list A record: \$dn\\r
+ sRecord, address: \$newAddress domain: \$aItem\";\r\\r
\n }\r\\r
- \n } on-error={ }\r\\r
- \n }\r\\r
- \n \$RmFile \$CertFileName;\r\\r
- \n\r\\r
- \n :if (\$DecryptionFailed = true) do={\r\\r
- \n \$LogPrint warning \$ScriptName (\"Decryption failed for certi\\r
- ficate file '\" . \$CertFileName . \"'.\");\r\\r
- \n }\r\\r
- \n\r\\r
- \n :foreach CertInChain in=[ /certificate/find where common-name!=\\r
- \$CertName !private-key \\\r\\r
- \n name~(\"^\" . [ \$EscapeForRegEx \$CertFileName ] . \"_[0-9]\\r
- +\\\$\") \\\r\\r
- \n !(subject-alt-name~(\"(^|\\\\W)(DNS|IP):\" . [ \$EscapeForRe\\r
- gEx \$CertName ] . \"(\\\\W|\\\$)\")) \\\r\\r
- \n !(common-name=[]) ] do={\r\\r
- \n \$CertificateNameByCN [ /certificate/get \$CertInChain common-\\r
- name ];\r\\r
- \n }\r\\r
- \n\r\\r
- \n :return true;\r\\r
- \n } on-error={\r\\r
- \n \$LogPrint debug \$ScriptName (\"Could not download certificate \\r
- file '\" . \$CertFileName . \"'.\");\r\\r
- \n }\r\\r
- \n }\r\\r
- \n\r\\r
- \n :return false;\r\\r
- \n }\r\\r
- \n\r\\r
- \n :local FormatInfo do={\r\\r
- \n :local Cert \$1;\r\\r
- \n\r\\r
- \n :global FormatLine;\r\\r
- \n :global FormatMultiLines;\r\\r
- \n :global IfThenElse;\r\\r
- \n\r\\r
- \n :local FormatExpire do={\r\\r
- \n :global CharacterReplace;\r\\r
- \n :return [ \$CharacterReplace [ \$CharacterReplace [ :tostr \$1 ] \\r
- \"w\" \"w \" ] \"d\" \"d \" ];\r\\r
- \n }\r\\r
- \n\r\\r
- \n :local FormatCertChain do={\r\\r
- \n :local Cert \$1;\r\\r
- \n\r\\r
- \n :global ParseKeyValueStore;\r\\r
- \n\r\\r
- \n :local CertVal [ /certificate/get \$Cert ];\r\\r
- \n\r\\r
- \n :if ([ :typeof (\$CertVal->\"issuer\") ] = \"nothing\") do={\r\\r
- \n :return \"self-signed\";\r\\r
- \n }\r\\r
- \n\r\\r
- \n :local Return \"\";\r\\r
- \n :for I from=0 to=5 do={\r\\r
- \n :set Return (\$Return . [ \$ParseKeyValueStore (\$CertVal->\"iss\\r
- uer\") ]->\"CN\");\r\\r
- \n :if ([ :len [ /certificate/builtin/find where skid=(\$CertVal->\\r
- \"akid\") ] ] > 0) do={\r\\r
- \n :return \$Return;\r\\r
- \n }\r\\r
- \n :do {\r\\r
- \n :set CertVal [ /certificate/get [ find where skid=(\$CertVal->\\r
- \"akid\") ] ];\r\\r
- \n } on-error={\r\\r
- \n :return (\$Return . \" (possibly incomplete!)\");\r\\r
\n }\r\\r
- \n :if ((\$CertVal->\"akid\") = \"\" || (\$CertVal->\"akid\") = (\$\\r
- CertVal->\"skid\")) do={\r\\r
- \n :return \$Return;\r\\r
+ \n :if ([/ip dns cache all get \$dnsRecord type]=\"CNAME\") do={\r\\r
+ \n :local cname;\r\\r
+ \n :local nextCname;\r\\r
+ \n :local cnameAddress;\r\\r
+ \n :set cname [/ip dns cache all find where (name=\$aItem && ty\\r
+ pe=\"CNAME\")];\r\\r
+ \n :set nextCname [/ip dns cache all find where (name=[/ip dns \\r
+ cache all get \$cname data] && type=\"CNAME\")];\r\\r
+ \n :while (\$nextCname != \"\") do={\r\\r
+ \n :set cname \$nextCname;\r\\r
+ \n :set nextCname [/ip dns cache all find where (name=[/ip \\r
+ dns cache all get \$cname data] && type=\"CNAME\")];\r\\r
+ \n }\r\\r
+ \n :foreach aRecord in=[/ip dns cache all find where (name=[/ip\\r
+ \_dns cache all get \$cname data] && type=\"A\")] do={\r\\r
+ \n :do {\r\\r
+ \n :set cnameAddress [/ip dns cache all get \$aRecord d\\r
+ ata];\r\\r
+ \n /ip firewall address-list add list=\$ListRKN address\\r
+ =\$cnameAddress comment=\$aItem;\r\\r
+ \n :log warning \"Succesfully adding ip to list CNAME r\\r
+ ecord: \$cname, A record: \$aRecord, address: \$newAddress, from domain: \\r
+ \$aItem.\";\r\\r
+ \n# /ip firewall raw add action=add-dst-to-address-list\\r
+ \_address-list=\$ListRKN address-list-timeout=none-dynamic chain=preroutin\\r
+ g comment=\$aItem content=\$aItem;\r\\r
+ \n } on-error={\r\\r
+ \n :log error \"error when adding ip to list CNAME reco\\r
+ rd: \$cname, A record: \$aRecord, address: \$newAddress, from domain: \$aI\\r
+ tem.\";\r\\r
+ \n }\r\\r
+ \n }\r\\r
\n }\r\\r
- \n :set Return (\$Return . \" -> \");\r\\r
- \n }\r\\r
- \n :return (\$Return . \"...\");\r\\r
\n }\r\\r
+ \n}\r\\r
\n\r\\r
- \n :local CertVal [ /certificate/get \$Cert ];\r\\r
- \n\r\\r
- \n :return ( \\\r\\r
- \n [ \$FormatLine \"Name\" (\$CertVal->\"name\") ] . \"\\n\" . \\\r\\r
- \n [ \$IfThenElse ([ :len (\$CertVal->\"common-name\") ] > 0) ([ \$Fo\\r
- rmatLine \"CommonName\" (\$CertVal->\"common-name\") ] . \"\\n\") ] . \\\r\\r
- \n [ \$IfThenElse ([ :len (\$CertVal->\"subject-alt-name\") ] > 0) ([\\r
- \_\$FormatMultiLines \"SubjectAltNames\" (\$CertVal->\"subject-alt-name\")\\r
- \_] . \"\\n\") ] . \\\r\\r
- \n [ \$FormatLine \"Private key\" [ \$IfThenElse ((\$CertVal->\"priva\\r
- te-key\") = true) \"available\" \"missing\" ] ] . \"\\n\" . \\\r\\r
- \n [ \$FormatLine \"Fingerprint\" (\$CertVal->\"fingerprint\") ] . \"\\r
- \\n\" . \\\r\\r
- \n [ \$IfThenElse ([ :len (\$CertVal->\"ca\") ] > 0) [ \$FormatLine \\r
- \"Issuer\" (\$CertVal->\"ca\") ] [ \$FormatLine \"Issuer chain\" [ \$Forma\\r
- tCertChain \$Cert ] ] ] . \"\\n\" . \\\r\\r
- \n \"Validity:\\n\" . \\\r\\r
- \n [ \$FormatLine \" days\" (\$CertVal->\"days-valid\") ] . \"\\n\\r
- \" . \\\r\\r
- \n [ \$FormatLine \" from\" (\$CertVal->\"invalid-before\") ] . \"\\r
- \\n\" . \\\r\\r
- \n [ \$FormatLine \" to\" (\$CertVal->\"invalid-after\") ] . \"\\n\\r
- \" . \\\r\\r
- \n [ \$FormatLine \" time left\" [ \$IfThenElse ((\$CertVal->\"exp\\r
- ired\") = true) \"expired\" [ \$FormatExpire (\$CertVal->\"expires-after\"\\r
- ) ] ] ]);\r\\r
- \n }\r\\r
- \n\r\\r
- \n :if ([ \$ScriptLock \$ScriptName ] = false) do={\r\\r
- \n :set ExitOK true;\r\\r
- \n :error false;\r\\r
- \n }\r\\r
- \n# \$WaitFullyConnected;\r\\r
- \n\r\\r
- \n :foreach Cert in=[ /certificate/find where !revoked !ca !scep-url expi\\r
- res-after<\$CertRenewTime ] do={\r\\r
- \n :local CertVal [ /certificate/get \$Cert ];\r\\r
- \n :local LastName;\r\\r
- \n :local FetchName;\r\\r
- \n\r\\r
- \n :do {\r\\r
- \n :if ([ :len \$CertRenewUrl ] = 0) do={\r\\r
- \n \$LogPrint info \$ScriptName (\"No CertRenewUrl given.\");\r\\r
- \n :error false;\r\\r
- \n }\r\\r
- \n \$LogPrint info \$ScriptName (\"Attempting to renew certificate '\\r
- \" . (\$CertVal->\"name\") . \"'.\");\r\\r
- \n\r\\r
- \n :local ImportSuccess false;\r\\r
- \n :if ([ :len (\$CertVal->\"common-name\") ] > 0) do={\r\\r
- \n :set LastName (\$CertVal->\"common-name\");\r\\r
- \n :set FetchName \$LastName;\r\\r
- \n :set ImportSuccess [ \$CheckCertificatesDownloadImport \$ScriptN\\r
- ame \$LastName \$FetchName ];\r\\r
- \n }\r\\r
- \n :foreach SAN in=(\$CertVal->\"subject-alt-name\") do={\r\\r
- \n :if (\$ImportSuccess = false) do={\r\\r
- \n :set LastName [ :pick \$SAN ([ :find \$SAN \":\" ] + 1) [ :len\\r
- \_\$SAN ] ];\r\\r
- \n :set FetchName \$LastName;\r\\r
- \n :set ImportSuccess [ \$CheckCertificatesDownloadImport \$Scrip\\r
- tName \$LastName \$FetchName ];\r\\r
- \n :if (\$ImportSuccess = false && [ :pick \$LastName 0 2 ] = \"*\\r
- .\") do={\r\\r
- \n :set FetchName (\"star.\" . [ :pick \$LastName 2 [ :len \$La\\r
- stName ] ]);\r\\r
- \n :set ImportSuccess [ \$CheckCertificatesDownloadImport \$Scr\\r
- iptName \$LastName \$FetchName ];\r\\r
- \n }\r\\r
- \n }\r\\r
- \n }\r\\r
- \n :if (\$ImportSuccess = false) do={ :error false; }\r\\r
- \n\r\\r
- \n :if ([ :len (\$CertVal->\"fingerprint\") ] > 0 && \$CertVal->\"fin\\r
- gerprint\" != [ /certificate/get \$Cert fingerprint ]) do={\r\\r
- \n \$LogPrint debug \$ScriptName (\"Certificate '\" . \$CertVal->\"\\r
- name\" . \"' was updated in place.\");\r\\r
- \n :set CertVal [ /certificate/get \$Cert ];\r\\r
- \n } else={\r\\r
- \n \$LogPrint debug \$ScriptName (\"Certificate '\" . \$CertVal->\"\\r
- name\" . \"' was not updated, but replaced.\");\r\\r
- \n\r\\r
- \n :local CertNew [ /certificate/find where name~(\"^\" . [ \$Escap\\r
- eForRegEx [ \$UrlEncode \$FetchName ] ] . \"\\\\.(p12|pem)_[0-9]+\\\$\") \\r
- \\\r\\r
- \n (common-name=(\$CertVal->\"common-name\") or subject-alt-name~\\r
- (\"(^|\\\\W)(DNS|IP):\" . [ \$EscapeForRegEx \$LastName ] . \"(\\\\W|\\\$)\\r
- \")) \\\r\\r
- \n fingerprint!=[ :tostr (\$CertVal->\"fingerprint\") ] ];\r\\r
- \n :local CertNewVal [ /certificate/get \$CertNew ];\r\\r
- \n\r\\r
- \n :if ((\$CertVal->\"expires-after\") > (\$CertNewVal->\"expires-a\\r
- fter\")) do={\r\\r
- \n /certificate/remove \$CertNew;\r\\r
- \n \$LogPrint warning \$ScriptName (\"Old certificate is newer th\\r
- an the new one. Aborting renew.\");\r\\r
- \n :error false;\r\\r
- \n }\r\\r
- \n\r\\r
- \n :if ((\$CertVal->\"private-key\") = true && (\$CertVal->\"privat\\r
- e-key\") != (\$CertNewVal->\"private-key\")) do={\r\\r
- \n /certificate/remove \$CertNew;\r\\r
- \n \$LogPrint warning \$ScriptName (\"Old certificate '\" . (\$Ce\\r
- rtVal->\"name\") . \"' has a private key, new certificate does not. Aborti\\r
- ng renew.\");\r\\r
- \n :error false;\r\\r
- \n }\r\\r
- \n\r\\r
- \n :if ([ \$CertificateAvailable ([ \$ParseKeyValueStore (\$CertNew\\r
- Val->\"issuer\") ]->\"CN\") \"fetch\" ] = false) do={\r\\r
- \n \$LogPrint warning \$ScriptName (\"The certificate chain is no\\r
- t available!\");\r\\r
- \n }\r\\r
- \n\r\\r
- \n /ip/service/set certificate=(\$CertNewVal->\"name\") [ find wher\\r
- e certificate=(\$CertVal->\"name\") ];\r\\r
- \n\r\\r
- \n /ip/ipsec/identity/set certificate=(\$CertNewVal->\"name\") [ fi\\r
- nd where certificate=(\$CertVal->\"name\") ];\r\\r
- \n /ip/ipsec/identity/set remote-certificate=(\$CertNewVal->\"name\\r
- \") [ find where remote-certificate=(\$CertVal->\"name\") ];\r\\r
- \n\r\\r
- \n /ip/hotspot/profile/set ssl-certificate=(\$CertNewVal->\"name\")\\r
- \_[ find where ssl-certificate=(\$CertVal->\"name\") ];\r\\r
- \n\r\\r
- \n /certificate/remove \$Cert;\r\\r
- \n /certificate/set \$CertNew name=(\$CertVal->\"name\");\r\\r
- \n :set Cert \$CertNew;\r\\r
- \n :set CertVal [ /certificate/get \$CertNew ];\r\\r
- \n }\r\\r
- \n\r\\r
- \n \$SendNotification2 ({ origin=\$ScriptName; silent=true; \\\r\\r
- \n subject=([ \$SymbolForNotification \"lock-with-ink-pen\" ] . \"C\\r
- ertificate renewed: \" . (\$CertVal->\"name\")); \\\r\\r
- \n message=(\"A certificate on \" . \$Identity . \" has been renewe\\r
- d.\\n\\n\" . [ \$FormatInfo \$Cert ]) });\r\\r
- \n \$LogPrint info \$ScriptName (\"The certificate '\" . (\$CertVal->\\r
- \"name\") . \"' has been renewed.\");\r\\r
- \n } on-error={\r\\r
- \n \$LogPrint debug \$ScriptName (\"Could not renew certificate '\" .\\r
- \_(\$CertVal->\"name\") . \"'.\");\r\\r
- \n }\r\\r
- \n }\r\\r
- \n\r\\r
- \n :foreach Cert in=[ /certificate/find where !revoked !scep-url !(expire\\r
- s-after=[]) \\\r\\r
- \n expires-after<\$CertWarnTime !(fingerprint=[]) ] do\\r
+ \n:if ([ :len [ /system/scheduler/find where name=\$ScriptName ] ] = 0) do\\r
={\r\\r
- \n :local CertVal [ /certificate/get \$Cert ];\r\\r
- \n\r\\r
- \n :if ([ :len [ /certificate/scep-server/find where ca-cert=(\$CertVal\\r
- ->\"ca\") ] ] > 0) do={\r\\r
- \n \$LogPrint debug \$ScriptName (\"Certificate '\" . (\$CertVal->\"n\\r
- ame\") . \"' is handled by SCEP, skipping.\");\r\\r
- \n } else={\r\\r
- \n :local State [ \$IfThenElse ((\$CertVal->\"expired\") = true) \"ex\\r
- pired\" \"is about to expire\" ];\r\\r
- \n\r\\r
- \n \$SendNotification2 ({ origin=\$ScriptName; \\\r\\r
- \n subject=([ \$SymbolForNotification \"lock-with-ink-pen,warning-s\\r
- ign\" ] . \"Certificate warning: \" . (\$CertVal->\"name\")); \\\r\\r
- \n message=(\"A certificate on \" . \$Identity . \" \" . \$State . \\r
- \".\\n\\n\" . [ \$FormatInfo \$Cert ]) });\r\\r
- \n \$LogPrint info \$ScriptName (\"The certificate '\" . (\$CertVal->\\r
- \"name\") . \"' \" . \$State . \\\r\\r
- \n \", it is invalid after \" . (\$CertVal->\"invalid-after\") . \\r
- \".\");\r\\r
- \n }\r\\r
- \n }\r\\r
- \n} do={\r\\r
- \n :global ExitError; \$ExitError \$ExitOK [ :jobname ] \$Err;\r\\r
- \n}\r\\r
+ \n :log error (\$ScriptName . \"System Scheduler for script: \" . \$Scri\\r
+ ptName . \" is NOT SET! Fix It Now!\");\r\\r
+ \n /system/scheduler/add name=\$ScriptName on-event=\"/system/script { \\r
+ run \$ScriptName; }\" comment=\"Update RKN DNS Looup\" interval=00:30:00 p\\r
+ olicy=\"ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon\"\\r
+ \_start-time=startup;\r\\r
+ \n }\r\\r
+ \n:set dnsLookupReady true;\r\\r
+ \ndelay 2s; \r\\r
+ \n:global dnsLookupReady (a);\r\\r
\n"\r
-add comment="Global Config Script" dont-require-permissions=no name=\\r
- AM-GlobalConfig owner=vados policy=\\r
+add dont-require-permissions=no name="renameLists " owner=vados policy=\\r
+ ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source=":\\r
+ local oldName \"Test\";\\r
+ \n:local newName \"Test-IP\";\\r
+ \n/ip firewall address-list\\r
+ \n:foreach i in=[find list=\$oldName] do={\\r
+ \nset \$i list=\$newName;\\r
+ \n}\\r
+ \n"\r
+add dont-require-permissions=no name=IPv6-Settings owner=vados policy=\\r
ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="#\\r
- !rsc by Vados\\r
- \n# RouterOS script: AM-GlobalConfig\\r
- \n# Script comment: Global Config Script\\r
- \n# Copyright (c) 2007-2026 Vados <vados@vados.ru>\\r
- \n#\\r
- \n#\\r
- \n# Warning: Dont touch this line!\\r
- \n:global GlobalConfReady false;\\r
- \n#\\r
- \n#\\r
- \n# Global Url For Amster scripts to fetch\\r
- \n# most be defined in AM-Init-Script or AM-setup scripts\\r
- \n:global GlobalScriptsUrl \"https://ros.vados.ru/\";\\r
- \n:global ScriptsUrlSuffix \"\";\\r
- \n:global CheckSumsVerify true;\\r
- \n\\r
- \n:global ScriptUpdatesCRLF true;\\r
- \n:global CommentsInScripts true;\\r
- \n\\r
- \n# Debug output:\\r
- \n:global PrintDebug true; #false;\\r
- \n\\r
- \n# Debug output for specific script:\\r
- \n:set (\$PrintDebugOverride->\"AM-GlobalFunc\") true;\\r
+ #############Script Settings##################\\r
\n\\r
- \n# Debug logs\\r
- \n# Other actions (disk, email, remote or support) can be used as well.\\r
- \n# I do not recommend using echo - use debug output instead (https://rsc.\\r
- eworm.de/main/DEBUG.html#debug-output).\\r
- \n#/system/logging/add topics=script,debug action=memory;\\r
- \n\\r
- \n:global MikrotikUpgradeUrl \"https://upgrade.mikrotik.com/routeros\";\\r
- \n:global Domain \"WORKGROUP\";\\r
- \n\\r
- \n:global EmailGeneralTo \"vados@vados.ru\";\\r
- \n#:global EmailGeneralCc \"\";\\r
- \n\\r
- \n# \$ScriptInstallUpdate mod/notification-telegram\\r
- \n:global TelegramTokenId \"8390868324:AAG3_d1hfVR2M6pGAgDK6ZvhOe4J97nyopw\\r
- \";\\r
- \n:global TelegramChatId \"-1003631309063\"; #\"454403445\";\\r
- \n# Use this to send notifications to a specific topic in group.\\r
- \n#:global TelegramThreadId \"30\";\\r
- \n# Using telegram-chat you have to define trusted chat ids (not group ids\\r
- !)\\r
- \n# or user names. Groups allow to chat with devices simultaneously.\\r
- \n:global TelegramChatIdsTrusted {\\r
- \n \"454403445\"\\r
- \n \"-1003631309063\"\\r
- \n \"-5124482807\"\\r
- \n \"1087968824\";\\r
- \n};\\r
- \n# \"-5294757340\";\\r
- \n\\r
- \n:global TelegramChatGroups \"(all)\";\\r
- \n#:global TelegramChatGroups \"(all|home|office)\";\\r
+ \n:local \"IF-TUN\" \"6to4-tun\"\\r
+ \n:local \"IF-LOC\" \"Bridge-LAN\"\\r
+ \n:local \"POOL-6TO4\" \"poolV6-local\"\\r
+ \n:local \"force-update\" false\\r
+ \n############ use then static ip #######################\\r
+ \n:local \"lease-address\" [/ip address get [find interface=\$\"IF-LOC\"] \\r
+ address]\\r
+ \n#:local \"interface\" \"ext\"\\r
+ \n:local bound 0\\r
\n\\r
- \n:global NotificationFunctions {\\r
- \n \"email\"\\r
- \n \"telegram\";\\r
- \n};\\r
- \n# Toggle this to disable symbols in notifications.\\r
- \n:global NotificationsWithSymbols true;\\r
- \n:global TerminalColorOutput true;\\r
+ \n###############################################\\r
\n\\r
- \n:global DetectIpAddrDefault \"https://ipv4.mikrotik.ovh/\";\\r
- \n:global DetectIpAddrFallback \"https://api.ipify.org/\";\\r
- \n\\r
- \n## Update channel. Possible values: stable, long-term, testing, developm\\r
- ent\\r
- \n:global updateChannel \"stable\";\\r
- \n\\r
- \n:global CertRenewUrl (\$GlobalScriptsUrl . \"certs/\");\\r
- \n:global CertRenewTime 2w;\\r
- \n:global CertRenewPass {\\r
- \n \"\";\\r
- \n# \"v3ry-s3cr3t\";\\r
- \n# \"4n0th3r-s3cr3t\";\\r
- \n};\\r
- \n:global CertWarnTime 1w;\\r
- \n:global CertIssuedExportPass {\\r
- \n \"\";\\r
- \n# \"cert1-cn\"=\"v3ry-s3cr3t\";\\r
- \n# \"cert2-cn\"=\"4n0th3r-s3cr3t\";\\r
- \n};\\r
- \n\\r
- \n# Script BackupAndUpdate mode, possible values: backup,\\r
- \n# updateOnce - Update once as \"osnotify\" and back \"osnotify\" mode (i\\r
- n terminal run :set OSUpdateMode updateOnce; \$OSUpdateMode;). \\r
- \n# osupdate - Update if available and creates backups before/after update\\r
- \_(ignores `forceBackup`)\\r
- \n# Set `forceBackup` to true to always create backups, even\\r
- \_without updates\\r
- \n# osnotify - Set `forceBackup` to always create backups on every run\\r
- \n:global DevInfoIncludeIP true;\\r
- \n:global BackupAndUpdateMode \"osnotify\"\\r
- \n\\r
- \n:global forceBackup true;\\r
- \n:global BackupPassword \"Peskar55\";\\r
- \n\\r
- \n# SFTP Backup Variables\\r
- \n:global BackupRandomDelay 0;\\r
- \n:global BackupUploadUrl \"sftp://amster.vados.ru/upload/\";\\r
- \n:global BackupUploadUser \$Identity;\\r
- \n:global BackupUploadPass \"root.mnuc.backuper\";\\r
- \n\\r
- \n:global BackupSendBinary true;\\r
- \n:global BackupSendExport true;\\r
- \n:global BackupSendGlobalConfig true;\\r
- \n:global BackupSendScripts true;\\r
- \n\\r
- \n# Remove local file after uploading if no errors\\r
- \n:global BackupRmLocal true;\\r
- \n\\r
- \n# Local Backups Root Directory \\r
- \n:global BackupLocalRoot \"tmpfs\";\\r
- \n\\r
- \n# Encrypt Backup\\r
- \n:global BackupEncrypt true;\\r
- \n\\r
- \n# Sensitive information in Backups\\r
- \n:global BackupSens true;\\r
- \n\\r
- \n# User Export\\r
- \n:global BackupUser true;\\r
- \n\\r
- \n# License Export (not for CHR, will silently skip)\\r
- \n:global BackupLicense false;\\r
- \n\\r
- \n# SSH Keys\\r
- \n:global BackupSshKeys true;\\r
- \n\\r
- \n# Certificate Export\\r
- \n:global BackupCerts true;\\r
+ \n:local 6to4prefix do={\\r
+ \n :global dec2hex\\r
+ \n :local ipv4 \$1\\r
+ \n :local ipv6 \"2002:\"\\r
+ \n :for i from=0 to=2 step=1 do={ \\r
+ \n :if ( \$i = 2) do={\\r
+ \n :set ipv6 (\$ipv6.\":\")\\r
+ \n }\\r
+ \n :local fp [:find \$ipv4 \".\"]\\r
+ \n :if ( \$fp > 0 ) do={\\r
+ \n :set ipv6 (\$ipv6.[\$dec2hex [:pick \$ipv4 0 \$fp]])\\r
+ \n :set ipv4 [:pick \$ipv4 (\$fp + 1 ) [:len \$ipv4]]\\r
+ \n }\\r
+ \n }\\r
+ \n :return (\$ipv6.[\$dec2hex \$ipv4])\\r
+ \n}\\r
+ \n:local \"str_replace\" do={\\r
+ \n :local \"str-pos\" [:find \$1 \$2]\\r
+ \n :local \"str-len\" [:len \$2]\\r
+ \n :local str \"\"\\r
+ \n :local rest \$1\\r
+ \n :while (\$\"str-pos\" >= 0) do={\\r
+ \n :local t [:pick \$rest 0 \$\"str-pos\"]\\r
+ \n :if ( \$4 > 0 ) do={\\r
+ \n :for i from=1 to=(\$4 - [:len \$t]) step=1 do={\\r
+ \n :set str (\$str.\$5)\\r
+ \n }\\r
+ \n }\\r
+ \n :set str (\$str.\$t.\$3)\\r
+ \n :set rest [:pick \$rest (\$\"str-pos\"+\$\"str-len\") [:len \$re\\r
+ st]]\\r
+ \n :set \"str-pos\" [:find \$rest \$2]\\r
+ \n }\\r
+ \n :return (\$str.\$rest)\\r
+ \n}\\r
\n\\r
- \n# Certificate Password\\r
- \n:global BackupCertsPasswd \"\";\\r
+ \n:if (\$bound=1) do={\\r
+ \n :local t [:find \$\"lease-address\" \"/\"]\\r
\n\\r
- \n# User-Manager Export\\r
- \n:global BackupUserMan false;\\r
+ \n :if ( \$t >= 0 ) do={\\r
+ \n :set \"lease-address\" [:pick \$\"lease-address\" 0 \$t]\\r
+ \n }\\r
\n\\r
- \n# The Dude Export\\r
- \n:global BackupDude false;\\r
+ \n :if ( [/interface 6to4 print count-only where name=\$\"IF-TUN\"] = 0\\r
+ ) do={\\r
+ \n /interface 6to4 add !keepalive local-address=\$\"lease-address\"\\r
+ \_mtu=1280 name=\$\"IF-TUN\" remote-address=10.30.30.0\\r
+ \n :set \"force-update\" true\\r
+ \n }\\r
\n\\r
- \n# User Files to export, comma-separated string or array of strings\\r
- \n# User Files are not removed on backup\\r
- \n# Any directory paths will be removed (/ -> _) on remote file\\r
- \n# Nonpresent files are silently skipped\\r
- \n:global BackupUserList \"autosupout.rif,autosupout.old.rif\";\\r
+ \n :local \"IPv4-TUN\" [/interface 6to4 get [find name=\$\"IF-TUN\"] lo\\r
+ cal-address];\\r
\n\\r
- \n# load functions and any custom scripts\\r
- \n# [ /system/script/find where name=\"global-config-ov\\r
- erlay\" ], \\\\r
- \n# [ /system/script/find where name~\"^global-config-o\\r
- verlay\\\\.d/.\" ]\\r
- \n#\\r
- \n#:foreach Script in=([ /system/script/find where name=\"Amster-TGglobalV\\r
- ars\" ], [ /system/script/find where name=\"Amster-TGglobalFunc\" ]) do={\\r
- \n# :onerror Err {\\r
- \n# /system/script/run \$Script;\\r
- \n# } do={\\r
- \n# :log error (\"Loading configuration from configs and functions\"\\r
- \_. [ /system/script/get \$Script name ] . \" failed: \" . \$Err);\\r
- \n# }\\r
- \n#}\\r
- \n#:log info \"\\ndevMode = \$devMode\";\\r
- \n#:log info \"\\ndevRunning = \$devRunning\";\\r
- \n:foreach Script in=[ /system/script/find where source~\"^#!rsc by Vados \\r
- GlobalRUN\\r\?\\n\" ] do={\\r
- \n :onerror Err {\\r
- \n /system/script/run \$Script;\\r
- \n } do={\\r
- \n :log error (\"Run script \" . [ /system/script/get \$Script name \\r
- ] . \" width marker \\\" GlobalRUN\\\" failed: \" . \$Err);\\r
- \n }\\r
+ \n :if ( \$\"lease-address\" != \$\"IPv4-TUN\" || \$\"force-update\" = \\r
+ true) do={\\r
+ \n /interface 6to4 set [find name=\$\"IF-TUN\"] local-address=\$\"l\\r
+ ease-address\"\\r
+ \n /ipv6 address remove [find interface=\$\"IF-TUN\"]\\r
+ \n /ipv6 address remove [find interface=\$\"IF-LOC\"]\\r
+ \n /ipv6 route remove [find gateway ~ \$\"IF-TUN\" and dst-address=\\r
+ \"::/0\"]\\r
+ \n :local \"pool-prefix\" [\$6to4prefix \$\"lease-address\"]\\r
+ \n :if ( [/ipv6 pool print count-only where name=\$\"POOL-6TO4\"] =\\r
+ \_0) do={ \\r
+ \n /ipv6 pool add name=\$\"POOL-6TO4\" prefix=(\$\"pool-prefix\\r
+ \".\":1::/64\") prefix-length=64\\r
+ \n } else={\\r
+ \n /ipv6 pool set [/ipv6 pool find where name=\$\"POOL-6TO4\"] \\r
+ prefix=(\$\"pool-prefix\".\":1::/64\")\\r
+ \n }\\r
+ \n /ipv6 address add address=(\$\"pool-prefix\".\"::\".[\$MAC2EUI64\\r
+ \_[/interface get [find name=\$\"interface\"] mac-address]].\"/3\") interf\\r
+ ace=\$\"IF-TUN\" advertise=no\\r
+ \n /ipv6 address add eui-64=yes from-pool=\$\"POOL-6TO4\" interface\\r
+ =\$\"IF-LOC\" advertise=yes\\r
+ \n /ipv6 route add dst-address=::/0 gateway=(\"::10.30.30.81%\".\$\\r
+ \"IF-TUN\")\\r
+ \n :local t [/ipv6 address get [find interface=\$\"IF-LOC\"] addres\\r
+ s]\\r
+ \n :set t [:pick \$t 0 [:find \$t \"/\"]]\\r
+ \n :if ( [/ipv6 dhcp-server option print count-only where name=DNS]\\r
+ \_= 0) do={\\r
+ \n /ipv6 dhcp-server option add code=23 name=DNS value=(\"0x\".\\r
+ [\$\"str_replace\" \$t \":\" \"\" 4 \"0\"])\\r
+ \n } else={\\r
+ \n /ipv6 dhcp-server option set [/ipv6 dhcp-server option find \\r
+ where name=DNS] value=(\"0x\".[\$\"str_replace\" \$t \":\" \"\" 4 \"0\"])\\r
+ \n }\\r
+ \n :if ( [/ipv6 dhcp-server print count-only where interface=\$\"IF\\r
+ -LOC\"] = 0) do={\\r
+ \n /ipv6 dhcp-server add address-pool=\$\"POOL-6TO4\" dhcp-opti\\r
+ on=DNS interface=\$\"IF-LOC\" lease-time=1d name=\$\"IF-LOC\"\\r
+ \n }\\r
+ \n :if ( [ipv6 nd print count-only where interface=\$\"IF-LOC\"] = \\r
+ 0) do={\\r
+ \n /ipv6 nd add advertise-dns=no interface=\$\"IF-LOC\" other-c\\r
+ onfiguration=yes\\r
+ \n }\\r
+ \n }\\r
+ \n}"\r
+add dont-require-permissions=no name=IPv6-GlobalFunc owner=vados policy=\\r
+ ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source=":\\r
+ global MAC2EUI64 do={\\r
+ \n :local EUI64 \"\"\\r
+ \n :local MAC \$1\\r
+ \n :local HEX2DEC \"0123456789ABCDEF\"\\r
+ \n :for i from=0 to=5 step=1 do={\\r
+ \n :if ( \$i = 0 ) do={\\r
+ \n :set EUI64 [:pick \$MAC 0]\\r
+ \n :set EUI64 (\$EUI64.[:tostr [:pick \$\"HEX2DEC\" ([:find \$\\r
+ \"HEX2DEC\" [:pick \$MAC 1]] ^ 2)]])\\r
+ \n }\\r
+ \n :if ( \$i = 1 || \$i = 3) do={\\r
+ \n :set EUI64 (\$EUI64.\":\")\\r
+ \n }\\r
+ \n :if ( \$i = 2 ) do={\\r
+ \n :set EUI64 (\$EUI64.\"FF:FE\")\\r
+ \n }\\r
+ \n :if ( [:find \$MAC \":\"] = 2 ) do={\\r
+ \n :set MAC [:pick \$MAC 3 [:len \$MAC]]\\r
+ \n :set EUI64 (\$EUI64.[:pick \$MAC 0 2])\\r
+ \n }\\r
+ \n }\\r
+ \n :return (\$EUI64)\\r
\n}\\r
\n\\r
- \n# signal we are ready\\r
- \n:set GlobalConfReady true;\\r
- \n:while (\$GlobalConfReady != true) do={:delay 500ms};\\r
- \n"\r
-add comment="Renew locally issued certificates" dont-require-permissions=no \\r
- name=AM-CertsRenew owner=AM-CertsRenew policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="#\\r
- !rsc by Vados\r\\r
- \n# RouterOS script: AM-CertsRenew\r\\r
- \n# Script comment: Renew locally issued certificates\r\\r
- \n# Copyright (c) 2005-2026 Vados <vados@vados.ru>\r\\r
- \n#\r\\r
- \n#\r\\r
- \n# requires RouterOS, version=7.19\r\\r
- \n#\r\\r
- \n:local ExitOK false;\r\\r
- \n:onerror Err {\r\\r
- \n :global GlobalConfReady; :global GlobalFuncReady;\r\\r
- \n :retry { :if (\$GlobalConfReady != true || \$GlobalFuncReady != true) \\r
- \\\r\\r
- \n do={ :error (\"Global config and/or functions not ready.\"); }; } \\r
- delay=500ms max=50;\r\\r
- \n :local ScriptName [ :jobname ];\r\\r
- \n\r\\r
- \n :global CertIssuedExportPass;\r\\r
- \n\r\\r
- \n :global LogPrint;\r\\r
- \n :global MkDir;\r\\r
- \n :global ScriptLock;\r\\r
- \n\r\\r
- \n# Add this Script scheduler\r\\r
- \n:if ([ :len [ /system/scheduler/find where name=\$ScriptName ] ] = 0) do\\r
- ={\r\\r
- \n:log warning (\"System Scheduler for script: \" . \$ScriptName . \" is N\\r
- OT SET! Fix It Now!\");\r\\r
- \n:local OnEvent \"/system/script/run \$ScriptName;\";\r\\r
- \n:local Comment \"Every Day Check For Update Local Issued Certificates.\"\\r
- ;\r\\r
- \n#/system/scheduler/add name=\$ScriptName comment=\$Comment start-time=st\\r
- artup interval=1d on-event=\$OnEvent;\r\\r
- \n}\r\\r
- \n\r\\r
- \n :if ([ \$ScriptLock \$ScriptName ] = false) do={\r\\r
- \n :set ExitOK true;\r\\r
- \n :error false;\r\\r
- \n }\r\\r
- \n\r\\r
- \n :foreach Cert in=[ /certificate/find where issued expires-after<3w ] d\\r
- o={\r\\r
- \n :local CertVal [ /certificate/get \$Cert ];\r\\r
- \n /certificate/issued-revoke \$Cert;\r\\r
- \n /certificate/set name=(\$CertVal->\"name\" . \"-revoked-\" . [ /syst\\r
- em/clock/get date ]) \$Cert;\r\\r
- \n /certificate/add name=(\$CertVal->\"name\") common-name=(\$CertVal->\\r
- \"common-name\") \\\r\\r
- \n key-usage=(\$CertVal->\"key-usage\") subject-alt-name=(\$CertVal\\r
- ->\"subject-alt-name\");\r\\r
- \n /certificate/sign (\$CertVal->\"name\") ca=(\$CertVal->\"ca\");\r\\r
- \n :if ([ :typeof (\$CertIssuedExportPass->(\$CertVal->\"common-name\")\\r
- ) ] = \"str\") do={\r\\r
- \n :if ([ \$MkDir \"cert-issued\" ] = true) do={\r\\r
- \n /certificate/export-certificate (\$CertVal->\"name\") type=pkcs1\\r
- 2 \\\r\\r
- \n file-name=(\"cert-issued/\" . \$CertVal->\"common-name\") \\\\r
- \r\\r
- \n export-passphrase=(\$CertIssuedExportPass->(\$CertVal->\"com\\r
- mon-name\"));\r\\r
- \n \$LogPrint info \$ScriptName (\"Issued a new certificate for '\"\\r
- \_. \$CertVal->\"common-name\" . \\\r\\r
- \n \"', exported to 'cert-issued/\" . \$CertVal->\"common-name\" \\r
- . \".p12'.\");\r\\r
- \n } else={\r\\r
- \n \$LogPrint warning \$ScriptName (\"Failed creating directory, no\\r
- t exporting certificate.\");\r\\r
- \n }\r\\r
- \n } else={\r\\r
- \n \$LogPrint info \$ScriptName (\"Issued a new certificate for '\" .\\r
- \_\$CertVal->\"common-name\" . \"'.\");\r\\r
- \n }\r\\r
- \n }\r\\r
- \n} do={\r\\r
- \n :global ExitError; \$ExitError \$ExitOK [ :jobname ] \$Err;\r\\r
- \n}\r\\r
- \n"\r
-add comment="Update and Backup send notification to EMail" \\r
- dont-require-permissions=no name=AM-Backup-UpdateEmail owner=\\r
- AM-Backup-UpdateEmail policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="#\\r
- !rsc by Vados\r\\r
- \n# RouterOS script: AM-Backup-UpdateEmail\r\\r
- \n# Script comment: Update and Backup send notification to EMail\r\\r
- \n# Copyright (c) 2007-2026 Vados <vados@vados.ru>\r\\r
- \n#\r\\r
- \n#\r\\r
- \n# requires RouterOS, version>=6.43.7\r\\r
- \n# requires device-mode, fetch\r\\r
- \n#\r\\r
- \n# Updated: 15/04/2025\r\\r
- \n# Website: https://github.com/beeyev\r\\r
- \n# Notification e-mail (Make sure you have configured Email settings in T\\r
- ools -> Email)\r\\r
- \n:local ExitOK false;\r\\r
- \n:onerror Err {\r\\r
- \n :global GlobalConfReady; :global GlobalFuncReady;\r\\r
- \n :retry { :if (\$GlobalConfReady != true || \$GlobalFuncReady != true) \\r
- \\\r\\r
- \n do={ :error (\"Global config and/or functions not ready.\"); }; } \\r
- delay=500ms max=50;\r\\r
- \n :local ScriptName [ :jobname ];\r\\r
- \n\r\\r
- \n:local IfThenElse do={:if ([ :tostr \$1 ] = \"true\" || [ :tobool \$1 ] \\r
- = true) do={:return \$2}; :return \$3;}\r\\r
- \n:local EitherOr do={\r\\r
- \n :if ([ :typeof \$1 ] = \"num\") do={:if ((\$1 != 0) = true) do={:retur\\r
- n \$1} else={:return \$2};}\r\\r
- \n :if ([ :typeof \$1 ] = \"time\") do={:if ((\$1 > 0s) = true) do={:retu\\r
- rn \$1} else={:return \$2};}\r\\r
- \n :if ([ :len [ :tostr \$1 ] ] > 0) do={:return \$1} else={:return \$2};\\r
- \r\\r
- \n}\r\\r
- \n:local ExitError do={\r\\r
- \n :local ExitOK [ :tostr \$1 ];\r\\r
- \n :local Name [ :tostr \$2 ];\r\\r
- \n :local Error [ :tostr \$3 ];\r\\r
- \n :if (\$ExitOK = \"false\") do={:log error (\$Name [ \$IfThenElse ([ :p\\r
- ick \$Name 0 1 ] = \"\\\$\") \\\r\\r
- \n \"Function\" \"Script\" ] . \" '\" . \$Name . \"' exited with er\\r
- ror\" . \\\r\\r
- \n [ \$IfThenElse (!(\$Error ~ \"^(|true|false)\\\$\")) (\": \" . \\r
- \$Error) \".\" ]);}\r\\r
- \n}\r\\r
- \n\r\\r
- \n:global LogPrint;\r\\r
- \n:global EditSchedulers;\r\\r
- \n:global DevInfoIncludeIP;\r\\r
- \n\r\\r
- \n:local SchedInterval \"7d\";\r\\r
- \n:local SchedStartTime \"03:41:27\";\r\\r
- \n:local SchedComment \"Every 7 Day Check For Update and Backup send notif\\r
- ication to EMail.\";\r\\r
- \n\r\\r
- \n# Function to add or edit schedulers for scripts, to ensure they are set\\r
- \_up correctly\r\\r
- \n# How to use:\r\\r
- \n# Call this function with the following parameters:\r\\r
- \n# 1. \$1 - Scheduler name (usually same as script name) [*]\r\\r
- \n# 2. \$2 - Interval (e.g. \"1d\" (default is \"1d\")) [**]\r\\r
- \n# 3. \$3 - Start Time (e.g. \"00:00:00\", default is current time) [**]\\r
- \r\\r
- \n# 4. \$4 - Comment (optional, default: \"Scheduler for script: <name>\")\\r
- \_[**]\r\\r
- \n# 5. \$5 - On Event command (e.g. \"/system/script { run <name>; }\" (de\\r
- fault is \"/system/script { run \$SchedName; }\")) [**]\r\\r
- \n# 6. \$6 - Policy (e.g. \"ftp,reboot,read,write,policy,test,password,sni\\r
- ff,sensitive,romon\" (default is the same)) [**]\r\\r
- \n# 7. \$7 - Start Date (e.g. \"jan/01/1970\", default is current date) [*\\r
- *]\r\\r
- \n# Notes:\r\\r
- \n# * - Scheduler name is required, and is used to identify the scheduler\\r
- \_to create or edit. It is usually the same as the script name (\$ScriptNa\\r
- me).\r\\r
- \n# ** - If optional parameters are not provided, default values will be u\\r
- sed.\r\\r
- \n# This allows for quick setup with minimal parameters, while still \\r
- providing flexibility for customization.\r\\r
- \n# Example usage:\r\\r
- \n# :if ([ \$EditSchedulers \"my-script\" ] = false) do={:set ExitOK false\\r
- ; :error true;}\r\\r
- \n# :if ([ \$EditSchedulers \"my-script\" \"1d\" \"03:41:27\" \"My custom \\r
- scheduler comment\" false false \"jan/01/1970\" ] = false) do={:set ExitOK\\r
- \_false; :error true;}\r\\r
- \n\r\\r
- \n:set EditSchedulers do={\r\\r
- \n :local SchedName [ :tostr \$1 ];\r\\r
- \n :if ([ :len \$SchedName ] = 0) do={ :return false; }\r\\r
- \n :local Interval [ :tostr \$2 ];\r\\r
- \n :if ([ :len \$Interval ] = 0) do={ :set Interval \"1d\"; }\r\\r
- \n :local StartTime [ :tostr \$3 ];\r\\r
- \n :if ([ :len \$StartTime ] = 0) do={ :set StartTime [/system/clock/get \\r
- time]; }\r\\r
- \n :local Comment [ :tostr \$4 ];\r\\r
- \n :if ([ :len \$Comment ] = 0) do={ :set Comment \"Scheduler for script:\\r
- \_\$SchedName\"; }\r\\r
- \n :local OnEvent [ :tostr \$5 ];\r\\r
- \n :if ([ :len \$OnEvent ] = 0) do={ :set OnEvent \"/system/script { run \\r
- \$SchedName; }\"; }\r\\r
- \n :local Policy [ :tostr \$6 ];\r\\r
- \n :if ([ :len \$Policy ] = 0) do={ :set Policy \"ftp,reboot,read,write,p\\r
- olicy,test,password,sniff,sensitive,romon\"; }\r\\r
- \n :local StartDate [ :tostr \$7 ];\r\\r
- \n :if ([ :len \$StartDate ] = 0) do={ :set StartDate [/system/clock/get \\r
- date]; }\r\\r
- \n\r\\r
- \n :onerror Err {\r\\r
- \n # Check if scheduler exists, if not - create it\r\\r
- \n :if ([ :len [ /system/scheduler/find where name=\$SchedName ] ] = 0)\\r
- \_do={\r\\r
- \n :log warning (\$SchedName . \"System Scheduler for script: \" . \$\\r
- SchedName . \" is NOT SET! Fix It Now!\");\r\\r
- \n /system/scheduler/add comment=\$Comment interval=\$Interval name=\\r
- \$SchedName on-event=\$OnEvent policy=\$Policy start-date=\$StartDate star\\r
- t-time=\$StartTime;\r\\r
- \n }\r\\r
- \n # Check if scheduler parameters are correct, if not - fix them\r\\r
- \n :if ([ /system/scheduler/get \$SchedName comment ] != \$Comment) do=\\r
- {\r\\r
- \n /system/scheduler/set \$SchedName comment=\$Comment;\r\\r
- \n }\r\\r
- \n :if ([ /system/scheduler/get \$SchedName interval ] != \$Interval) d\\r
- o={\r\\r
- \n /system/scheduler/set \$SchedName interval=\$Interval;\r\\r
- \n }\r\\r
- \n :if ([ /system/scheduler/get \$SchedName on-event ] != \$OnEvent) do\\r
- ={\r\\r
- \n /system/scheduler/set \$SchedName on-event=\$OnEvent;\r\\r
- \n }\r\\r
- \n :if ([ /system/scheduler/get \$SchedName policy ] != \$Policy) do={\\r
- \r\\r
- \n /system/scheduler/set \$SchedName policy=\$Policy;\r\\r
- \n }\r\\r
- \n :if ([ /system/scheduler/get \$SchedName start-date ] != \$StartDate\\r
- ) do={\r\\r
- \n /system/scheduler/set \$SchedName start-date=\$StartDate;\r\\r
- \n }\r\\r
- \n :if ([ /system/scheduler/get \$SchedName start-time ] != \$StartTime\\r
- ) do={\r\\r
- \n /system/scheduler/set \$SchedName start-time=\$StartTime;\r\\r
- \n }\r\\r
- \n } do={:log error (\$SchedName . \"Failed to add/modify scheduler for '\\r
- \" . \$SchedName . \"' failed: \" . \$Err); :return false};\r\\r
- \n :return true;\r\\r
- \n}\r\\r
- \n\r\\r
- \n:if ([ \$EditSchedulers \$ScriptName \$SchedInterval \$SchedStartTime \$\\r
- SchedComment ] = false) do={\r\\r
- \n :log error (\$ScriptName . \"Failed to add/modify scheduler for \" . \\r
- \$ScriptName . \"!\");\r\\r
- \n :set ExitOK true;\r\\r
- \n :error true;\r\\r
- \n}\r\\r
- \n\r\\r
- \n# Local Function CheckOSUpdateMode\r\\r
- \n:local CheckOSUpdateMode;\r\\r
- \n:set CheckOSUpdateMode do={\r\\r
- \n :local NewMode [ :tostr \$1 ];\r\\r
- \n :if ([ :len \$NewMode ] = 0) do={\r\\r
- \n :log error (\$0 . \"/nFunction /\$CheckOSUpdateMode received empty v\\r
- alue!\");\r\\r
- \n :return false;\r\\r
- \n :error true;\r\\r
- \n }\r\\r
- \n\r\\r
- \n :global BackupAndUpdateMode;\r\\r
- \n :global OldMode [ :tostr \$BackupAndUpdateMode ];\r\\r
- \n :if (\$NewMode != \$BackupAndUpdateMode && \$NewMode = \"updateOnce\")\\r
- \_do={\r\\r
- \n :set BackupAndUpdateMode [ :tostr \$NewMode ];\r\\r
- \n :log info (\$0 . \"/nOk. /\$BackupAndUpdateMode set to: '\" . \$NewM\\r
- ode . \"'.\\nYou're a good boy! ))\\nI'm launching the update in 5 seconds\\r
- .\");\r\\r
- \n :delay 5;\r\\r
- \n /system/script { run \$ScriptName; };\r\\r
- \n } else={\r\\r
- \n :log warning (\$0 . \"/nFunction /\$CheckOSUpdateMode received value: \\r
- '\" . \$NewMode . \"', but is may be only \\\"updateOnce\\\"!\");\r\\r
- \n :return false;\r\\r
- \n }\r\\r
- \n :return true;\r\\r
- \n :error false;\r\\r
- \n}\r\\r
- \n\r\\r
- \n# :if ([ :len [ /system/scheduler/find where name=\"running-from-backup\\r
- -partition\" ] ] > 0) do={\r\\r
- \n# \$LogPrint warning \$ScriptName (\"Running from backup partition, r\\r
- efusing to act.\");\r\\r
- \n# :set ExitOK true;\r\\r
- \n# :error false;\r\\r
- \n# }\r\\r
- \n\r\\r
- \n:global EmailGeneralTo;\r\\r
- \n:global BackupAndUpdateMode;\r\\r
- \n:global forceBackup;\r\\r
- \n:global BackupPassword;\r\\r
- \n:global BackupSens;\r\\r
- \n:global updateChannel;\r\\r
- \n\r\\r
- \n:global DevInfoIncludeIP;\r\\r
- \n\r\\r
- \n# Installs patch updates only (BackupAndUpdateMode = \"osupdate\").\r\\r
- \n# Works for `stable` and `long-term` channels.\r\\r
- \n# Updates only if MAJOR.MINOR match (e.g. 6.43.2 > 6.43.6 allowed, 6.44.\\r
- 1 skipped).\r\\r
- \n# Sends info if a newer (non-patch) version is found.\r\\r
- \n:local installOnlyPatchUpdates false;\r\\r
- \n:local scriptVersion \"26.04.30\";\r\\r
- \n:local copyrightUrl \"https://www.github.com/vados-dev/\";\r\\r
- \n#Script messages prefix\r\\r
- \n:local SMP \"BkpAndUpdate:\";\r\\r
- \n\r\\r
- \n:local exitErrorMessage \"\$SMP script stopped due to an error. Please c\\r
- heck logs for more details.\";\r\\r
- \n:log info \"\\n\\n\$SMP Script \\\"Mikrotik RouterOS automatic backup & \\r
- update\\\" v.\$scriptVersion started.\";\r\\r
- \n:log info \"\$SMP Script Mode: `\$BackupAndUpdateMode`, Update channel: \\r
- `\$updateChannel`, Force backup: `\$forceBackup`, Install only patch updat\\r
- es: `\$installOnlyPatchUpdates`\";\r\\r
- \n\r\\r
- \n## vv FUNCTIONS vv ##\r\\r
- \n:global WaitCheckUpdates; \$WaitCheckUpdates;\r\\r
- \n:global MiniDateTimeStamp;\r\\r
- \n:local MDTSFix [\$MiniDateTimeStamp];\r\\r
- \n:global Identity;\r\\r
- \n:global IdentityShort;\r\\r
- \n:global devBoardName;\r\\r
- \n:global runningVersion;\r\\r
- \n:global runningChannel;\r\\r
- \n:global devModel;\r\\r
- \n:global devRbSerialNumber;\r\\r
- \n:global ROsVerAvail;\r\\r
- \n:global PkgUpdStatus;\r\\r
- \n\r\\r
- \n# Checks if two RouterOS version strings differ only by the patch versio\\r
- n\r\\r
- \n# :put [\$FuncIsPatchUpdateOnly \"6.2.1\" \"6.2.4\"] # Output: true\r\\r
- \n# :put [\$FuncIsPatchUpdateOnly \"6.2.1\" \"6.3.1\"] # Output: false\r\\r
- \n:local FuncIsPatchUpdateOnly do={\r\\r
- \n :local ver1 \$1;\r\\r
- \n :local ver2 \$2;\r\\r
- \n # Extract the major and minor components from a version\r\\r
- \n :local extractMajorMinor do={\r\\r
- \n :local ver \$1;\r\\r
- \n :local dot1 [:find \$ver \".\"];\r\\r
- \n :if (\$dot1 = -1) do={:return \$ver}\r\\r
- \n :local major [:pick \$ver 0 \$dot1];\r\\r
- \n :local rest [:pick \$ver (\$dot1 + 1) [:len \$ver]];\r\\r
- \n :local dot2 [:find \$rest \".\"];\r\\r
- \n :local minor \$rest;\r\\r
- \n :if (\$dot2 >= 0) do={:set minor [:pick \$rest 0 \$dot2]}\r\\r
- \n :return (\$major . \".\" . \$minor);\r\\r
- \n }\r\\r
- \n\r\\r
- \n# Compare the major and minor components of both version strings\r\\r
- \n:if ([\$extractMajorMinor \$ver1] = [\$extractMajorMinor \$ver2]) do={:r\\r
- eturn true}\r\\r
- \n :return false;\r\\r
- \n}\r\\r
- \n# Creates backups and returns array of names\r\\r
- \n# Possible arguments:\r\\r
- \n# \$1 - file name, without extension\r\\r
- \n# \$2 - password (optional)\r\\r
- \n# \$3 - sensitive data in config (optional, default: false)\r\\r
- \n# Example:\r\\r
- \n#:put [\$FuncCreateBackups \$backupName]\r\\r
- \n:local FuncCreateBackups do={\r\\r
- \n :local backupName [ :tostr \$1 ];\r\\r
- \n :local BackPass \$2;\r\\r
- \n :local BackSens \$3;\r\\r
- \n\r\\r
- \n #Script messages prefix\r\\r
- \n :local SMP \"BkpAndUpdate:\";\r\\r
- \n :local exitErrorMessage \"\$SMP script stopped due to an error. Please\\r
- \_check logs for more details.\";\r\\r
- \n :log info (\"\$SMP global function `FuncCreateBackups` started, input:\\r
- \_`\$backupName`\");\r\\r
- \n\r\\r
- \n # validate required parameter: backupName\r\\r
- \n :if ([:typeof \$backupName] != \"str\" or [:len \$backupName] = 0) do=\\r
- {\r\\r
- \n :log error \"\$SMP parameter 'backupName' is required and must be a \\r
- non-empty string\";\r\\r
- \n# :log warning \"\$SMP parameter '\\\$backupName' is required and mus\\r
- t be a non-empty string.\\nI set '\\\$backupName' to 'default-backup'\";\r\\r
- \n# :set \$backupName \"default-backup\";\r\\r
- \n :error \$exitErrorMessage;\r\\r
- \n }\r\\r
- \n\r\\r
- \n :local backupFileSys \"\$backupName.backup\";\r\\r
- \n :local backupFileConfig \"\$backupName.rsc\";\r\\r
- \n :local backupNames {\$backupFileSys;\$backupFileConfig};\r\\r
- \n\r\\r
- \n ## Perform system backup\r\\r
- \n :if ([:len \$BackPass] = 0) do={\r\\r
- \n :log info (\"\$SMP starting backup without password, backup name: `\\r
- \$backupName`\");\r\\r
- \n /system backup save dont-encrypt=yes name=\$backupName;\r\\r
- \n } else={\r\\r
- \n :log info (\"\$SMP starting backup with password, backup name: `\$ba\\r
- ckupName`\");\r\\r
- \n /system backup save password=\$BackPass name=\$backupName;\r\\r
- \n }\r\\r
- \n :log info (\"\$SMP system backup created: `\$backupFileSys`\");\r\\r
- \n ## Export config file\r\\r
- \n :if (\$BackSens = true) do={\r\\r
- \n :log info (\"\$SMP starting export config with sensitive data, backu\\r
- p name: `\$backupName`\");\r\\r
- \n # Since RouterOS v7 it needs to be explicitly set that we want to ex\\r
- port sensitive data\r\\r
- \n :if ([:pick [/system resource get version] 0 1] < 7) do={\r\\r
- \n :execute \"/export compact terse file=\$backupName\";\r\\r
- \n } else={\r\\r
- \n :execute \"/export compact show-sensitive terse file=\$backupName\\r
- \";\r\\r
- \n }\r\\r
- \n } else={\r\\r
- \n :log info (\"\$SMP starting export config without sensitive data, ba\\r
- ckup name: `\$backupName`\");\r\\r
- \n /export compact hide-sensitive terse file=\$backupName;\r\\r
- \n }\r\\r
- \n :log info (\"\$SMP Config export complete: `\$backupFileConfig`\");\r\\r
- \n :log info (\"\$SMP Waiting a little to ensure backup files are written\\r
- \");\r\\r
- \n :delay 20;\r\\r
- \n :if ([:len [/file find name=\$backupFileSys]] > 0) do={\r\\r
- \n :log info (\"\$SMP system backup file successfully saved to the file\\r
- \_system: `\$backupFileSys`\");\r\\r
- \n } else={\r\\r
- \n :log error (\"\$SMP system backup was not created, file does not exi\\r
- st: `\$backupFileSys`\");\r\\r
- \n :error \$exitErrorMessage;\r\\r
- \n }\r\\r
- \n :if ([:len [/file find name=\$backupFileConfig]] > 0) do={\r\\r
- \n :log info (\"\$SMP config backup file successfully saved to the file\\r
- \_system: `\$backupFileConfig`\");\r\\r
- \n } else={\r\\r
- \n :log error (\"\$SMP config backup was not created, file does not exi\\r
- st: `\$backupFileConfig`\");\r\\r
- \n :error \$exitErrorMessage;\r\\r
- \n }\r\\r
- \n :log info (\"\$SMP global function `FuncCreateBackups` finished. Creat\\r
- ed backups, system: `\$backupFileSys`, config: `\$backupFileConfig`\")\r\\r
- \n :return \$backupNames;\r\\r
- \n}\r\\r
- \n# Sends an email\r\\r
- \n# Parameters:\r\\r
- \n# \$1 - to (email address)\r\\r
- \n# \$2 - subject\r\\r
- \n# \$3 - body\r\\r
- \n# \$4 - file attachments (optional; pass \"\" if not needed)\r\\r
- \n#\r\\r
- \n# Example:\r\\r
- \n# \$FuncSendEmailSafe \"admin@domain.com\" \"Backup Done\" \"Backup comp\\r
- lete.\" \"backup1.backup\"\r\\r
- \n:local FuncSendEmailSafe do={\r\\r
- \n :global EmailGeneralTo;\r\\r
- \n :local emailSubject \$2;\r\\r
- \n :local emailBody \$3;\r\\r
- \n :local emailAttachments \$4;\r\\r
- \n :local SMP \"Bkp&Upd:\";\r\\r
- \n :local exitErrorMessage \"\$SMP script stopped due to an error. Please\\r
- \_check logs for more details.\";\r\\r
- \n :log info \"\$SMP Attempting to send email to `\$EmailGeneralTo`\";\r\\r
- \n # SAFETY: wait for any previously queued email to finish\r\\r
- \n :local waitTimeoutPre 60;\r\\r
- \n :local waitCounterPre 0;\r\\r
- \n :while (([/tool e-mail get last-status] = \"resolving-dns\" or [/tool \\r
- e-mail get last-status] = \"in-progress\")) do={\r\\r
- \n :if (\$waitCounterPre >= \$waitTimeoutPre) do={\r\\r
- \n :log error \"\$SMP Email send aborted: previous send did not compl\\r
- ete after \$waitTimeoutPre seconds\";\r\\r
- \n :error \$exitErrorMessage;\r\\r
- \n }\r\\r
- \n :log info \"\$SMP Waiting for previous email to finish (status: \$[/\\r
- tool e-mail get last-status])...\";\r\\r
- \n :delay 1; \r\\r
- \n :set waitCounterPre (\$waitCounterPre + 1);\r\\r
- \n }\r\\r
- \n # Send the email\r\\r
- \n :do {\r\\r
- \n /tool e-mail send to=\$EmailGeneralTo subject=\$emailSubject body=\$\\r
- emailBody file=\$emailAttachments;\r\\r
- \n } on-error={\r\\r
- \n :log error \"\$SMP Email send command failed to execute. Check logs \\r
- and verify email settings.\";\r\\r
- \n :error \$exitErrorMessage;\r\\r
- \n }\r\\r
- \n # Wait for send status to change from \"in-progress\" / \"resolving-dn\\r
- s\"\r\\r
- \n :local waitTimeout 60;\r\\r
- \n :local waitCounter 0;\r\\r
- \n :local emailStatus \"\";\r\\r
- \n :log info \"\$SMP Waiting for email to be sent, timeout in `\$waitTime\\r
- out` seconds...\";\r\\r
- \n :while (\$waitCounter < \$waitTimeout) do={\r\\r
- \n :set emailStatus [/tool e-mail get last-status];\r\\r
- \n :if (\$emailStatus != \"in-progress\" and \$emailStatus != \"resolvi\\r
- ng-dns\") do={\r\\r
- \n :log info \"\$SMP Email send status received: \$emailStatus\";\r\\r
- \n # exit loop\r\\r
- \n :set waitCounter \$waitTimeout;\r\\r
- \n } else={:delay 1; :set waitCounter (\$waitCounter + 1)}\r\\r
- \n }\r\\r
- \n # Final decision based on last status\r\\r
- \n :if (\$emailStatus = \"succeeded\") do={\r\\r
- \n :log info \"\$SMP Email successfully sent to `\$EmailGeneralTo`\";\\r
- \r\\r
- \n } else={\r\\r
- \n :log error \"\$SMP Email failed to send. Status: `\$emailStatus`. Ch\\r
- eck logs for more details and verify email settings.\";\r\\r
- \n :error \$exitErrorMessage;\r\\r
- \n }\r\\r
- \n}\r\\r
- \n# Global variable to track current update step\r\\r
- \n# They need to be initialized here first to be available in the script\r\\r
- \n:global buGlobalVarTargetOsVersion;\r\\r
- \n:global buGlobalVarScriptStep;\r\\r
- \n:local scriptStep \$buGlobalVarScriptStep;\r\\r
- \n:do {\r\\r
- \n /system/script/environment remove buGlobalVarScriptStep;\r\\r
- \n} on-error={}\r\\r
- \n:if ([:len \$scriptStep] = 0) do={\r\\r
- \n :set scriptStep 1;\r\\r
- \n}\r\\r
- \n## ^^ FUNCTIONS ^^ ##\r\\r
- \n#\r\\r
- \n# Initial validation\r\\r
- \n## Check email settings\r\\r
- \n:if ([:len \$EmailGeneralTo] < 3) do={\r\\r
- \n :log error (\"\$SMP Parameter `\\\$EmailGeneralTo` is not set, or cont\\r
- ains invalid value. Script stopped.\");\r\\r
- \n :error \$exitErrorMessage;\r\\r
- \n}\r\\r
- \n# Values will be defined later in the script\r\\r
- \n:local emailServer \"\";\r\\r
- \n:local emailFromAddress [/tool e-mail get from];\r\\r
- \n:log info \"\$SMP Validating email settings...\";\r\\r
- \n:do {\r\\r
- \n :set emailServer [/tool e-mail get server];\r\\r
- \n} on-error={\r\\r
- \n # This is a workaround for the RouterOS v7.12 and older versions\r\\r
- \n :set emailServer [/tool e-mail get address];\r\\r
- \n}\r\\r
- \n:if (\$emailServer = \"0.0.0.0\") do={\r\\r
- \n :log error (\"\$SMP Email server address is not correct: `\$emailServe\\r
- r`, check `Tools -> Email`. Script stopped.\");\r\\r
- \n :error \$exitErrorMessage;\r\\r
- \n}\r\\r
- \n:if ([:len \$emailFromAddress] < 3) do={\r\\r
- \n :log error (\"\$SMP Email configuration FROM address is not correct: `\\r
- \$emailFromAddress`, check `Tools -> Email`. Script stopped.\");\r\\r
- \n :error \$exitErrorMessage;\r\\r
- \n}\r\\r
- \n# Script mode validation\r\\r
- \n:if (\$BackupAndUpdateMode != \"backup\" and \$BackupAndUpdateMode != \"\\r
- osupdate\" and \$BackupAndUpdateMode != \"updateOnce\" and \$BackupAndUpda\\r
- teMode != \"osnotify\") do={\r\\r
- \n :log error (\"\$SMP Script parameter `\\\$BackupAndUpdateMode` is not \\r
- set, or contains invalid value: `\$BackupAndUpdateMode`. Script stopped.\"\\r
- );\r\\r
- \n :error \$exitErrorMessage;\r\\r
- \n}\r\\r
- \n# Update channel validation\r\\r
- \n:if (\$updateChannel != \"stable\" and \$updateChannel != \"long-term\" \\r
- and \$updateChannel != \"testing\" and \$updateChannel != \"development\")\\r
- \_do={\r\\r
- \n :log error (\"\$SMP Script parameter `\\\$updateChannel` is not set, o\\r
- r contains invalid value: `\$updateChannel`. Script stopped.\");\r\\r
- \n :error \$exitErrorMessage;\r\\r
- \n}\r\\r
- \n# Verify if script is set to install patch updates and if the update cha\\r
- nnel is valid\r\\r
- \n:if ((\$BackupAndUpdateMode = \"osupdate\" or \$BackupAndUpdateMode = \"\\r
- updateOnce\") and \$installOnlyPatchUpdates = true) do={\r\\r
- \n :if (\$updateChannel != \"stable\" and \$updateChannel != \"long-term\\r
- \") do={\r\\r
- \n :log error (\"\$SMP Patch-only updates enabled, but update channel `\\r
- \$updateChannel` is invalid. Only `stable` and `long-term` are supported. \\r
- Script stopped\");\r\\r
- \n :error \$exitErrorMessage;\r\\r
- \n }\r\\r
- \n \r\\r
- \n :if (\$runningChannel != \"stable\" and \$runningChannel != \"long-ter\\r
- m\") do={\r\\r
- \n :log error (\"\$SMP Script is set to install only patch updates, but\\r
- \_the installed RouterOS version is not from `stable` or `long-term` chann\\r
- el: `\$runningChannel`. Script stopped\");\r\\r
- \n :error \$exitErrorMessage;\r\\r
- \n }\r\\r
- \n}\r\\r
- \n#\r\\r
- \n\r\\r
- \n:local rawTime [/system clock get time];\r\\r
- \n:local rawDate [/system clock get date];\r\\r
- \n\r\\r
- \n:local deviceOsVerAndChannelRunning [/system/resource/get version];\r\\r
- \n\r\\r
- \n:local backupNameTemplate (\"backup_v\" . \$runningVersion . \"_\" .\\r
- \_\$runningChannel . \"_\" . \$MDTSFix);\r\\r
- \n:local backupNameBeforeUpdate (\$backupNameTemplate . \"_before_update\"\\r
- );\r\\r
- \n:local backupNameAfterUpdate (\$backupNameTemplate . \"_after_update\")\\r
- ;\r\\r
- \n\r\\r
- \n## Email body template\r\\r
- \n:local mailSubjectPrefix \"\$SMP Device - `\$IdentityShort`\";\r\\r
- \n:local mailBodyCopyright \"Mikrotik RouterOS automatic backup & update \\r
- (ver. \$scriptVersion) \\n\$copyrightUrl\";\r\\r
- \n:local changelogUrl \"Check RouterOS changelog: https://mikrotik.com\\r
- /download/changelogs/\";\r\\r
- \n:local mailBodyDeviceInfo \"\";\r\\r
- \n:set mailBodyDeviceInfo (\$mailBodyDeviceInfo . \"Device information:\")\\r
- ;\r\\r
- \n:set mailBodyDeviceInfo (\$mailBodyDeviceInfo . \"\\n-------------------\\r
- --\");\r\\r
- \n:set mailBodyDeviceInfo (\$mailBodyDeviceInfo . \"\\nName: \$Identity\")\\r
- ;\r\\r
- \n:set mailBodyDeviceInfo (\$mailBodyDeviceInfo . \"\\nModel: \$devModel\"\\r
- );\r\\r
- \n:set mailBodyDeviceInfo (\$mailBodyDeviceInfo . \"\\nBoard: \$devBoardNa\\r
- me\");\r\\r
- \n:set mailBodyDeviceInfo (\$mailBodyDeviceInfo . \"\\nSerial number: \$de\\r
- vRbSerialNumber\");\r\\r
- \n:set mailBodyDeviceInfo (\$mailBodyDeviceInfo . \"\\nRouterOS version: v\\r
- \$deviceOsVerAndChannelRunning\");\r\\r
- \n:set mailBodyDeviceInfo (\$mailBodyDeviceInfo . \"\\nBuild time: \$[/sys\\r
- tem/resource/get build-time]\");\r\\r
- \n:set mailBodyDeviceInfo (\$mailBodyDeviceInfo . \"\\nRouterboard FW Avai\\r
- lable: \$ROsVerAvail\");\r\\r
- \n:set mailBodyDeviceInfo (\$mailBodyDeviceInfo . \"\\nDevice date-time: \\r
- \$rawDate \$rawTime (\$[/system/clock/get time-zone-name ])\");\r\\r
- \n:set mailBodyDeviceInfo (\$mailBodyDeviceInfo . \"\\nUptime: \$[/system/\\r
- resource/get uptime]\");\r\\r
- \n## IP address detection\r\\r
- \n:if ([ \$DevInfoIncludeIP ] = true) do={\r\\r
- \n :global GetPubIp;\r\\r
- \n :local PublicIpAddress [ \$GetPubIp ];\r\\r
- \n :set mailBodyDeviceInfo (\$mailBodyDeviceInfo . \"\\nPublic IP address\\r
- : \" . \$PublicIpAddress . \".\");\r\\r
- \n :log info \"\$SMP Public IP address detected: \$PublicIpAddress\";\r\\r
- \n} \r\\r
- \n\r\\r
- \n:local mailAttachments [:toarray \"\"];\r\\r
- \n:if (\$scriptStep = 1 or \$scriptStep = 3) do={\r\\r
- \n :if (\$scriptStep = 3) do={\r\\r
- \n :log info (\"\$SMP Waiting for one minute before continuing to the f\\r
- inal step.\");\r\\r
- \n :delay 1m;\r\\r
- \n }\r\\r
- \n}\r\\r
- \n\r\\r
- \n## STEP 1: Create backups, check for new RouterOS, and send email\r\\r
- \n## Steps 2\C3\A23 run only if auto-update is enabled and a new version i\\r
- s available\r\\r
- \n:if (\$scriptStep = 1) do={\r\\r
- \n :global BackupPassword;\r\\r
- \n :global BackupSens;\r\\r
- \n :local isNewOsUpdateAvailable false;\r\\r
- \n :local isLatestOsAlreadyInstalled true;\r\\r
- \n :local isOsNeedsToBeUpdated false;\r\\r
- \n :local isUpdateCheckSucceeded false;\r\\r
- \n :local isEmailNeedsToBeSent false;\r\\r
- \n :local mailSubjectPartAction \"\";\r\\r
- \n :local mailPtBodyAction \"\";\r\\r
- \n :local mailPtSubjectBackup \"\";\r\\r
- \n :local mailPtBodyBackup \"\";\r\\r
- \n # Checking for new version\r\\r
- \n :if (\$BackupAndUpdateMode = \"osupdate\" or \$BackupAndUpdateMode = \\r
- \"osnotify\" or \$BackupAndUpdateMode = \"updateOnce\") do={\r\\r
- \n :log info (\"\$SMP Setting update channel to `\$updateChannel`\");\r\\r
- \n /system/package/update/set channel=\$updateChannel;\r\\r
- \n :log info (\"\$SMP Checking for new RouterOS version. Current instal\\r
- led version is: `\$runningVersion`\");\r\\r
- \n \$LogPrint debug \$ScriptName (\"Checking for updates...\");\r\\r
- \n \r\\r
- \n# /system/package/update/check-for-updates without-paging as-value;\\r
- \r\\r
- \n# /system/package/update check-for-updates;\r\\r
- \n :delay 5s;\r\\r
- \n :set PkgUpdStatus [ /system/package/update/get status ];\r\\r
- \n :if (\$PkgUpdStatus = \"New version is available\") do={\r\\r
- \n :set ROsVerAvail [/system/package/update/get latest-version];\r\\r
- \n }\r\\r
- \n\r\\r
- \n :if (\$PkgUpdStatus = \"New version is available\") do={\r\\r
- \n :log info (\"\$SMP New RouterOS version is available: `\$ROsVerAva\\r
- il`\");\r\\r
- \n :set isNewOsUpdateAvailable true;\r\\r
- \n :set isLatestOsAlreadyInstalled false;\r\\r
- \n :set isUpdateCheckSucceeded true;\r\\r
- \n :set isEmailNeedsToBeSent true;\r\\r
- \n :set mailSubjectPartAction \"New RouterOS available\";\r\\r
- \n :set mailPtBodyAction \"New RouterOS version is available, curren\\r
- t version: v\$runningVersion, new version: v\$ROsVerAvail. \\n\$changelogU\\r
- rl\";\r\\r
- \n } else={\r\\r
- \n :if (\$PkgUpdStatus = \"System is already up to date\") do={\r\\r
- \n :log info (\"\$SMP No new RouterOS version is available, the lat\\r
- est version is already installed: `v\$runningVersion`\");\r\\r
- \n :set isUpdateCheckSucceeded true;\r\\r
- \n :set mailSubjectPartAction \"No os update available\";\r\\r
- \n :set mailPtBodyAction \"No new RouterOS version is available, t\\r
- he latest version is already installed: `v\$runningVersion`\";\r\\r
- \n } else={\r\\r
- \n :log error (\"\$SMP Failed to check for new RouterOS version. Pa\\r
- ckage check status: `\$PkgUpdStatus`\");\r\\r
- \n :set isEmailNeedsToBeSent true;\r\\r
- \n :set mailSubjectPartAction \"Error unable to check new os versio\\r
- n\";\r\\r
- \n :set mailPtBodyAction \"An error occurred while checking for a \\r
- new RouterOS version.\\nStatus returned: `\$PkgUpdStatus`\\n\\nPlease revi\\r
- ew the logs on the device for more details and verify internet connectivit\\r
- y.\";\r\\r
- \n }\r\\r
- \n }\r\\r
- \n }\r\\r
- \n # Checking if the script needs to install new os version\r\\r
- \n :if ((\$BackupAndUpdateMode = \"osupdate\" or \$BackupAndUpdateMode = \\r
- \"updateOnce\") and \$isNewOsUpdateAvailable = true) do={\r\\r
- \n :if (\$installOnlyPatchUpdates = true) do={\r\\r
- \n :if ([\$FuncIsPatchUpdateOnly \$runningVersion \$ROsVerAvail] = tr\\r
- ue) do={\r\\r
- \n :log info \"\$SMP New RouterOS version is available, and it is a\\r
- \_patch update. Current version: v\$runningVersion, new version: v\$ROsVer\\r
- Avail\";\r\\r
- \n :set isOsNeedsToBeUpdated true;\r\\r
- \n } else={\r\\r
- \n :log info \"\$SMP The script will not install this update, becau\\r
- se it is not a patch update. Current version: v\$runningVersion, new versi\\r
- on: v\$ROsVerAvail\";\r\\r
- \n :set mailPtBodyAction (\$mailPtBodyAction . \"\\nThis update wil\\r
- l not be installed, because the script is set to install only patch update\\r
- s.\");\r\\r
- \n }\r\\r
- \n } else={\r\\r
- \n :set isOsNeedsToBeUpdated true;\r\\r
- \n }\r\\r
- \n }\r\\r
- \n # Checking If the script needs to create a backup\r\\r
- \n :if (\$forceBackup = true or \$BackupAndUpdateMode = \"backup\" or \$i\\r
- sOsNeedsToBeUpdated = true) do={\r\\r
- \n :log info (\"\$SMP Starting backup process.\");\r\\r
- \n :set isEmailNeedsToBeSent true;\r\\r
- \n :local backupName \$backupNameTemplate;\r\\r
- \n # This means it's the first step where we create a backup before the\\r
- \_update process\r\\r
- \n :if (\$isOsNeedsToBeUpdated = true) do={\r\\r
- \n :set backupName \$backupNameBeforeUpdate;\r\\r
- \n #Email body if the purpose of the script is to update the device\r\\r
- \n :set mailSubjectPartAction \"Update preparation\";\r\\r
- \n :set mailPtBodyAction (\$mailPtBodyAction . \"\\nThe update proces\\r
- s for device '\$Identity' is scheduled to upgrade RouterOS from version v.\\r
- \$runningVersion to version v.\$ROsVerAvail (Update channel: \$updateChann\\r
- el)\");\r\\r
- \n :set mailPtBodyAction (\$mailPtBodyAction . \"\\nPlease note: The \\r
- update will proceed only after a successful backup.\");\r\\r
- \n :set mailPtBodyAction (\$mailPtBodyAction . \"\\nA final report wi\\r
- th detailed information will be sent once the update process is completed.\\r
- \");\r\\r
- \n :set mailPtBodyAction (\$mailPtBodyAction . \"\\nIf you do not rec\\r
- eive a second email within the next 10 minutes, there may be an issue. Ple\\r
- ase check your device logs for further information.\");\r\\r
- \n }\r\\r
- \n :do {\r\\r
- \n :set mailAttachments [\$FuncCreateBackups \$backupName \$BackupPas\\r
- sword \$BackupSens];\r\\r
- \n :set mailPtSubjectBackup \"Backup created\";\r\\r
- \n :set mailPtBodyBackup \"System backups have been successfully crea\\r
- ted and attached to this email.\";\r\\r
- \n } on-error={\r\\r
- \n :set isOsNeedsToBeUpdated false;\r\\r
- \n :set mailPtSubjectBackup \"Backup failed\";\r\\r
- \n :set mailPtBodyBackup \"The script failed to create backups. Pleas\\r
- e check device logs for more details.\";\r\\r
- \n :log warning \"\$SMP Backup creation failed. Update process will b\\r
- e canceled if automatic update is enabled\";\r\\r
- \n }\r\\r
- \n }\r\\r
- \n :if (\$isEmailNeedsToBeSent = true) do={\r\\r
- \n :log info \"\$SMP Preparing to send email...\";\r\\r
- \n :local mailStep1Subject \$mailSubjectPrefix;\r\\r
- \n :local mailStep1Body \"\";\r\\r
- \n # subject\r\\r
- \n :if (\$mailSubjectPartAction != \"\") do={:set mailStep1Subject (\$\\r
- mailStep1Subject . \" - \" . \$mailSubjectPartAction)}\r\\r
- \n :if (\$mailPtSubjectBackup != \"\") do={:set mailStep1Subject (\$ma\\r
- ilStep1Subject . \" - \" . \$mailPtSubjectBackup)}\r\\r
- \n # body\r\\r
- \n :if (\$mailPtBodyAction != \"\") do={:set mailStep1Body (\$mailStep1\\r
- Body . \$mailPtBodyAction . \"\\n\\n\")}\r\\r
- \n :if (\$mailPtBodyBackup != \"\") do={:set mailStep1Body (\$mailStep1\\r
- Body . \$mailPtBodyBackup . \"\\n\\n\")}\r\\r
- \n :set mailStep1Body (\$mailStep1Body . \$mailBodyDeviceInfo . \"\\n__\\r
- ________\\n\" . \$mailBodyCopyright);\r\\r
- \n :set mailStep1Body (\$mailStep1Body . \"\\n[*** TEST START ***]\\n\\\\r
- \$DeviceInfo: \" . [ \$DeviceInfo ] . \"\\n[*** TEST END ***]\\n\");\r\\r
- \n # Send email with backups\r\\r
- \n :do {\$FuncSendEmailSafe \$EmailGeneralTo \$mailStep1Subject \$mailS\\r
- tep1Body \$mailAttachments} on-error={\r\\r
- \n :set isOsNeedsToBeUpdated false;\r\\r
- \n :log error \"\$SMP The script will not proceed with the update pro\\r
- cess, because the email was not sent.\";\r\\r
- \n }\r\\r
- \n }\r\\r
- \n :if ([:len \$mailAttachments] > 0) do={\r\\r
- \n :log info \"\$SMP Cleaning up backup files from the file system...\"\\r
- ;\r\\r
- \n /file remove \$mailAttachments;\r\\r
- \n :delay 2s;\r\\r
- \n }\r\\r
- \n :if (\$isOsNeedsToBeUpdated = true) do={\r\\r
- \n :global OldMode;\r\\r
- \n :log info \"\$SMP everything is ready to install new RouterOS, going\\r
- \_to start the update process and reboot the device.\";\r\\r
- \n :do {\r\\r
- \n :local nextStep 2;\r\\r
- \n :if (\$isCloudHostedRouter = true) do={\r\\r
- \n :log info \"\$SMP The device is a cloud hosted router, the secon\\r
- d step updating the Routerboard firmware will be skipped.\";\r\\r
- \n :set nextStep 3;\r\\r
- \n }\r\\r
- \n :local scheduledCommand (\":delay 5s; /system/scheduler remove BKP\\r
- UPD-NEXT-BOOT-TASK; \\\r\\r
- \n :global buGlobalVarScriptStep \$nextStep; :global buGlobalVarTarg\\r
- etOsVersion \\\"\$ROsVerAvail\\\"; \\\r\\r
- \n :delay 10s; /system/script { run \$ScriptName; }\");\r\\r
- \n /system/scheduler add name=BKPUPD-NEXT-BOOT-TASK on-event=\$schedu\\r
- ledCommand start-time=startup interval=0;\r\\r
- \n /system/package/update install;\r\\r
- \n } on-error={\r\\r
- \n # Failed to install new os version, remove the task and variables\\r
- \r\\r
- \n :do {\r\\r
- \n /system/scheduler remove BKPUPD-NEXT-BOOT-TASK;\r\\r
- \n :set BackupAndUpdateMode \$OldMode;\r\\r
- \n :delay 2;\r\\r
- \n :do {\r\\r
- \n :global buGlobalVarTargetOsVersion (a);\r\\r
- \n } on-error={\r\\r
- \n :set \$mailSubjectPrefix (\$mailSubjectPrefix . \"ERROR Remove\\r
- \_global variable \\\$buGlobalVarTargetOsVersion failed!\");\r\\r
- \n }\r\\r
- \n# :if ([ :len \$OldMode ] > 0) do={\r\\r
- \n# :do {\r\\r
- \n# :global OldMode (a);\r\\r
- \n# } on-error={\r\\r
- \n# :set \$mailSubjectPrefix (\$mailSubjectPrefix . \" ERROR Re\\r
- move global variable \\\$OldMode failed!\");\r\\r
- \n# }\r\\r
- \n# }\r\\r
- \n } on-error={\r\\r
- \n :log error \"\$SMP Failed to install new RouterOS version. Pleas\\r
- e check device logs for more details. \\\r\\r
- \n \\nAnd Failed to remove task and variables! Check it!\";\r\\r
- \n :set \$mailSubjectPrefix (\$mailSubjectPrefix . \" ERROR Remove \\r
- task and global variables!\");\r\\r
- \n }\r\\r
- \n :log error \"\$SMP Failed to install new RouterOS version. Please \\r
- check device logs for more details.\";\r\\r
- \n :local mailUpdateErrorSubject (\$mailSubjectPrefix . \" - Update f\\r
- ailed\");\r\\r
- \n :local mailUpdateErrorBody \"The script was unable to install new \\r
- RouterOS version. Please check device logs for more details.\";\r\\r
- \n # Send email with error\r\\r
- \n \$FuncSendEmailSafe \$EmailGeneralTo \$mailUpdateErrorSubject \$ma\\r
- ilUpdateErrorBody \"\";\r\\r
- \n :error \$exitErrorMessage;\r\\r
- \n }\r\\r
- \n }\r\\r
- \n}\r\\r
- \n## STEP 2: (Post-reboot) Upgrade RouterBOARD firmware\r\\r
- \n## Runs only if auto-update is enabled and a new RouterOS version was fo\\r
- und\r\\r
- \n:if (\$scriptStep = 2) do={\r\\r
- \n :log info \"\$SMP The script is in the second step, updating Routerboa\\r
- rd firmware.\";\r\\r
- \n :log info \"\$SMP Upgrading routerboard firmware from v.\$deviceRbCurr\\r
- entFw to v.\$deviceRbUpgradeFw\";\r\\r
- \n /system routerboard upgrade;\r\\r
- \n :delay 2;\r\\r
- \n :log info \"\$SMP routerboard upgrade process was completed, going to \\r
- reboot in a moment!\";\r\\r
- \n ## Set task to send final report on the next boot\r\\r
- \n /system scheduler add name=BKPUPD-NEXT-BOOT-TASK on-event=\":delay 2; \\r
- :global buGlobalVarScriptStep 3; \\\r\\r
- \n :global buGlobalVarTargetOsVersion \\\"\$buGlobalVarTargetOsVersion\\\\r
- \"; :delay 10s; /system/script { run \$ScriptName; }; \\ \r\\r
- \n :delay 5s; /system/scheduler remove BKPUPD-NEXT-BOOT-TASK;\" start-ti\\r
- me=startup interval=0;\r\\r
- \n :delay 2;\r\\r
- \n /system reboot;\r\\r
- \n}\r\\r
- \n\r\\r
- \n## STEP 3: Final report (after second reboot, with delay).\r\\r
- \n## Runs only if auto-update is enabled and a new RouterOS version was fo\\r
- und.\r\\r
- \n:if (\$scriptStep = 3) do={\r\\r
- \n :log info (\"\$SMP The script is in the third step, sending final repo\\r
- rt.\");\r\\r
- \n :local targetOsVersion \$buGlobalVarTargetOsVersion;\r\\r
- \n :do {\r\\r
- \n# /system/script/environment remove [find name=\"buGlobalVarTargetOsV\\r
- ersion\"];\r\\r
- \n :global buGlobalVarTargetOsVersion (a);\r\\r
- \n } on-error={\r\\r
- \n :set \$mailSubjectPrefix (\$mailSubjectPrefix . \" ERROR Remove glob\\r
- al variable \\\$buGlobalVarTargetOsVersion failed!\");\r\\r
- \n }\r\\r
- \n\r\\r
- \n :if ([ :len \$OldMode ] != 0) do={\r\\r
- \n :do {\r\\r
- \n# /system/script/environment remove [find name=\"OldMode\"];\r\\r
- \n :global OldMode (a);\r\\r
- \n } on-error={\r\\r
- \n :set \$mailSubjectPrefix (\$mailSubjectPrefix . \" ERROR! Remove\\r
- \_global variable \\\$OldMode failed!\");\r\\r
- \n }\r\\r
- \n }\r\\r
- \n :if ([:len \$targetOsVersion] = 0) do={\r\\r
- \n :log warning \"\$SMP Something is wrong, the script was unable to ge\\r
- t the target updated OS version from the global variable.\";\r\\r
- \n }\r\\r
- \n :local mailStep3Subject \$mailSubjectPrefix;\r\\r
- \n :local mailStep3Body \"\";\r\\r
- \n :if (\$targetOsVersion = \$runningVersion) do={\r\\r
- \n :log info \"\$SMP Successfully verified new RouterOS version: target\\r
- : `\$targetOsVersion`, current: `\$runningVersion`\";\r\\r
- \n :set mailStep3Subject (\$mailStep3Subject . \" - Update completed - \\r
- Backup created\");\r\\r
- \n :set mailStep3Body (\$mailStep3Body . \"RouterOS and routerboard upg\\r
- rade process was completed\");\r\\r
- \n :set mailStep3Body (\$mailStep3Body . \"\\nNew RouterOS version: v.\\r
- \$targetOsVersion, routerboard firmware: v.\$deviceRbCurrentFw\");\r\\r
- \n :set mailStep3Body (\$mailStep3Body . \"\\n\$changelogUrl\\nBackups \\r
- of the upgraded system are in the attachment of this email.\\n\\n\$mailBod\\r
- yDeviceInfo\\n\\n\$mailBodyCopyright\");\r\\r
- \n :set mailAttachments [\$FuncCreateBackups \$backupNameAfterUpdate \$\\r
- BackupPassword \$BackupSens];\r\\r
- \n } else={\r\\r
- \n :log error \"\$SMP Failed to verify new RouterOS version: target: `\\r
- \$targetOsVersion`, current: `\$runningVersion`\";\r\\r
- \n :set mailStep3Subject (\$mailStep3Subject . \" - Update failed\");\r\\r
- \n :set mailStep3Body (\$mailStep3Body . \"The script was unable to ver\\r
- ify that the new RouterOS version was installed, target version: `\$target\\r
- OsVersion`, current version: `\$runningVersion`\\nCheck device logs for mo\\r
- re details.\\n\\n\$mailBodyDeviceInfo\\n\\n\$mailBodyCopyright\");\r\\r
- \n }\r\\r
- \n \$FuncSendEmailSafe \$EmailGeneralTo \$mailStep3Subject \$mailStep3Bod\\r
- y \$mailAttachments;\r\\r
- \n :if ([:len \$mailAttachments] > 0) do={\r\\r
- \n :log info \"\$SMP Cleaning up backup files from the file system...\"\\r
- ;\r\\r
- \n /file remove \$mailAttachments;\r\\r
- \n :delay 2;\r\\r
- \n }\r\\r
- \n :log info (\"\$SMP Final report email sent successfully, and the scrip\\r
- t has finished.\");\r\\r
- \n}\r\\r
- \n:log info (\"\$SMP the script has finished, script step: `\$scriptStep` \\r
- \\n\\n\");\r\\r
- \n\r\\r
- \n} do={:global ExitError; \$ExitError \$ExitOK [ :jobname ] \$Err}\r\\r
- \n"\r
-add comment="download, import and update firewall address-lists" \\r
- dont-require-permissions=no name=AM-FwAddrLists owner=AM-FwAddrLists \\r
- policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \\r
- source="#!rsc by Vados\r\\r
- \n# RouterOS script: AM-FwAddrLists\r\\r
- \n# Script comment: download, import and update firewall address-lists\r\\r
- \n# Copyright (c) 2007-2026 Vados <vados@vados.ru>\r\\r
- \n#\r\\r
- \n#\r\\r
- \n# requires RouterOS, version=7.19\r\\r
- \n# https://ros.vados.ru/doc/fw-addr-lists.md\r\\r
- \n:local ExitOK false;\r\\r
- \n:onerror Err {\r\\r
- \n :global GlobalConfReady; :global GlobalFuncReady;\r\\r
- \n :retry { :if (\$GlobalConfReady != true || \$GlobalFuncReady != true) \\r
- \\\r\\r
- \n do={ :error (\"Global config and/or functions not ready.\"); }; } \\r
- delay=500ms max=50;\r\\r
- \n :local ScriptName [ :jobname ];\r\\r
- \n\r\\r
- \n :global GlobalScriptsUrl;\r\\r
- \n :local FwAddrListsUrl (\$GlobalScriptsUrl . \"fw-addr-lists.d/\");\r\\r
- \n\r\\r
- \n :local FwAddrLists {\r\\r
- \n \"allow\"={\r\\r
- \n { url=(\$FwAddrListsUrl . \"allow\");\r\\r
- \n cert=\"ISRG Root X2\"; timeout=1w };\r\\r
- \n };\r\\r
- \n \"block\"={\r\\r
- \n { url=(\$FwAddrListsUrl . \"block\");\r\\r
- \n cert=\"ISRG Root X2\" };\r\\r
- \n# { url=\"https://raw.githubusercontent.com/stamparm/ipsum/refs/hea\\r
- ds/master/levels/4.txt\";\r\\r
- \n# # higher level (decrease the numerical value) for more addresses, \\r
- and vice versa\r\\r
- \n# cert=\"ISRG Root X1\" };\r\\r
- \n# { url=\"https://www.dshield.org/block.txt\"; cidr=\"/24\";\r\\r
- \n# cert=\"GTS Root R4\" };\r\\r
- \n# { url=\"https://lists.blocklist.de/lists/strongips.txt\";\r\\r
- \n# cert=\"GTS Root R4\" };\r\\r
- \n# { url=\"https://www.spamhaus.org/drop/drop_v4.json\";\r\\r
- \n# cert=\"GTS Root R4\" };\r\\r
- \n# { url=\"https://www.spamhaus.org/drop/drop_v6.json\";\r\\r
- \n# cert=\"GTS Root R4\" };\r\\r
- \n };\r\\r
- \n# \"mikrotik\"={\r\\r
- \n# { url=(\$FwAddrListsUrl . \"mikrotik\");\r\\r
- \n# cert=\"ISRG Root X2\"; timeout=1w };\r\\r
- \n# };\r\\r
- \n \"FuckRKN\"={\r\\r
- \n { url=(\$FwAddrListsUrl . \"FuckRKN\");\r\\r
- \n cert=\"ISRG Root X2\"; timeout=1w };\r\\r
- \n };\r\\r
- \n };\r\\r
- \n :local FwAddrListTimeOut 1d;\r\\r
- \n\r\\r
- \n :global CertificateAvailable;\r\\r
- \n :global EitherOr;\r\\r
- \n :global FetchHuge;\r\\r
- \n :global HumanReadableNum;\r\\r
- \n :global IfThenElse;\r\\r
- \n :global LogPrint;\r\\r
- \n\r\\r
- \n :global NetMask4;\r\\r
- \n :global NetMask6;\r\\r
- \n :global ScriptLock;\r\\r
- \n \r\\r
- \n :local FindDelim do={\r\\r
- \n :local ValidChars \"0123456789.:/ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghi\\r
- jklmnopqrstuvwxyz-\";\r\\r
- \n :for I from=0 to=[ :len \$1 ] do={\r\\r
- \n :if ([ :typeof [ :find \$ValidChars [ :pick (\$1 . \" \") \$I ] ] \\r
- ] != \"num\") do={\r\\r
- \n :return \$I;\r\\r
- \n }\r\\r
- \n }\r\\r
- \n }\r\\r
- \n\r\\r
- \n :local GetBranch do={\r\\r
- \n :global EitherOr;\r\\r
- \n :return [ :pick [ :convert transform=md5 to=hex [ :pick \$1 0 [ \$Ei\\r
- therOr [ :find \$1 \"/\" ] [ :len \$1 ] ] ] ] 0 2 ];\r\\r
- \n }\r\\r
- \n \r\\r
- \n :if ([ \$ScriptLock \$ScriptName ] = false) do={\r\\r
- \n :set ExitOK true;\r\\r
- \n :error false;\r\\r
- \n }\r\\r
- \n\r\\r
- \n :if ([ :len [ /log/find where topics=({\"script\"; \"warning\"}) \\\r\\r
- \n message=(\"\\\$LogPrint: The message is already in log, scripting \\r
- subsystem may have crashed before!\") ] ] > 0) do={\r\\r
- \n :log warning (\$ScriptName . \" Scripting subsystem may have crashed\\r
- , possibly caused by us. Delaying!\");\r\\r
- \n :delay 5m;\r\\r
- \n }\r\\r
- \n\r\\r
- \n :local ListComment (\"managed by \" . \$ScriptName);\r\\r
- \n\r\\r
- \n :foreach FwListName,FwList in=\$FwAddrLists do={\r\\r
- \n :local CntAdd 0;\r\\r
- \n :local CntRenew 0;\r\\r
- \n :local CntRemove 0;\r\\r
- \n :local IPv4Addresses ({});\r\\r
- \n :local IPv6Addresses ({});\r\\r
- \n :local Failure false;\r\\r
- \n\r\\r
- \n :foreach List in=\$FwList do={\r\\r
- \n :local CheckCertificate false;\r\\r
- \n :local Data false;\r\\r
- \n :local TimeOut [ \$EitherOr [ :totime (\$List->\"timeout\") ] \$Fw\\r
- AddrListTimeOut ];\r\\r
- \n\r\\r
- \n :if ([ :len (\$List->\"cert\") ] > 0) do={\r\\r
- \n :set CheckCertificate true;\r\\r
- \n :if ([ \$CertificateAvailable (\$List->\"cert\") \"fetch\" ] = f\\r
- alse) do={\r\\r
- \n :log warning (\$ScriptName . \" Downloading required certifica\\r
- te (\" . \$FwListName . \\\r\\r
- \n \" / \" . \$List->\"url\" . \") failed, trying anyway.\");\\r
- \r\\r
- \n }\r\\r
- \n }\r\\r
- \n\r\\r
- \n :for I from=1 to=5 do={\r\\r
- \n :if (\$Data = false) do={\r\\r
- \n :set Data [ :tolf [ \$FetchHuge \$ScriptName (\$List->\"url\")\\r
- \_\$CheckCertificate ] ];\r\\r
- \n :if (\$Data = false) do={\r\\r
- \n :if (\$I < 5) do={\r\\r
- \n :log debug (\$ScriptName . \" Failed downloading for list \\r
- '\" . \$FwListName . \\\r\\r
- \n \"', \" . \$I . \". try from: \" . \$List->\"url\");\r\\r
- \n :delay ((\$I * \$I) . \"s\");\r\\r
- \n }\r\\r
- \n }\r\\r
- \n }\r\\r
- \n }\r\\r
- \n\r\\r
- \n :if (\$Data = false) do={\r\\r
- \n :set Data \"\";\r\\r
- \n :set Failure true;\r\\r
- \n :log warning (\$ScriptName . \" Failed downloading for list '\" \\r
- . \$FwListName . \\\r\\r
- \n \"' from: \" . \$List->\"url\");\r\\r
- \n } else={\r\\r
- \n :log debug (\$ScriptName . \" Downloaded \" . [ \$HumanReadableN\\r
- um [ :len \$Data ] 1024 ] . \\\r\\r
- \n \"B for list '\" . \$FwListName . \"' from: \" . \$List->\"u\\r
- rl\");\r\\r
- \n }\r\\r
- \n\r\\r
- \n :foreach Line in=[ :deserialize \$Data delimiter=\"\\n\" from=dsv \\r
- options=dsv.plain ] do={\r\\r
- \n :set Line (\$Line->0);\r\\r
- \n :local Address;\r\\r
- \n :if ([ :pick \$Line 0 1 ] = \"{\" && [ :pick \$Line ([ :len \$Li\\r
- ne ] - 1) ] = \"}\") do={\r\\r
- \n :do {\r\\r
- \n :set Address [ :tostr ([ :deserialize from=json \$Line ]->\"\\r
- cidr\") ];\r\\r
- \n } on-error={ }\r\\r
- \n } else={\r\\r
- \n :set Address ([ :pick \$Line 0 [ \$FindDelim \$Line ] ] . (\$L\\r
- ist->\"cidr\"));\r\\r
- \n }\r\\r
- \n :do {\r\\r
- \n :local Branch;\r\\r
- \n :if (\$Address ~ \"^[0-9]{1,3}\\\\.[0-9]{1,3}\\\\.[0-9]{1,3}\\\\r
- \\.[0-9]{1,3}(/[0-9]{1,2})\?\\\$\") do={\r\\r
- \n :local Net \$Address;\r\\r
- \n :local CIDR 32;\r\\r
- \n :local Slash [ :find \$Address \"/\" ];\r\\r
- \n :if ([ :typeof \$Slash ] = \"num\") do={\r\\r
- \n :set Net [ :toip [ :pick \$Address 0 \$Slash ] ]\r\\r
- \n :set CIDR [ :pick \$Address (\$Slash + 1) [ :len \$Address\\r
- \_] ];\r\\r
- \n :set Address [ :tostr (([ :toip \$Net ] & [ \$NetMask4 \$C\\r
- IDR ]) . [ \$IfThenElse (\$CIDR < 32) (\"/\" . \$CIDR) ]) ];\r\\r
- \n }\r\\r
- \n :set Branch [ \$GetBranch \$Address ];\r\\r
- \n :set (\$IPv4Addresses->\$Branch->\$Address) \$TimeOut;\r\\r
- \n :error true;\r\\r
- \n }\r\\r
- \n :if (\$Address ~ \"^[0-9a-zA-Z]*:[0-9a-zA-Z:\\\\.]+(/[0-9]{1,3\\r
- })\?\\\$\") do={\r\\r
- \n :local Net \$Address;\r\\r
- \n :local CIDR 128;\r\\r
- \n :local Slash [ :find \$Address \"/\" ];\r\\r
- \n :if ([ :typeof \$Slash ] = \"num\") do={\r\\r
- \n :set Net [ :toip6 [ :pick \$Address 0 \$Slash ] ]\r\\r
- \n :set CIDR [ :pick \$Address (\$Slash + 1) [ :len \$Address\\r
- \_] ];\r\\r
- \n }\r\\r
- \n :set Address (([ :toip6 \$Net ] & [ \$NetMask6 \$CIDR ]) . \\r
- \"/\" . \$CIDR);\r\\r
- \n :set Branch [ \$GetBranch \$Address ];\r\\r
- \n :set (\$IPv6Addresses->\$Branch->\$Address) \$TimeOut;\r\\r
- \n :error true;\r\\r
- \n }\r\\r
- \n :if (\$Address ~ \"^[\\\\.a-zA-Z0-9-]+\\\\.[a-zA-Z]{2,}\\\$\")\\r
- \_do={\r\\r
- \n :set Branch [ \$GetBranch \$Address ];\r\\r
- \n :set (\$IPv4Addresses->\$Branch->\$Address) \$TimeOut;\r\\r
- \n :set (\$IPv6Addresses->\$Branch->\$Address) \$TimeOut;\r\\r
- \n :error true;\r\\r
- \n }\r\\r
- \n } on-error={:log error (\$ScriptName . \" Failed parsing address\\r
- : \" . \$Line->0);}\r\\r
- \n }\r\\r
- \n }\r\\r
- \n\r\\r
- \n :foreach Entry in=[ /ip/firewall/address-list/find where \\\r\\r
- \n list=\$FwListName comment=\$ListComment ] do={\r\\r
- \n :local Address [ /ip/firewall/address-list/get \$Entry address ];\\r
- \r\\r
- \n :local Branch [ \$GetBranch \$Address ];\r\\r
- \n :local TimeOut (\$IPv4Addresses->\$Branch->\$Address);\r\\r
- \n :if ([ :typeof \$TimeOut ] = \"time\") do={\r\\r
- \n :log debug (\$ScriptName . \" Renewing IPv4 address \" . \$Addre\\r
- ss . \\\r\\r
- \n \" in list '\" . \$FwListName . \"' with \" . \$TimeOut . \"\\r
- .\");\r\\r
- \n /ip/firewall/address-list/set \$Entry timeout=\$TimeOut;\r\\r
- \n :set (\$IPv4Addresses->\$Branch->\$Address);\r\\r
- \n :set CntRenew (\$CntRenew + 1);\r\\r
- \n } else={\r\\r
- \n :if (\$Failure = false) do={\r\\r
- \n :log debug (\$ScriptName . \" Removing IPv4 address \" . \$Add\\r
- ress . \\\r\\r
- \n \" from list '\" . \$FwListName . \".\");\r\\r
- \n /ip/firewall/address-list/remove \$Entry;\r\\r
- \n :set CntRemove (\$CntRemove + 1);\r\\r
- \n }\r\\r
- \n }\r\\r
- \n }\r\\r
- \n\r\\r
- \n :foreach Entry in=[ /ipv6/firewall/address-list/find where \\\r\\r
- \n list=\$FwListName comment=\$ListComment ] do={\r\\r
- \n :local Address [ /ipv6/firewall/address-list/get \$Entry address ]\\r
- ;\r\\r
- \n :local Branch [ \$GetBranch \$Address ];\r\\r
- \n :local TimeOut (\$IPv6Addresses->\$Branch->\$Address);\r\\r
- \n :if ([ :typeof \$TimeOut ] = \"time\") do={\r\\r
- \n :log debug (\$ScriptName . \" Renewing IPv6 address \" . \$Addre\\r
- ss . \\\r\\r
- \n \" in list '\" . \$FwListName . \"' with \" . \$TimeOut . \"\\r
- .\");\r\\r
- \n /ipv6/firewall/address-list/set \$Entry timeout=\$TimeOut;\r\\r
- \n :set (\$IPv6Addresses->\$Branch->\$Address);\r\\r
- \n :set CntRenew (\$CntRenew + 1);\r\\r
- \n } else={\r\\r
- \n :if (\$Failure = false) do={\r\\r
- \n :log debug (\$ScriptName . \" Removing IPv6 address \" . \$Add\\r
- ress . \\\r\\r
- \n \" from list '\" . \$FwListName .\".\");\r\\r
- \n /ipv6/firewall/address-list/remove \$Entry;\r\\r
- \n :set CntRemove (\$CntRemove + 1);\r\\r
- \n }\r\\r
- \n }\r\\r
- \n }\r\\r
- \n\r\\r
- \n :foreach BranchName,Branch in=\$IPv4Addresses do={\r\\r
- \n :log debug (\$ScriptName . \" Handling branch: \" . \$BranchName);\\r
- \r\\r
- \n :foreach Address,Timeout in=\$Branch do={\r\\r
- \n :log debug (\$ScriptName . \" Adding IPv4 address \" . \$Address\\r
- \_. \\\r\\r
- \n \" to list '\" . \$FwListName . \"' with \" . \$Timeout . \"\\r
- .\");\r\\r
- \n :onerror Err {\r\\r
- \n /ip/firewall/address-list/add list=\$FwListName comment=\$List\\r
- Comment \\\r\\r
- \n address=\$Address timeout=\$Timeout;\r\\r
- \n :set CntAdd (\$CntAdd + 1);\r\\r
- \n } do={\r\\r
- \n :log warning (\$ScriptName . \" Failed to add IPv4 address \" \\r
- . \$Address . \\\r\\r
- \n \" to list '\" . \$FwListName . \"': \" . \$Err);\r\\r
- \n }\r\\r
- \n }\r\\r
- \n }\r\\r
- \n\r\\r
- \n :foreach BranchName,Branch in=\$IPv6Addresses do={\r\\r
- \n :log debug (\$ScriptName . \" Handling branch: \" . \$BranchName);\\r
- \r\\r
- \n :foreach Address,Timeout in=\$Branch do={\r\\r
- \n :log debug (\$ScriptName . \" Adding IPv6 address \" . \$Address\\r
- \_. \\\r\\r
- \n \" to list '\" . \$FwListName . \"' with \" . \$Timeout . \"\\r
- .\");\r\\r
- \n :onerror Err {\r\\r
- \n /ipv6/firewall/address-list/add list=\$FwListName comment=\$Li\\r
- stComment \\\r\\r
- \n address=\$Address timeout=\$Timeout;\r\\r
- \n :set CntAdd (\$CntAdd + 1);\r\\r
- \n } do={\r\\r
- \n :log warning (\$ScriptName . \" Failed to add IPv6 address \" \\r
- . \$Address . \\\r\\r
- \n \" to list '\" . \$FwListName . \"': \" . \$Err);\r\\r
- \n }\r\\r
- \n }\r\\r
- \n }\r\\r
- \n\r\\r
- \n :log info (\$ScriptName . \" list: \" . \$FwListName . \\\r\\r
- \n \" (\" . [ \$HumanReadableNum (\$CntAdd + \$CntRenew) 1000 ] . \\r
- \")\" . \\\r\\r
- \n \" -- added: \" . [ \$HumanReadableNum \$CntAdd 1000 ] . \\\r\\r
- \n \" - renewed: \" . [ \$HumanReadableNum \$CntRenew 1000 ] . \\\r\\r
- \n \" - removed: \" . [ \$HumanReadableNum \$CntRemove 1000 ]);\r\\r
- \n }\r\\r
- \n} do={\r\\r
- \n :global ExitError; \$ExitError \$ExitOK [ :jobname ] \$Err;\r\\r
- \n}\r\\r
- \n"\r
+ \n:global dec2hex do={\\r
+ \n :local hex \"\"\\r
+ \n :local dec [:tonum \$1]\\r
+ \n :for i from=0 to=4 step=4 do={\\r
+ \n :set hex ([:pick \"0123456789ABCDEF\" ((\$dec>>\$i)&0xf) (((\$de\\r
+ c>>\$i)&0xf)+1)].\$hex)\\r
+ \n }\\r
+ \n :return ([:tostr \$hex])\\r
+ \n}"\r
/user group\r
add name=backup policy="telnet,ssh,ftp,read,write,policy,test,sniff,sensitive,\\r
!local,!reboot,!winbox,!password,!web,!api,!romon,!rest-api"\r
-/caps-man provisioning\r
-add action=create-dynamic-enabled hw-supported-modes=gn master-configuration=\\r
- cfg-2ghz name-format=prefix-identity name-prefix=2ghz\r
-add action=create-dynamic-enabled hw-supported-modes=ac master-configuration=\\r
- cfg-5ghz-ac name-format=prefix-identity name-prefix=5ghz-ac\r
-add action=create-dynamic-enabled hw-supported-modes=an master-configuration=\\r
- cfg-5ghz-an name-format=prefix-identity name-prefix=5ghz-an\r
-/certificate settings\r
-set builtin-trust-store=fetch\r
-/disk settings\r
-set auto-media-interface=lo default-mount-point-template=usb1\r
/ip smb\r
-set comment=MikroVados domain=WORKGROUP enabled=yes interfaces=Bridge-LAN\r
+set enabled=no interfaces=lo\r
/interface bridge port\r
-add bridge=Bridge-LAN ingress-filtering=no interface=ether2 \\r
- internal-path-cost=10 path-cost=10\r
-add bridge=Bridge-LAN comment=LEN ingress-filtering=no interface=ether3 \\r
- internal-path-cost=10 path-cost=10\r
-add bridge=Bridge-LAN comment=NUC ingress-filtering=no interface=ether4 \\r
- internal-path-cost=10 path-cost=10\r
-add bridge=Bridge-LAN ingress-filtering=no interface=ether5 \\r
- internal-path-cost=10 path-cost=10\r
+add bridge=Bridge-LAN interface=ether5 trusted=yes trusted-dhcpv6=yes\r
+add bridge=Bridge-LAN interface=ether2\r
+add bridge=Bridge-LAN interface=ether4 trusted-dhcpv6=yes trusted-ra=yes\r
+add bridge=Bridge-LAN interface=ether3\r
+add bridge=Bridge-LAN interface=wlan2\r
+add bridge=Bridge-LAN interface=wlan1\r
+/interface bridge settings\r
+# ipv6 neighbor configuration has changed, please restart the device in order to apply the new settings\r
+set use-ip-firewall=yes\r
/ip firewall connection tracking\r
+# ipv6 neighbor configuration has changed, please restart the device in order to apply the new settings\r
set udp-timeout=10s\r
/ip neighbor discovery-settings\r
-set discover-interface-list=LAN\r
+# ipv6 neighbor configuration has changed, please restart the device in order to apply the new settings\r
+set discover-interface-list=LAN lldp-med=no lldp-poe-power=no protocol=""\r
/ip settings\r
-set max-neighbor-entries=8192 secure-redirects=no\r
+# ipv6 neighbor configuration has changed, please restart the device in order to apply the new settings\r
+set accept-redirects=yes ipv4-multipath-hash-policy=l4 max-neighbor-entries=\\r
+ 8192\r
/ipv6 settings\r
-set disable-ipv6=yes max-neighbor-entries=8192\r
+# ipv6 neighbor configuration has changed, please restart the device in order to apply the new settings\r
+set allow-fast-path=no disable-ipv6=yes disable-link-local-address=yes \\r
+ max-neighbor-entries=8192 multipath-hash-policy=l4\r
/interface detect-internet\r
-set detect-interface-list=WAN internet-interface-list=WAN lan-interface-list=\\r
- LAN wan-interface-list=WAN\r
+set detect-interface-list=WAN internet-interface-list=Internet \\r
+ lan-interface-list=LAN wan-interface-list=WAN\r
/interface l2tp-server server\r
set authentication=mschap2 use-ipsec=yes\r
/interface list member\r
-add comment=WAN interface="ether1 - Unet" list=WAN\r
+add interface="ether1 - Unet" list=WAN\r
add interface=Bridge-LAN list=LAN\r
-/interface ovpn-server server\r
-add auth=sha1,md5 mac-address=FE:82:A5:78:8E:84 name=ovpn-server1\r
-/interface wifi cap\r
-set caps-man-addresses=10.30.30.10 certificate=request discovery-interfaces=\\r
- wlan1,wlan2 lock-to-caps-man=no slaves-static=no\r
-/interface wifi capsman\r
-set package-path="" require-peer-certificate=no upgrade-policy=none\r
-/interface wifi provisioning\r
-add action=create-dynamic-enabled disabled=no master-configuration=2G-N \\r
- name-format=2G-%I slave-configurations=2G-G supported-bands=\\r
- 2ghz-n,2ghz-g,2ghz-g\r
-add action=create-dynamic-enabled disabled=no master-configuration=5G-AC \\r
- name-format=5G-%I supported-bands=5ghz-ac,5ghz-ac\r
/interface wireguard peers\r
-add allowed-address=10.8.0.2/32,0.0.0.0/0 client-allowed-address=0.0.0.0/0 \\r
- endpoint-address=89.110.101.17 endpoint-port=29185 interface=WG name=\\r
- MikroVados persistent-keepalive=10s public-key=\\r
+add allowed-address=0.0.0.0/0 client-allowed-address=0.0.0.0/0 disabled=yes \\r
+ interface=WG name=MikroVados persistent-keepalive=10s public-key=\\r
"64Y25EUZQQt8EIeAJYD8qWt+te8qvGEepnswdBgmzlY="\r
+add allowed-address=0.0.0.0/0 client-address=10.8.0.1/24 \\r
+ client-allowed-address=0.0.0.0/0 client-dns=8.8.8.8 client-endpoint=\\r
+ 146.120.64.211 client-keepalive=10s interface=WG name=GitHub \\r
+ persistent-keepalive=10s public-key=\\r
+ "HTofQ0KtUsZij7zFn0F72r8oatxGn/el6bzLhM9El1g=" responder=yes\r
/interface wireless cap\r
-# \r
set bridge=Bridge-LAN caps-man-addresses=10.30.30.10 \\r
caps-man-certificate-common-names=CAPsMAN-51B25E507D07 certificate=\\r
- CAP-18FD746E5814 discovery-interfaces=Bridge-LAN enabled=yes interfaces=\\r
- wlan1,wlan2 lock-to-caps-man=yes\r
-/interface wireless sniffer\r
-set file-name=24g\r
+ CAP-488F5A8E1ABC interfaces=wlan2,wlan1 lock-to-caps-man=yes\r
/ip address\r
+add address=10.8.0.2 interface=WG network=10.8.0.0\r
add address=10.30.30.81/24 interface=Bridge-LAN network=10.30.30.0\r
-add address=10.8.0.2/24 interface=WG network=10.8.0.0\r
+/ip cloud\r
+set update-time=no\r
/ip dhcp-client\r
-add add-default-route=special-classless default-route-distance=2 \\r
- default-route-tables=main interface="ether1 - Unet" name="ether1 - Unet" \\r
- use-peer-dns=no\r
+add default-route-tables=main dhcp-options=hostname,clientid,clientid_duid \\r
+ interface="ether1 - Unet" name=client1 use-broadcast=never use-peer-dns=\\r
+ no use-peer-ntp=no\r
/ip dhcp-server config\r
set accounting=no\r
/ip dhcp-server lease\r
10:B1:DF:E9:D0:D5 server=masterDHCP\r
add address=10.30.30.111 client-id=1:fe:2:52:be:3f:16 mac-address=\\r
FE:02:52:BE:3F:16 server=masterDHCP\r
+add address=10.30.30.92 client-id=1:d4:6d:6d:fd:e5:49 mac-address=\\r
+ D4:6D:6D:FD:E5:49 server=masterDHCP\r
add address=10.30.30.93 client-id=1:7e:8b:1e:cb:b8:cb mac-address=\\r
CC:42:10:12:46:94 server=masterDHCP\r
add address=10.30.30.94 client-id=1:50:cc:f8:85:96:a mac-address=\\r
50:CC:F8:85:96:0A server=masterDHCP\r
add address=10.30.30.82 client-id=1:e4:18:6b:58:34:ab mac-address=\\r
E4:18:6B:58:34:AB server=masterDHCP\r
+add address=10.30.30.75 client-id=1:0:27:15:41:97:a9 mac-address=\\r
+ 00:27:15:41:97:A9 server=masterDHCP\r
add address=10.30.30.77 dhcp-option=HostName dhcp-option-set=StartLife1 \\r
mac-address=C4:82:E1:03:49:10 server=masterDHCP\r
add address=10.30.30.73 client-id=1:10:38:1f:82:81:f2 mac-address=\\r
dhcp-option-set=VADOS-LEN mac-address=C8:5B:76:D8:CC:BF server=masterDHCP\r
add address=10.30.30.96 client-id=iPhone mac-address=4A:91:ED:0E:1F:39 \\r
server=masterDHCP\r
-add address=10.30.30.74 client-id=1:20:72:a9:d3:34:36 dhcp-option=HostName \\r
- dhcp-option-set=MiTV mac-address=20:72:A9:D3:34:36 server=masterDHCP \\r
- use-src-mac=yes\r
+add address=10.30.30.74 client-id=MiTV dhcp-option=HostName dhcp-option-set=\\r
+ MiTV mac-address=20:72:A9:D3:34:36 server=masterDHCP\r
add address=10.30.30.30 dhcp-option=HostName dhcp-option-set=miller \\r
mac-address=F0:75:5D:1E:5F:71 server=masterDHCP\r
add address=10.30.30.100 client-id=iVados dhcp-option=HostName \\r
dhcp-option-set="=\"Client ID\"" mac-address=DE:4D:72:F3:1A:9F server=\\r
masterDHCP\r
-add address=10.30.30.86 dhcp-option=HostName dhcp-option-set=MikroYellow \\r
- mac-address=48:8F:5A:8E:1A:C2 server=masterDHCP\r
/ip dhcp-server network\r
-add address=10.30.30.0/24 caps-manager=10.30.30.10 dhcp-option=HostName \\r
- dhcp-option-set=domain-search-set dns-server=10.30.30.81 domain=WORKGROUP \\r
- gateway=10.30.30.81 netmask=24 ntp-server=10.30.30.81,10.30.30.10 \\r
- wins-server=10.30.30.95,10.30.30.98\r
+add address=10.30.30.0/24 caps-manager=10.30.30.10 dhcp-option=\\r
+ domain-search-list dhcp-option-set=domain-search-set dns-server=\\r
+ 10.30.30.81 domain=WORKGROUP gateway=10.30.30.81 netmask=24 ntp-server=\\r
+ 10.30.30.81,10.30.30.10 wins-server=10.30.30.95,10.30.30.98\r
/ip dns\r
set allow-remote-requests=yes cache-max-ttl=1d doh-max-concurrent-queries=100 \\r
- doh-max-server-connections=20 servers=8.8.8.8,8.8.4.4 verify-doh-cert=yes\r
+ doh-max-server-connections=20 servers=8.8.8.8,8.8.4.4\r
+/ip dns adlist\r
+add disabled=yes url=https://ros.vados.ru/dns/vados.ru.local\r
+add disabled=yes url=https://ros.vados.ru/dns/30.30.10.in-addr.arpa\r
/ip dns static\r
-add address=10.30.30.33 name=amster-nuc type=A\r
+add comment="Local DNS server for vados.ru" ns=10.30.30.81 regexp=*.vados.ru \\r
+ type=NS\r
+add comment="*.vados.ru Regexp" forward-to=10.30.30.81 regexp=\\r
+ "\".*\\\\.vados\\\\.ru\"" type=FWD\r
+add comment="*.30.30.10.in-addr.arpa Regexp" forward-to=10.30.30.81 regexp=\\r
+ "\".*\\\\.30\\\\.30\\\\.10\\\\.in-addr\\\\.arpa" type=FWD\r
+add address=10.30.30.81 comment=NS.vados.ru.local name=ns.vados.ru.local \\r
+ type=A\r
+add comment="DNS ns.vados.ru.local" match-subdomain=yes name=vados.ru ns=\\r
+ ns.vados.ru.local type=NS\r
+add address=10.30.30.33 comment=reg.vados.ru name=reg.vados.ru type=A\r
+add address=8.8.8.8 comment="Google-dns IPv4 1" match-subdomain=yes name=\\r
+ dns.google type=A\r
+add address=8.8.4.4 comment="Google-dns IPv4 2" name=dns.google type=A\r
add address=10.30.30.33 comment=AMSTER name=amster.vados.ru type=A\r
+add address=10.30.30.33 name=ros.vados.ru type=A\r
+add address=10.30.30.95 name=vados-nuc type=A\r
+add address=10.30.30.33 name=amster-nuc type=A\r
add address=10.30.30.33 name=amster type=A\r
add address=10.30.30.33 name=amster-reg type=A\r
add address=10.30.30.33 name=mng.vados.ru type=A\r
add address=10.30.30.33 name=mgr.vados.ru type=A\r
add address=10.30.30.33 name=prt.vados.ru type=A\r
-add address=10.30.30.33 name=git.vados.ru type=A\r
-add address=10.30.30.33 name=reg.vados.ru type=A\r
-add address=10.30.30.33 match-subdomain=yes name=ros.vados.ru type=A\r
add address=10.30.30.33 match-subdomain=yes name=mikrots.vados.ru type=A\r
-add address=10.30.30.33 name=oxidized.vados.ru type=A\r
-add address=8.8.4.4 comment="Google-dns IPv4 2" name=dns.google type=A\r
-add address=8.8.8.8 comment="Google-dns IPv4 1" name=dns.google type=A\r
add address=10.30.30.30 comment=MILLER name=miller.vados.ru type=A\r
add address=10.30.30.30 name=MILLER-LEN type=A\r
add address=10.30.30.30 name=miller type=A\r
-add address=1.1.1.1 comment="CloudFlare-doh IPv4 1" name=\\r
+add address=1.0.0.1 comment="CloudFlare-doh IPv4 2" disabled=yes name=\\r
security.cloudflare-dns.com type=A\r
-add address=1.0.0.1 comment="CloudFlare-doh IPv4 2" name=\\r
+add address=1.1.1.1 comment="CloudFlare-doh IPv4 1" disabled=yes name=\\r
security.cloudflare-dns.com type=A\r
add address=9.9.9.9 comment="Cuad9-dns IPv4 1" disabled=yes name=\\r
dns.quad9.net type=A\r
add address=149.112.112.112 comment="Cuad9-dns IPv4 2" disabled=yes name=\\r
dns.quad9.net type=A\r
-add address=91.192.189.2 comment=Unet-DNS disabled=yes name=ns1.unet.ws type=\\r
- A\r
+add address=195.133.25.16 comment="DNS Comss" name=dns.comss.one type=A\r
add address=10.30.30.81 comment=LocalNet name=MikroVados type=A\r
add address=10.30.30.10 name=MikroNUC type=A\r
add address=10.30.30.86 name=MikroYellow type=A\r
add address=10.30.30.85 name=MikroMic type=A\r
add address=10.30.30.95 name=VADOS-NUC type=A\r
add address=10.30.30.98 name=VADOS-LEN type=A\r
+add address=91.192.189.2 comment=Unet-DNS name=ns1.unet.ws type=A\r
add address=10.30.30.20 name=garage type=A\r
-add address=2606:4700:4700::1111 disabled=yes name=\\r
- security.cloudflare-dns.com type=AAAA\r
-add address=2606:4700:4700::1001 disabled=yes name=\\r
- security.cloudflare-dns.com type=AAAA\r
/ip firewall address-list\r
add address=91.215.120.206 list=TRUSTED\r
add address=185.71.70.78 disabled=yes list=TRUSTED\r
add address=176.53.203.171 disabled=yes list=TRUSTED\r
add address=176.53.203.170 disabled=yes list=TRUSTED\r
add address=176.53.202.194 disabled=yes list=TRUSTED\r
-add address=10.30.30.100-255 list=KIDS\r
add address=8.8.4.0/24 list=YouTube\r
add address=8.8.8.0/24 list=YouTube\r
add address=8.34.208.0/20 list=YouTube\r
add address=216.58.192.0/19 list=YouTube\r
add address=216.73.80.0/20 list=YouTube\r
add address=216.239.32.0/19 list=YouTube\r
-add address=2ip.ru list=Test\r
-add address=157.240.247.174 list=Instagram\r
-add address=46.53.178.107 list=Instagram\r
-add address=179.60.195.174 list=Instagram\r
-add address=157.240.205.174 list=Instagram\r
-add address=31.13.24.0/21 list=Instagram\r
-add address=31.13.64.0/18 list=Instagram\r
-add address=45.64.40.0/22 list=Instagram\r
-add address=66.220.144.0/20 list=Instagram\r
-add address=69.63.176.0/20 list=Instagram\r
-add address=69.171.224.0/19 list=Instagram\r
-add address=74.119.76.0/22 list=Instagram\r
-add address=103.4.96.0/22 list=Instagram\r
-add address=129.134.0.0/16 list=Instagram\r
-add address=157.240.0.0/16 list=Instagram\r
-add address=173.252.64.0/18 list=Instagram\r
-add address=179.60.192.0/22 list=Instagram\r
-add address=185.60.216.0/22 list=Instagram\r
-add address=204.15.20.0/22 list=Instagram\r
-add address=157.240.200.63 list=Instagram\r
-add address=185.60.219.63 list=Instagram\r
-add address=129.134.31.12 list=Instagram\r
-add address=66.81.203.132 list=Instagram\r
-add address=185.89.218.12 list=Instagram\r
-add address=31.13.66.63 list=Instagram\r
-add address=84.15.65.162 list=Instagram\r
-add address=68.66.224.28 list=Instagram\r
-add address=157.240.253.63 list=Instagram\r
-add address=83.174.11.224 list=Instagram\r
-add address=157.240.9.52 list=Instagram\r
-add address=157.240.252.174 list=Instagram\r
-add address=157.240.195.63 list=Instagram\r
-add address=31.13.71.52 list=Instagram\r
-add address=57.144.110.192 list=Instagram\r
-add address=157.240.252.17 list=Instagram\r
-add address=84.15.66.97 list=Instagram\r
-add address=217.168.6.33 list=Instagram\r
-add address=31.13.83.52 list=Instagram\r
-add address=157.240.241.63 list=Instagram\r
-add address=129.134.30.12 list=Instagram\r
-add address=185.89.219.12 list=Instagram\r
-add address=157.240.252.10 list=Instagram\r
-add address=157.240.201.63 list=Instagram\r
-add address=66.81.203.197 list=Instagram\r
-add address=179.60.195.52 list=Instagram\r
-add address=66.81.203.7 list=Instagram\r
-add address=216.40.34.41 list=Instagram\r
-add address=157.240.202.63 list=Instagram\r
-add address=157.240.229.63 list=Instagram\r
-add address=157.240.252.63 list=Instagram\r
-add address=31.13.72.53 list=Instagram\r
-add address=124.108.16.224 list=Instagram\r
-add address=157.240.205.63 list=Instagram\r
-add address=92.46.37.96 list=Instagram\r
-add address=157.240.247.63 list=Instagram\r
-add address=157.240.234.63 list=Instagram\r
-add address=157.240.235.63 list=Instagram\r
-add address=87.245.208.97 list=Instagram\r
-add address=216.58.192.0/19 list=Instagram\r
-add address=209.85.128.0/17 list=Instagram\r
-add address=198.105.240.0/20 list=Instagram\r
-add address=173.194.0.0/16 list=Instagram\r
-add address=172.217.0.0/16 list=Instagram\r
-add address=142.250.0.0/15 list=Instagram\r
-add address=108.177.0.0/17 list=Instagram\r
-add address=87.245.197.140 list=Instagram\r
-add address=74.125.0.0/16 list=Instagram\r
-add address=64.233.160.0/19 list=Instagram\r
-add address=157.240.0.1 list=Instagram\r
-add address=157.240.238.63 list=Instagram\r
-add address=157.240.238.174 list=Instagram\r
-add address=157.240.0.63 list=Instagram\r
-add address=157.240.224.63 list=Instagram\r
-add address=157.240.224.174 list=Instagram\r
-add address=157.240.251.36 list=Instagram\r
-add address=157.240.253.12 list=Instagram\r
-add address=157.240.253.35 list=Instagram\r
-add address=157.240.238.13 list=Instagram\r
-add address=157.240.238.56 list=Instagram\r
-add address=157.240.238.175 list=Instagram\r
-add address=57.144.112.141 list=Instagram\r
-add address=157.240.251.60 list=Instagram\r
-add address=157.240.251.128 list=Instagram\r
-add address=157.240.238.5 list=Instagram\r
-add address=157.240.253.13 list=Instagram\r
-add address=157.240.253.5 list=Instagram\r
-add address=157.240.238.2 list=Instagram\r
-add address=157.240.238.37 list=Instagram\r
-add address=157.240.251.5 list=Instagram\r
-add address=157.240.251.34 list=Instagram\r
-add address=57.144.112.1 list=Instagram\r
-add address=157.240.238.54 list=Instagram\r
-add address=129.134.26.123 list=Instagram\r
-add address=157.240.252.3 list=Instagram\r
-add address=31.13.84.4 list=Instagram\r
-add address=157.240.224.12 list=Instagram\r
-add address=157.240.238.4 list=Instagram\r
-add address=157.240.0.13 list=Instagram\r
-add address=3.33.139.32 list=Instagram\r
-add address=157.240.0.35 list=Instagram\r
-add address=157.240.238.14 list=Instagram\r
-add address=157.240.238.60 list=Instagram\r
-add address=57.144.112.145 list=Instagram\r
-add address=157.240.251.35 list=Instagram\r
-add address=151.101.84.159 list=Twitter\r
-add address=pbs.twimg.com list=Twitter\r
+add address=2ip.ru list=Test-IP\r
add address=89.110.101.17 comment=VDSIna list=TRUSTED\r
add address=10.8.0.0/24 comment="WG VDSIna" list=TRUSTED\r
add address=ikus.pesc.ru comment=ikus.pesc.ru list=NoVdsina\r
add address=vdsina.ru list=NoVdsina\r
add address=youla.ru list=NoVdsina\r
add address=kupiprodai.ru list=NoVdsina\r
-add address=myip.ru list=Test\r
+add address=myip.ru list=Test-IP\r
add address=geoip.co list=NoVdsina\r
-add address=x.com list=Twitter\r
-add address=facebook.com list=facebook\r
-add address=fbcd.net list=facebook\r
add address=comp-lenta.ru list=NoVdsina\r
add address=128.85.102.70 comment=update.microsoft.com list=\\r
windowsupdateslist\r
windowsupdateslist\r
add address=40.69.76.172 comment=array620.prod.do.dsp.mp.microsoft.com list=\\r
windowsupdateslist\r
-add address=82.202.162.184 comment=comp-lenta.ru list=NoWG\r
-add address=smtp.mail.me.com.akadns.net. comment=smtp.mail.me.com list=NoWG\r
-add address=17.57.155.37 comment=smtp.mail.me.com.akadns.net list=NoWG\r
add address=smtp.mail.me.com comment=smtp.mail.me.com list=NoVdsina\r
add address=40.70.76.5 comment=array514.prod.do.dsp.mp.microsoft.com list=\\r
windowsupdateslist\r
windowsupdateslist\r
add address=tm-pifd-prod-gbl-weight.trafficmanager.net. comment=\\r
paymentinstruments.mp.microsoft.com list=windowsupdateslist\r
-add address=10.30.30.33 comment=amster-nuc disabled=yes list=NoWG\r
-add address=10.30.30.11 comment=MikroNUC list=NoWG\r
-add address=89.110.101.17 comment=!!!VDSINA!!!! list=NoWG\r
-add address=89.110.101.17 list=VPN-Server\r
+add address=10.30.30.33 comment=amster disabled=yes list=NoWG\r
+add address=10.30.30.10 comment=MikroNUC disabled=yes list=NoWG\r
+add address=89.110.101.17 comment=!!!VDSINA!!!! disabled=yes list=NoWG\r
+add address=wg.vados.ru comment=VDSina-vpn list=VDSina\r
add address=80.85.244.9 list=TRUSTED\r
-add address=8.8.8.8 list=TRUSTED\r
-add address=8.8.4.4 list=TRUSTED\r
add address=disc801.prod.do.dsp.mp.microsoft.com.edgekey.net. comment=\\r
disc801.prod.do.dsp.mp.microsoft.com list=windowsupdateslist\r
-add address=10.30.30.95 comment=NUC list=NoWG\r
-add address=glb.tas02.cws-prod.dcat.dsp.mp.microsoft.com. comment=\\r
- tas02.cws.update.microsoft.com list=windowsupdateslist\r
-add address=glb.cwsapp.prod.dcat.dsp.trafficmanager.net. comment=\\r
- glb.tas01.cwsapp-prod.dcat.dsp.mp.microsoft.com list=windowsupdateslist\r
-add address=glb.tas01.cwsapp-prod.dcat.dsp.mp.microsoft.com. comment=\\r
- tas01.cwsapp.update.microsoft.com list=windowsupdateslist\r
-add address=disc601.prod.do.dsp.mp.microsoft.com.edgekey.net. comment=\\r
- disc601.prod.do.dsp.mp.microsoft.com list=windowsupdateslist\r
+add address=185.71.70.78 disabled=yes list=TRUSTED\r
+add address=176.53.203.171 disabled=yes list=TRUSTED\r
+add address=176.53.203.170 disabled=yes list=TRUSTED\r
+add address=176.53.202.194 disabled=yes list=TRUSTED\r
+add address=89.110.101.17 comment="!!!VDSina Server!!!" list=NoVdsina\r
+add address=dns.quad9.net comment=Quad9-dns disabled=yes list=Trusted-DNS\r
+add address=dns.google comment=Google-dns list=Trusted-DNS\r
+add address=security.cloudflare-dns.com comment=CloudFlare-dns list=\\r
+ Trusted-DNS\r
+add address=time.google.com comment=Google-time list=Trusted-NTP\r
+add address=0.ru.pool.ntp.org comment=ru.pool.ntp.org disabled=yes list=\\r
+ Trusted-NTP\r
+add address=1.ru.pool.ntp.org disabled=yes list=Trusted-NTP\r
+add address=2.ru.pool.ntp.org comment=2.ru.pool.ntp.org disabled=yes list=\\r
+ Trusted-NTP\r
+add address=3.ru.pool.ntp.org comment=3.ru.pool.ntp.org disabled=yes list=\\r
+ Trusted-NTP\r
+add address=cp.vdsina.com comment=VDSina-vpn list=VDSina\r
+add address=vdsina.ru comment=VDSina-vpn list=VDSina\r
+add address=ns.vados.ru comment=VDSina-vpn list=VDSina\r
+add address=vdsina.com comment=VDSina-vpn list=VDSina\r
+add address=cp.vdsina.ru comment=VDSina-vpn list=VDSina\r
+add address=ns1.vdsina.ru comment=VDSina-vpn list=VDSina\r
+add address=10.30.30.0/24 comment="Local Network" list=Local-Net\r
+add address=10.8.0.0/24 comment="WireGuard Network" list=Local-Net\r
+add address=146.120.64.208/29 comment="External Net" list=Unet\r
+add address=esia.gosuslugi.ru comment=esia.gosuslugi.ru list=NoVdsina\r
+add address=lk.gosuslugi.ru comment=lk.gosuslugi.ru list=NoVdsina\r
+add address=trudvsem.ru comment=trudvsem.ru list=NoVdsina\r
+add address=10.30.30.30 comment=miller disabled=yes list=NoWG\r
+add address=10.30.30.33 comment="Direct connet to DNS servers" list=\\r
+ Direct-DNS\r
/ip firewall filter\r
add action=add-src-to-address-list address-list="Honeypot Hacker" \\r
address-list-timeout=12h chain=input comment="block honeypot DNS" \\r
connection-state=new dst-port=53 in-interface="ether1 - Unet" protocol=\\r
- udp\r
+ udp src-address-list=!Trusted-DNS\r
add action=add-src-to-address-list address-list="Honeypot Hacker" \\r
address-list-timeout=4w2d chain=input connection-state=new dst-port=53 \\r
- in-interface="ether1 - Unet" protocol=tcp\r
+ in-interface="ether1 - Unet" protocol=tcp src-address-list=!Trusted-DNS\r
add action=add-src-to-address-list address-list="Honeypot Hacker" \\r
address-list-timeout=4w2d chain=input comment=\\r
- "block honeypot ssh rdp winbox" connection-state=new dst-port=\\r
- 22,8291,2222 in-interface="ether1 - Unet" protocol=tcp src-address-list=\\r
- !TRUSTED\r
+ "block honeypot ssh rdp winbox" connection-state=new dst-port=22,8291 \\r
+ in-interface="ether1 - Unet" protocol=tcp src-address-list=!TRUSTED\r
add action=add-src-to-address-list address-list="Honeypot Hacker" \\r
address-list-timeout=4w2d chain=input comment="block honeypot asterisk" \\r
connection-state=new dst-port=5060 in-interface="ether1 - Unet" protocol=\\r
udp\r
add action=add-src-to-address-list address-list="Honeypot Hacker" \\r
- address-list-timeout=5d chain=input comment="block honeypot NTP" \\r
+ address-list-timeout=4w2d chain=input comment="block honeypot NTP" \\r
connection-state=new dst-port=123 in-interface="ether1 - Unet" protocol=\\r
- udp src-address=!10.30.30.0/24\r
-add action=accept chain=input comment=\\r
- "accept NTP clients on local area network" dst-port=123 in-interface=\\r
- Bridge-LAN in-interface-list=LAN protocol=udp\r
-add action=accept chain=input comment="accept WireGuard" dst-port=13231 \\r
- in-interface="ether1 - Unet" protocol=udp src-address-list=VPN-Server\r
-add action=accept chain=input disabled=yes dst-port=443 in-interface=\\r
- "ether1 - Unet" protocol=tcp\r
-add action=accept chain=output disabled=yes protocol=tcp src-port=443\r
+ udp\r
+add action=accept chain=input dst-port=29185 in-interface="ether1 - Unet" \\r
+ protocol=tcp\r
+add action=accept chain=input dst-port=29185 in-interface="ether1 - Unet" \\r
+ protocol=udp\r
+add action=accept chain=input comment="tcp Accept input DNS queries from LAN" \\r
+ disabled=yes dst-port=53 in-interface=Bridge-LAN protocol=tcp \\r
+ src-address=10.30.30.0/24\r
+add action=accept chain=input comment="udp Accept input DNS queries" \\r
+ disabled=yes dst-port=53 in-interface=Bridge-LAN protocol=udp \\r
+ src-address=10.30.30.0/24\r
add action=fasttrack-connection chain=forward comment=\\r
"FastTrack for non-VPN connections" connection-mark=!VPN_No_FastTrack \\r
connection-state=established,related,new disabled=yes\r
+add action=accept chain=output comment="accept WireGuard" disabled=yes \\r
+ dst-address-list=VPN-Server out-interface="ether1 - Unet" protocol=udp \\r
+ src-port=13231\r
+add action=accept chain=output disabled=yes dst-address-list=VPN-Server \\r
+ dst-port=29185 out-interface="ether1 - Unet" protocol=udp\r
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \\r
connection-state=established,related,new disabled=yes routing-mark=\\r
!To-VPN\r
-add action=accept chain=input comment=\\r
- "defconf: accept established,related,untracked" connection-state=\\r
- established,related,untracked\r
-add action=drop chain=input comment="defconf: drop invalid" connection-state=\\r
- invalid\r
-add action=accept chain=input comment="defconf: accept ICMP" disabled=yes \\r
- protocol=icmp\r
-add action=accept chain=input comment=\\r
- "defconf: accept to local loopback (for CAPsMAN)" disabled=yes \\r
- dst-address=127.0.0.1\r
+add action=accept chain=output disabled=yes protocol=tcp src-port=443\r
add action=accept chain=output disabled=yes src-address=127.0.0.1\r
add action=accept chain=forward comment="defconf: accept in ipsec policy" \\r
- ipsec-policy=in,ipsec\r
+ disabled=yes ipsec-policy=in,ipsec\r
add action=accept chain=forward comment="defconf: accept out ipsec policy" \\r
- ipsec-policy=out,ipsec\r
+ disabled=yes ipsec-policy=out,ipsec\r
add action=accept chain=forward comment=\\r
"defconf: accept established,related, untracked" connection-state=\\r
established,related,untracked\r
add action=drop chain=forward comment="defconf: drop invalid" \\r
- connection-state=invalid disabled=yes\r
+ connection-state=invalid in-interface="ether1 - Unet" src-address=\\r
+ !10.30.30.0/24\r
add action=drop chain=forward comment=\\r
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \\r
- connection-state=new in-interface="ether1 - Unet"\r
-add action=accept chain=input connection-state=established disabled=yes\r
-add action=accept chain=input connection-state=related disabled=yes\r
-add action=drop chain=input disabled=yes in-interface-list=!LAN\r
+ connection-state=new in-interface="ether1 - Unet" src-address-list=\\r
+ !VDSina\r
add action=drop chain=forward comment=\\r
"Filter Rule to block FB address LIST : )" disabled=yes dst-address-list=\\r
facebook\r
add action=drop chain=forward comment=\\r
"Filter Rule to block YOUTUBE address LIST : )" disabled=yes \\r
dst-address-list=YouTube\r
-add action=fasttrack-connection chain=forward comment=\\r
- "FastTrack main traffic" connection-state=established,related disabled=\\r
- yes\r
+add action=accept chain=input protocol=icmp\r
+add action=accept chain=input connection-state=established\r
+add action=accept chain=input connection-state=related\r
+add action=drop chain=input in-interface-list=!LAN\r
/ip firewall mangle\r
+add action=mark-routing chain=prerouting comment=\\r
+ "Mark Routing main for NoVdsina" disabled=yes dst-address=!10.30.30.0/24 \\r
+ dst-address-list=NoVdsina new-routing-mark=main passthrough=no \\r
+ src-address=10.30.30.0/24\r
+add action=mark-routing chain=prerouting comment=\\r
+ "Mark Routing main for VDSina" disabled=yes dst-address=!10.30.30.0/24 \\r
+ dst-address-list=VDSina new-routing-mark=main passthrough=no src-address=\\r
+ 10.30.30.0/24\r
+add action=mark-routing chain=prerouting comment=\\r
+ "!!!ERROR Mark Routing main for Unet!!!" disabled=yes dst-address-list=\\r
+ Unet new-routing-mark=main passthrough=no\r
+add action=mark-routing chain=prerouting comment="Test-IP sites" disabled=yes \\r
+ dst-address=!10.30.30.0/24 dst-address-list=Test-IP new-routing-mark=\\r
+ To-VPN src-address=10.30.30.0/24\r
+add action=mark-routing chain=prerouting comment=FuckRKN disabled=yes \\r
+ dst-address=!10.30.30.0/24 dst-address-list=RKN-dnsLookup \\r
+ new-routing-mark=To-VPN passthrough=no src-address=10.30.30.0/24\r
+add action=mark-routing chain=prerouting comment="Mark Routing main for NoWG" \\r
+ disabled=yes new-routing-mark=main passthrough=no src-address=\\r
+ 10.30.30.0/24 src-address-list=NoWG\r
+add action=mark-routing chain=prerouting comment="VDSIna for All sites" \\r
+ disabled=yes new-routing-mark=To-VPN src-address=10.30.30.0/24 \\r
+ src-address-list=!NoWG\r
add action=mark-connection chain=prerouting comment=\\r
- "Mark VPN connections to exclude from FastTrack" in-interface=WG \\r
- log-prefix=Mark-VPN-FT new-connection-mark=VPN_No_FastTrack\r
-add action=mark-routing chain=prerouting comment="Test sites" disabled=yes \\r
- dst-address=!10.30.30.0/24 dst-address-list=Test new-routing-mark=To-VPN \\r
+ "Mark VPN connections to exclude from FastTrack" disabled=yes \\r
+ new-connection-mark=VPN_No_FastTrack\r
+add action=change-mss chain=forward comment="MSS on WG" disabled=yes new-mss=\\r
+ 1380 out-interface=WG protocol=tcp routing-mark=To-VPN tcp-flags=syn \\r
+ tcp-mss=1381-65535\r
+add action=mark-routing chain=prerouting comment="VPN Network" disabled=yes \\r
+ dst-address=10.8.0.0/24 log-prefix=VPN-Net new-routing-mark=To-VPN \\r
passthrough=no src-address=10.30.30.0/24\r
-add action=mark-routing chain=prerouting comment=Instagram dst-address=\\r
- !10.30.30.0/24 dst-address-list=Instagram new-routing-mark=To-VPN \\r
- src-address=10.30.30.0/24 src-address-list=!NoWG\r
-add action=mark-routing chain=prerouting comment=Twitter dst-address=\\r
- !10.30.30.0/24 dst-address-list=Twitter new-routing-mark=To-VPN \\r
- src-address=10.30.30.0/24 src-address-list=!NoWG\r
-add action=mark-routing chain=prerouting comment=YouTube dst-address=\\r
- !10.30.30.0/24 dst-address-list=YouTube new-routing-mark=To-VPN \\r
- src-address=10.30.30.0/24 src-address-list=!NoWG\r
-add action=mark-routing chain=prerouting comment=facebook dst-address=\\r
- !10.30.30.0/24 dst-address-list=facebook new-routing-mark=To-VPN \\r
- src-address=10.30.30.0/24 src-address-list=!NoWG\r
-add action=mark-routing chain=prerouting comment=Telegram dst-address=\\r
- !10.30.30.0/24 dst-address-list=Telegram new-routing-mark=To-VPN \\r
- src-address=10.30.30.0/24 src-address-list=!NoWG\r
-add action=mark-routing chain=prerouting comment="VDSIna for All sites" \\r
- dst-address=!10.30.30.0/24 dst-address-list=!NoVdsina log-prefix=VPN-all \\r
- new-routing-mark=To-VPN src-address=10.30.30.0/24 src-address-list=!NoWG\r
-add action=change-mss chain=forward comment="MSS on WG" new-mss=1380 \\r
- out-interface=WG protocol=tcp tcp-flags=syn tcp-mss=1381-65535\r
-add action=mark-routing chain=prerouting comment="VPN Network" dst-address=\\r
- 10.8.0.0/24 dst-address-list=!NoVdsina log=yes log-prefix=VPN-Net \\r
- new-routing-mark=To-VPN src-address=10.30.30.0/24 src-address-list=!NoWG\r
/ip firewall nat\r
-add action=redirect chain=dstnat comment=\\r
- "FORCE DNS TO LOCAL MIKROTIK DNS SERVER" dst-port=53 protocol=tcp \\r
- src-address=10.30.30.0/24 to-ports=53\r
-add action=redirect chain=dstnat dst-port=53 protocol=udp src-address=\\r
- 10.30.30.0/24 to-ports=53\r
-add action=masquerade chain=srcnat comment="masquerade Default" ipsec-policy=\\r
- out,none out-interface="ether1 - Unet" routing-mark=!To-VPN\r
-add action=masquerade chain=srcnat comment=WG dst-address-list=!NoVdsina \\r
- in-interface=Bridge-LAN log-prefix=WG-nat out-interface=WG routing-mark=\\r
- To-VPN\r
-add action=dst-nat chain=dstnat comment=npm disabled=yes dst-port=81 \\r
- in-interface="ether1 - Unet" protocol=tcp to-addresses=10.30.30.33 \\r
- to-ports=81\r
-add action=dst-nat chain=dstnat comment=amster.vados.ruhttps disabled=yes \\r
- dst-port=443 in-interface="ether1 - Unet" protocol=tcp to-addresses=\\r
- 10.30.30.33 to-ports=443\r
+add action=redirect chain=dstnat comment="udp Redirect DNS in NAT" disabled=\\r
+ yes dst-port=53 protocol=udp src-address=10.30.30.0/24 to-addresses=\\r
+ 10.30.30.81 to-ports=53\r
+add action=redirect chain=dstnat comment="tcp Redirect DNS in NAT" disabled=\\r
+ yes dst-port=53 protocol=tcp src-address=10.30.30.0/24 to-addresses=\\r
+ 10.30.30.81 to-ports=53\r
+add action=masquerade chain=srcnat comment="Default NAT" out-interface=\\r
+ "ether1 - Unet" src-address=10.30.30.0/24\r
+add action=dst-nat chain=dstnat comment=amster.vados.ruhttps dst-port=443 \\r
+ fragment=no in-interface="ether1 - Unet" protocol=tcp src-address=\\r
+ !10.30.30.0/24 to-addresses=10.30.30.33 to-ports=443\r
+add action=dst-nat chain=dstnat comment="amster.vados.ru 3x-ui" disabled=yes \\r
+ dst-port=2904 in-interface="ether1 - Unet" protocol=tcp to-addresses=\\r
+ 10.30.30.33 to-ports=2904\r
+add action=dst-nat chain=dstnat comment=reg.vados.ru disabled=yes dst-port=\\r
+ 5000 in-interface="ether1 - Unet" protocol=tcp to-addresses=10.30.30.33 \\r
+ to-ports=5000\r
+add action=dst-nat chain=dstnat comment="Docker swarm" disabled=yes dst-port=\\r
+ 2377 in-interface="ether1 - Unet" protocol=tcp to-addresses=10.30.30.33 \\r
+ to-ports=2377\r
add action=dst-nat chain=dstnat comment="amster.vados.ru For Certbot HTTP" \\r
- disabled=yes dst-port=80 in-interface="ether1 - Unet" protocol=tcp \\r
- to-addresses=10.30.30.33 to-ports=80\r
-add action=dst-nat chain=dstnat disabled=yes dst-port=80 in-interface=\\r
- "ether1 - Unet" protocol=tcp to-addresses=10.30.30.33 to-ports=80\r
+ dst-port=80 in-interface="ether1 - Unet" protocol=tcp to-addresses=\\r
+ 10.30.30.33 to-ports=80\r
+add action=dst-nat chain=dstnat comment=npm dst-port=81 in-interface=\\r
+ "ether1 - Unet" protocol=tcp routing-mark=To-VPN to-addresses=10.30.30.33 \\r
+ to-ports=81\r
+add action=dst-nat chain=dstnat comment=SSH dst-port=22 in-interface=\\r
+ "ether1 - Unet" protocol=tcp src-address-list=TRUSTED to-addresses=\\r
+ 10.30.30.33 to-ports=22\r
+add action=masquerade chain=srcnat comment=WG disabled=yes dst-address-list=\\r
+ !NoVdsina out-interface=WG src-address-list=!NoWG\r
+add action=dst-nat chain=dstnat comment="portainer agent" disabled=yes \\r
+ dst-port=2377 in-interface="ether1 - Unet" protocol=tcp to-addresses=\\r
+ 10.30.30.33 to-ports=2377\r
+add action=dst-nat chain=dstnat disabled=yes dst-port=22 in-interface=\\r
+ "ether1 - Unet" protocol=tcp routing-mark=!To-VPN to-addresses=\\r
+ 10.30.30.33 to-ports=22\r
add action=dst-nat chain=dstnat comment="Yandex.DNS Family" disabled=yes \\r
dst-port=53 in-interface=Bridge-LAN protocol=udp src-address-list=KIDS \\r
time=6h-15m,sun,mon,tue,wed,thu,fri,sat to-addresses=77.88.8.3\r
add action=dst-nat chain=dstnat disabled=yes dst-port=53 in-interface=\\r
Bridge-LAN protocol=tcp src-address-list=KIDS time=\\r
6h-15m,sun,mon,tue,wed,thu,fri,sat to-addresses=77.88.8.3\r
-add action=dst-nat chain=dstnat dst-address=146.120.64.211 dst-port=32000 \\r
- in-interface="ether1 - Unet" protocol=tcp to-addresses=10.30.30.95 \\r
- to-ports=32000\r
-add action=dst-nat chain=dstnat dst-address=146.120.64.211 dst-port=32000 \\r
- in-interface="ether1 - Unet" protocol=udp to-addresses=10.30.30.95 \\r
- to-ports=32000\r
-add action=dst-nat chain=dstnat dst-port=32000 protocol=tcp routing-mark=\\r
- To-VPN to-addresses=10.30.30.95 to-ports=32000\r
-add action=dst-nat chain=dstnat dst-port=32000 protocol=udp routing-mark=\\r
- To-VPN to-addresses=10.30.30.95 to-ports=32000\r
/ip firewall raw\r
add action=drop chain=prerouting comment="Drop Honeypot Hackers" \\r
in-interface="ether1 - Unet" src-address-list="Honeypot Hacker"\r
+add action=accept chain=prerouting comment="Trusted DNS" disabled=yes \\r
+ in-interface-list=WAN src-address-list=Trusted-DNS\r
add action=add-dst-to-address-list address-list=NoVdsina \\r
address-list-timeout=none-dynamic chain=prerouting comment=\\r
extras.getpagespeed.com content=extras.getpagespeed.com disabled=yes\r
add action=add-dst-to-address-list address-list=NoVdsina \\r
address-list-timeout=none-dynamic chain=prerouting comment=linux.duke.edu \\r
content=linux.duke.edu disabled=yes\r
-add action=add-dst-to-address-list address-list=NoVdsina \\r
- address-list-timeout=none-dynamic chain=prerouting comment=vk.com \\r
- content=vk.com\r
-add action=add-dst-to-address-list address-list=NoVdsina \\r
- address-list-timeout=none-dynamic chain=prerouting comment=ok.ru content=\\r
- ok.ru\r
-add action=add-dst-to-address-list address-list=Instagram \\r
- address-list-timeout=none-dynamic chain=prerouting comment=Instagram \\r
- content=instagram.com\r
-add action=add-dst-to-address-list address-list=Twitter address-list-timeout=\\r
- none-dynamic chain=prerouting comment=Twitter content=twimg.com\r
-add action=add-dst-to-address-list address-list=Twitter address-list-timeout=\\r
- none-dynamic chain=prerouting content=x.com\r
-add action=add-dst-to-address-list address-list=Twitter address-list-timeout=\\r
- none-dynamic chain=prerouting content=twitter.com\r
-add action=add-dst-to-address-list address-list=YouTube address-list-timeout=\\r
- none-dynamic chain=prerouting comment=YouTube content=youtube.com\r
-add action=add-dst-to-address-list address-list=YouTube address-list-timeout=\\r
- none-dynamic chain=prerouting content=googleapis.com\r
-add action=add-dst-to-address-list address-list=YouTube address-list-timeout=\\r
- none-dynamic chain=prerouting content=ggpht.com\r
-add action=add-dst-to-address-list address-list=YouTube address-list-timeout=\\r
- none-dynamic chain=prerouting content=youtu.be\r
-add action=add-dst-to-address-list address-list=YouTube address-list-timeout=\\r
- none-dynamic chain=prerouting content=ytimg.com\r
-add action=add-dst-to-address-list address-list=YouTube address-list-timeout=\\r
- none-dynamic chain=prerouting content=googlevideo.com\r
-add action=add-dst-to-address-list address-list=YouTube address-list-timeout=\\r
- none-dynamic chain=prerouting content=gstatic.com\r
-add action=add-dst-to-address-list address-list=YouTube address-list-timeout=\\r
- none-dynamic chain=prerouting content=googleusercontent.com\r
-add action=add-dst-to-address-list address-list=YouTube address-list-timeout=\\r
- none-dynamic chain=prerouting content=nhacmp3youtube.com\r
+add action=add-dst-to-address-list address-list=FuckRKN address-list-timeout=\\r
+ none-dynamic chain=prerouting comment="YouTube raw" content=youtube.com \\r
+ disabled=yes\r
+add action=add-dst-to-address-list address-list=FuckRKN address-list-timeout=\\r
+ none-dynamic chain=prerouting comment="YouTube raw" content=\\r
+ googleapis.com disabled=yes\r
+add action=add-dst-to-address-list address-list=FuckRKN address-list-timeout=\\r
+ none-dynamic chain=prerouting comment="YouTube raw" content=ggpht.com \\r
+ disabled=yes\r
+add action=add-dst-to-address-list address-list=FuckRKN address-list-timeout=\\r
+ none-dynamic chain=prerouting comment="YouTube raw" content=youtu.be \\r
+ disabled=yes\r
+add action=add-dst-to-address-list address-list=FuckRKN address-list-timeout=\\r
+ none-dynamic chain=prerouting comment="YouTube raw" content=ytimg.com \\r
+ disabled=yes\r
+add action=add-dst-to-address-list address-list=FuckRKN address-list-timeout=\\r
+ none-dynamic chain=prerouting comment="YouTube raw" content=\\r
+ googlevideo.com disabled=yes\r
+add action=add-dst-to-address-list address-list=FuckRKN address-list-timeout=\\r
+ none-dynamic chain=prerouting comment="YouTube raw" content=gstatic.com \\r
+ disabled=yes\r
+add action=add-dst-to-address-list address-list=FuckRKN address-list-timeout=\\r
+ none-dynamic chain=prerouting comment="YouTube raw" content=\\r
+ googleusercontent.com disabled=yes\r
+add action=add-dst-to-address-list address-list=FuckRKN address-list-timeout=\\r
+ none-dynamic chain=prerouting comment="YouTube raw" content=\\r
+ nhacmp3youtube.com disabled=yes\r
add action=add-dst-to-address-list address-list=NoVdsina \\r
address-list-timeout=none-dynamic chain=prerouting comment=rutube.ru \\r
- content=rutube.ru\r
-add action=add-dst-to-address-list address-list=NoVdsina \\r
- address-list-timeout=none-dynamic chain=prerouting comment=me.com \\r
- content=me.com\r
+ content=rutube.ru disabled=yes\r
add action=add-dst-to-address-list address-list=NoVdsina \\r
- address-list-timeout=none-dynamic chain=prerouting comment=icloud.com \\r
- content=icloud.com\r
-add action=add-dst-to-address-list address-list=facebook \\r
- address-list-timeout=none-dynamic chain=prerouting comment=facebook \\r
- content=fbcd.net\r
-add action=add-dst-to-address-list address-list=facebook \\r
- address-list-timeout=none-dynamic chain=prerouting content=facebook.com\r
+ address-list-timeout=none-dynamic chain=prerouting comment="me.com raw" \\r
+ content=me.com disabled=yes\r
add action=add-dst-to-address-list address-list=NoVdsina \\r
- address-list-timeout=none-dynamic chain=prerouting comment=comp-lenta.ru \\r
- content=comp-lenta.ru\r
+ address-list-timeout=none-dynamic chain=prerouting comment=\\r
+ "icloud.com raw" content=icloud.com disabled=yes\r
add action=add-dst-to-address-list address-list=NoVdsina \\r
address-list-timeout=none-dynamic chain=prerouting comment=\\r
- smtp.mail.me.com content=smtp.mail.me.com log=yes\r
+ "smtp.mail.me.com raw" content=smtp.mail.me.com disabled=yes\r
add action=add-dst-to-address-list address-list=NoVdsina \\r
- address-list-timeout=none-dynamic chain=prerouting comment=gov.ru \\r
- content=gov.ru\r
+ address-list-timeout=none-dynamic chain=prerouting comment=\\r
+ "smtp.mail.me.com.akadns.net raw" content=smtp.mail.me.com.akadns.net \\r
+ disabled=yes\r
add action=add-dst-to-address-list address-list=NoVdsina \\r
address-list-timeout=none-dynamic chain=prerouting comment=\\r
- r78.fssp.gov.ru content=r78.fssp.gov.ru\r
+ "api.db-ip.com raw" content=api.db-ip.com disabled=yes\r
add action=add-dst-to-address-list address-list=NoVdsina \\r
- address-list-timeout=none-dynamic chain=prerouting comment=api.db-ip.com \\r
- content=api.db-ip.com\r
-add action=add-dst-to-address-list address-list=Telegram \\r
address-list-timeout=none-dynamic chain=prerouting comment=\\r
- api.telegram.org content=api.telegram.org\r
+ esia.gosuslugi.ru content=esia.gosuslugi.ru disabled=yes\r
+add action=add-dst-to-address-list address-list=NoVdsina \\r
+ address-list-timeout=none-dynamic chain=prerouting comment=gosuslugi.ru \\r
+ content=gosuslugi.ru disabled=yes\r
/ip firewall service-port\r
set ftp disabled=yes\r
set tftp disabled=yes\r
set sip disabled=yes\r
set pptp disabled=yes\r
set rtsp disabled=no\r
-/ip hotspot walled-garden\r
-add server=*1\r
/ip ipsec settings\r
set accounting=no\r
/ip ipsec policy\r
set cache-administrator="" max-cache-size=none port=80,443 src-address=\\r
0.0.0.0\r
/ip route\r
-add disabled=no distance=3 dst-address=192.168.0.0/24 gateway=l2tp-vpn\r
-add disabled=no distance=4 dst-address=192.168.5.0/24 gateway=l2tp-vpn\r
-add disabled=no distance=3 dst-address=192.168.0.0/24 gateway=l2tp-vpn\r
-add disabled=no distance=4 dst-address=192.168.5.0/24 gateway=l2tp-vpn\r
-add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=WG routing-table=\\r
- To-VPN scope=30 target-scope=10\r
-add disabled=yes distance=2 dst-address=0.0.0.0/0 gateway=146.120.64.209 \\r
- routing-table=main scope=30 target-scope=10\r
+add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\\r
+ WG routing-table=To-VPN scope=30 target-scope=10\r
/ip service\r
set ftp disabled=yes\r
set telnet disabled=yes\r
+set reverse-proxy disabled=yes\r
set ssh address=10.30.30.0/24 port=2222\r
set winbox address=10.30.30.0/24\r
set api address=10.30.30.0/24 disabled=yes\r
-set api-ssl address=10.30.30.0/24\r
-set www-ssl port=18443\r
+set api-ssl address=10.30.30.0/24 disabled=yes\r
+set www-ssl certificate=Root-YE port=18443\r
set www address=10.30.30.0/24 disabled=yes port=18880\r
/ip service webserver\r
set acme-plain=no crl-plain=no graphs-plain=no graphs-secure=no index-plain=\\r
set enabled=yes\r
/ip upnp interfaces\r
add interface=Bridge-LAN type=internal\r
-add interface="ether1 - Unet" type=external\r
-/ipv6 firewall address-list\r
-add address=::/128 comment="defconf: unspecified address" list=bad_ipv6\r
-add address=::1/128 comment="defconf: lo" list=bad_ipv6\r
-add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6\r
-add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6\r
-add address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6\r
-add address=100::/64 comment="defconf: discard only " list=bad_ipv6\r
-add address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6\r
-add address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6\r
-add address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6\r
-/ipv6 firewall filter\r
-add action=add-src-to-address-list address-list=bad_ipv6 \\r
- address-list-timeout=none-dynamic chain=input comment=\\r
- "defconf: accept established,related,untracked" connection-state=\\r
- established,related,untracked in-interface=WG in-interface-list=WAN \\r
- src-address-list=""\r
-add action=drop chain=input comment="defconf: drop invalid" connection-state=\\r
- invalid\r
-add action=accept chain=input comment="defconf: accept ICMPv6" protocol=\\r
- icmpv6\r
-add action=accept chain=input comment="defconf: accept UDP traceroute" \\r
- dst-port=33434-33534 protocol=udp\r
-add action=accept chain=input comment=\\r
- "defconf: accept DHCPv6-Client prefix delegation." dst-port=546 protocol=\\r
- udp src-address=fe80::/10\r
-add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 \\r
- protocol=udp\r
-add action=accept chain=input comment="defconf: accept ipsec AH" protocol=\\r
- ipsec-ah\r
-add action=accept chain=input comment="defconf: accept ipsec ESP" protocol=\\r
- ipsec-esp\r
-add action=accept chain=input comment=\\r
- "defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec\r
-add action=drop chain=input comment=\\r
- "defconf: drop everything else not coming from LAN" in-interface-list=\\r
- !LAN\r
-add action=accept chain=forward comment=\\r
- "defconf: accept established,related,untracked" connection-state=\\r
- established,related,untracked\r
-add action=drop chain=forward comment="defconf: drop invalid" \\r
- connection-state=invalid\r
-add action=drop chain=forward comment=\\r
- "defconf: drop packets with bad src ipv6" src-address-list=bad_ipv6\r
-add action=drop chain=forward comment=\\r
- "defconf: drop packets with bad dst ipv6" dst-address-list=bad_ipv6\r
-add action=drop chain=forward comment="defconf: rfc4890 drop hop-limit=1" \\r
- hop-limit=equal:1 protocol=icmpv6\r
-add action=accept chain=forward comment="defconf: accept ICMPv6" protocol=\\r
- icmpv6\r
-add action=accept chain=forward comment="defconf: accept HIP" protocol=139\r
-add action=accept chain=forward comment="defconf: accept IKE" dst-port=\\r
- 500,4500 protocol=udp\r
-add action=accept chain=forward comment="defconf: accept ipsec AH" protocol=\\r
- ipsec-ah\r
-add action=accept chain=forward comment="defconf: accept ipsec ESP" protocol=\\r
- ipsec-esp\r
-add action=accept chain=forward comment=\\r
- "defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec\r
-add action=drop chain=forward comment=\\r
- "defconf: drop everything else not coming from LAN" in-interface-list=\\r
- !LAN\r
+add forced-ip=146.120.64.211 interface="ether1 - Unet" type=external\r
+add forced-ip=89.110.101.17 interface=WG type=external\r
+add interface=lo type=internal\r
+/ipv6 dhcp-client\r
+add add-default-route=yes disabled=yes interface=*F rapid-commit=no request=\\r
+ info use-interface-duid=yes validate-server-duid=no\r
+/ipv6 dhcp-server option sets\r
+add name=domain-search-set options=domain-search-list\r
+add name="=\"Client ID\"" options=HostName\r
/ipv6 nd\r
-set [ find default=yes ] advertise-dns=yes\r
-/ppp secret\r
-add local-address=192.168.60.1 name=vados remote-address=192.168.60.2 \\r
- service=l2tp\r
-/routing bfd configuration\r
-add disabled=no\r
-/snmp\r
-set contact=@AmsterNL enabled=yes engine-id-suffix=MikroMaster location=NL \\r
- src-address=10.30.30.81 trap-interfaces=Bridge-LAN,WG trap-target=\\r
- 10.30.30.10\r
+set [ find default=yes ] advertise-dns=yes disabled=yes interface=Bridge-LAN \\r
+ managed-address-configuration=yes other-configuration=yes pref64=::/64\r
+/ipv6 nd prefix\r
+add autonomous=no disabled=yes interface=Bridge-LAN on-link=no prefix=none\r
+/ipv6 nd prefix default\r
+set dhcp6-pd-preferred=yes\r
+/ipv6 nd proxy\r
+add disabled=yes interface=lo\r
+/ipv6 nd settings\r
+set router-advertisement-route-distance=100\r
+/routing settings\r
+set single-process=no\r
/system clock\r
-set time-zone-autodetect=no time-zone-name=Europe/Moscow\r
+set time-zone-name=Europe/Moscow\r
/system clock manual\r
set time-zone=+03:00\r
/system identity\r
add address=2.ru.pool.ntp.org\r
add address=3.ru.pool.ntp.org\r
add address=time.google.com disabled=yes\r
+/system package update\r
+set check-certificate=yes-without-crl\r
/system scheduler\r
-add comment="Windows Update script" interval=2d5m name=WU-script-run-schedule \\r
- on-event=WU-add-to-list policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \\r
- start-date=2014-02-11 start-time=00:00:00\r
-add comment="Backup Every Week" disabled=yes interval=1w name=BackupEveryWeek \\r
- on-event=BackupAndUpdate policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \\r
- start-date=2025-07-07 start-time=03:41:27\r
-add comment="DoH Cache Flush" interval=1d name="DNS Cache Flush" on-event=\\r
- DNS_Flush_Cache policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \\r
- start-date=2019-12-06 start-time=05:30:00\r
-add comment="Create mkdir function on startup" name=\\r
- create_mkdir_function_on_startup on-event=\\r
- "/system script run create_mkdir_function;" policy=read,write,policy,test \\r
- start-time=startup\r
-add comment="Scheduler for Update Certificates CloudFlare Quad9" interval=1w \\r
- name="Update Certificates CloudFlare Quad9" on-event=\\r
- "/system/script { run Update-Certificates; }" policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \\r
- start-date=2025-11-28 start-time=05:45:40\r
-add comment="Setup Global Environment for scripts" name=AM-SetGlobalEnv \\r
+add comment="Every Day Set Global Environment Variables" name=AM-SetGlobalEnv \\r
on-event="/system/script { run AM-GlobalConfig; run AM-GlobalFunc; }" \\r
policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \\r
start-time=startup\r
":global ScriptInstallUpdate; \$ScriptInstallUpdate;" policy=\\r
ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \\r
start-time=startup\r
-add comment="Every Day Check For Fake Bridges" interval=1d name=\\r
- mod/AM-IPbridge on-event="/system/script/run mod/AM-IPbridge;" policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \\r
- start-time=startup\r
-add comment="Every Day Check For Renew Certificates" interval=1d name=\\r
- AM-CheckCerts on-event="/system/script/run AM-CheckCerts;" policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \\r
+add comment="Update RKN DNS Looup" disabled=yes interval=20m name=\\r
+ AM-RKN-dnsLookup on-event="/system/script { run AM-RKN-dnsLookup; }" \\r
+ policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \\r
start-time=startup\r
-add comment="Auto-update Cloudflare Root CA for DoH" interval=2w name=\\r
- AM-DOHCert on-event="/import AM-DOHCert.rsc" policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \\r
- start-date=2026-04-15 start-time=03:00:00\r
-add comment=\\r
- "Every 7 Day Check For Update and Backup send notification to EMail." \\r
- interval=1w name=AM-Backup-UpdateEmail on-event=\\r
- "/system/script { run AM-Backup-UpdateEmail; }" policy=\\r
- ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \\r
- start-date=2026-04-30 start-time=03:41:27\r
/system watchdog\r
set watchdog-timer=no\r
/tool e-mail\r
/tool mac-server mac-winbox\r
set allowed-interface-list=LAN\r
/tool netwatch\r
-add comment="doh, doh-url=https://security.cloudflare-dns.com/dns-query, notif\\r
- y, name=CloudFlare-doh IPv4 1" disabled=yes down-script="" host=1.1.1.1 \\r
- http-codes="" test-script="" type=simple up-script=""\r
+add certificate=DigiCert-Global-Root-CA check-certificate=no comment="doh, doh\\r
+ -url=https://security.cloudflare-dns.com/dns-query, notify, name=CloudFlar\\r
+ e-doh IPv4 1" disabled=yes down-script="" host=1.1.1.1 http-codes="" \\r
+ interval=10s name="CloudFlare-doh IPv4 1" port=443 test-script="" type=\\r
+ https-get up-script=""\r
add check-certificate=no comment="doh-fallback, doh-url=https://security.cloud\\r
flare-dns.com/dns-query, doh-cert=DigiCert Global Root CA, notify, name=Cl\\r
oudFlare-doh IPv4" disabled=yes down-script="" host=1.0.0.1 http-codes="" \\r
- port=443 test-script="" type=simple up-script=""\r
-add comment="dns-fallback, notify, name=Google-DNS IPv4" disabled=yes \\r
- down-script="" host=8.8.8.8 http-codes="" test-script="" type=simple \\r
+ name="CloudFlare-doh IPv4" port=443 test-script="" type=https-get \\r
up-script=""\r
-add comment="doh-fallback, doh-url=https://dns.google/dns-query, doh-cert=GTS \\r
- Root R1, notify, name=Google-DOH IPv4" disabled=yes down-script="" host=\\r
- 8.8.4.4 http-codes="" test-script="" type=simple up-script=""\r
-add comment="dns, notify, name=Cuad9-DOH IPv4" disabled=yes down-script="" \\r
- host=9.9.9.9 http-codes="" test-script="" type=simple up-script=""\r
-add comment="doh-fallback, doh-url=https://dns.quad9.net/dns-query, name=Cuad9\\r
- -DOH IPv4" disabled=yes down-script="" host=149.112.112.112 http-codes="" \\r
- test-script="" type=simple up-script=""\r
+add comment="dns, notify, name=Google-DNS IPv4" disabled=yes dns-server=\\r
+ 8.8.8.8 down-script="" host=dns.google http-codes="" name=\\r
+ "Google-DNS IPv4" test-script="" type=dns up-script=""\r
+add certificate=GTS-Root-R4 check-certificate=yes comment="doh-fallback, doh-u\\r
+ rl=https://dns.google/dns-query, doh-cert=GTS Root R1, notify, name=Google\\r
+ -DOH IPv4" disabled=yes dns-server=8.8.4.4 down-script="" host=dns.google \\r
+ http-codes="" name="Google-DOH IPv4" port=443 record-type=NS src-address=\\r
+ "" test-script="" type=dns up-script=""\r
+add comment="dns-fallback, notify, name=Cuad9-DOH IPv4" disabled=yes \\r
+ dns-server=9.9.9.9 down-script="" host=dns9.quad9.net http-codes="" \\r
+ interval=10s name="Cuad9-DOH IPv4" src-address=146.120.64.211 \\r
+ test-script="" timeout=800ms type=dns up-script=""\r
+add certificate=DigiCert-Assured-ID-Root-CA comment="doh-fallback, doh-url=htt\\r
+ ps://dns.quad9.net/dns-query, name=Cuad9-DOH IPv4" disabled=yes \\r
+ down-script="" host=149.112.112.112 http-codes="" interval=10s name=\\r
+ "Cuad9-DOH IPv4" port=443 test-script="" type=https-get up-script=""\r
add comment="dns-fallback, notify, name=ns1.unet.ws" disabled=yes \\r
- down-script="" host=91.192.189.2 http-codes="" test-script="" type=simple \\r
- up-script=""\r
-/tool sniffer\r
-set filter-interface=Bridge-LAN filter-src-ip-address=10.30.30.50/32\r
+ down-script="" host=91.192.189.2 http-codes="" interval=10s name=\\r
+ ns1.unet.ws test-script="" type=simple up-script=""\r
/user aaa\r
set accounting=no\r
git.vados.ru / Mikrotiks / ros.vados.ru.git / commitdiff
